Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- TCEP HCI
- Product Code
- M02624
Regulatory Identifiers
- CAS Number
- 51805-45-9 Check regulations →
Manufacturers & Suppliers
Fluorochem Ltd
national supplier
Unit 14,Graphite Way Hadfield Derbyshire SK13 1QH UK
+44(0)1457 860111
Emergency Contacts
Emergency Contact
+44(0)7855 268577
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| TCEP HCI | 51805-45-9 | 100% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
P304 + P340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P303 + P361 + P353: IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
Wash out mouth with water.
Immediate Medical Attention
No additional measures required
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Carbon dioxide. Dry chemical powder. Water.
Do not use water with a full water jet
In combustion toxic fumes may form.
Firefighter Protection
Wear protective clothing to prevent contact with skin and eyes. Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Do not discharge into drains or rivers.
Transfer to a suitable container.
Materials: sand or vermiculite
Related Products
Similar products with comparable safety profiles
CTEC C 3.01
---
TCPP
CAS: 1244733-77-4
EPTC
CAS: 759-94-4
HCH
CAS: 608-73-1
HiTEC® 5708 Performance Additive
UFI: 8C9Q-CM0P-742P-P8QF
HiTEC® 343 Performance Additive
UFI: P3KE-NQVK-QF2U-0VT1
HiTEC® 340 Performance Additive
UFI: FFRA-A9AQ-HT21-VCP5
HiTEC® 4032 Performance Additive
UFI: PD5R-R4HH-9756-V4AV
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Handle in fume hood. Wash hands immediately after contamination. P264: Wash hands thoroughly after handling.
Keep container tightly closed. Store in cool, well ventilated area. Keep in tightly closed container in cool area away from direct sunlight or heat sources.
Wash hands immediately after contamination. P264: Wash hands thoroughly after handling. P363: Wash contaminated clothing before reuse.
normal measures for preventive fire protection
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure there is sufficient ventilation of the area.
Protective gloves.
Safety Glasses.
P260: Do not breathe dust/fume/gas/mist/vapours/spray. Respiratory protection not required.
Protective clothing.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
no unusual reactivity
no hazardous reactions known
Heat.
Strong oxidizing agents.
In combustion emits toxic fumes. In combustion emits toxic fumes of carbon dioxide / carbon monoxide. In combustion emits toxic fumes of hydrogen chloride / phosgene. In combustion emits toxic fumes of phosphorus oxides.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Hand over to authorised disposal company as hazardous waste.
Consult state, local or national regulations for proper disposal.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3261
- Shipping Name
- Corrosive solid, acidic, organic, n.o.s.
- Transport Class
- 8
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
product is not subject to any additional regulations or provisions
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for TCEP HCI?
The signal word is danger.
What is the physical form of TCEP HCI?
TCEP HCI is a solid appearing as solid . It has typical odor.
What is the solubility of TCEP HCI?
Water. DMSO
What are the hazard statements for TCEP HCI?
This substance has 1 hazard statement:
- H314: Causes severe skin burns and eye damage.
What is the melting point of TCEP HCI?
The melting point is 174-176°C and the boiling point is No Data Available.