Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- FOMBLIN® Y LVAC
- Product Code
- 06/6; 14/6; 16/6; 25/6; 300
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Electronic industry, Electrical industry, Chemical industry, For industrial use only.
Manufacturers & Suppliers
SOLVAY SPECIALTY POLYMERS USA, LLC
manufacturer
4500 McGINNIS FERRY ROAD, ALPHARETTA GA 30005-3914, USA
(856) 853-8119
Emergency Contacts
CHEMTREC ®
1 (800) 424-9300
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Perfluorinated polyethers
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 1-Propene, 1,1,2,3,3,3-hexafluoro-, oxidized, polymd. | 69991-67-9 | 99.9% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air in case of accidental inhalation of fumes from overheating or combustion. Oxygen or artificial respiration if needed.
Wash off with soap and water.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes.
Drink 1 or 2 glasses of water. Do NOT induce vomiting.
Immediate Medical Attention
If eye irritation persists, consult a specialist. If symptoms persist, call a physician.
Medical Treatment
If eye irritation persists, consult a specialist. If symptoms persist, call a physician.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide local ventilation appropriate to the product decomposition risk (see section 10). Refer to protective measures listed in sections 7 and 8. Apply technical measures to comply with the occupational exposure limits. For additional information, consult the current edition of The Guide to the Safe Handling of Fluoropolymers published by the Society of Plastics Industry, Inc. (SPI) Fluoropolymer Division.
Latex gloves. Take note of the information given by the producer concerning permeability and break through times, and of special workplace conditions (mechanical strain, duration of contact).
Safety glasses with side-shields. If splashes are likely to occur, wear: Tightly fitting safety goggles
No personal respiratory protective equipment normally required. Use respirator when performing operations involving potential exposure to vapour of the product. Use only respiratory protection that conforms to international/ national standards. Use NIOSH approved respiratory protection. Comply with OSHA respiratory protection requirements.
Long sleeved clothing. Safety shoes
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for FOMBLIN® Y LVAC?
The signal word is no signal word.
What is the solubility of FOMBLIN® Y LVAC?
fluorinated solvents : soluble
What is FOMBLIN® Y LVAC used for?
Electronic industry, Electrical industry, Chemical industry, For industrial use only.
What is the melting point of FOMBLIN® Y LVAC?
The melting point is Not applicable and the boiling point is - 270 C ( 518 F ).