Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- FOMBLIN® Y LVAC
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
- Electronic industry - Electrical industry - Chemical industry - For industrial use only.
Manufacturers & Suppliers
SOLVAY SPECIALTY POLYMERS USA, LLC
manufacturer
4500 McGINNIS FERRY ROAD ALPHARETTA GA 30005-3914 USA
(856) 853-8119
Emergency Contacts
CHEMTREC ®
1 (800) 424-9300
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Perfluorinated polyethers
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 1-Propene, 1,1,2,3,3,3-hexafluoro-, oxidized, polymd. | 69991-67-9 | 99.9% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air in case of accidental inhalation of fumes from overheating or combustion. Oxygen or artificial respiration if needed.
Wash off with soap and water.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes.
Drink 1 or 2 glasses of water. Do NOT induce vomiting.
Immediate Medical Attention
If eye irritation persists, consult a specialist.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water, powder, Foam, Dry chemical, Carbon dioxide (CO2)
None.
The product is not flammable. Not explosive.
Evacuate personnel to safe areas. Approach from upwind. Protect intervention team with a water spray as they approach the fire. Keep containers and surroundings cool with water spray.
Firefighter Protection
Wear self-contained breathing apparatus and protective suit. When intervention in close proximity wear acid resistant over suit.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Prevent further leakage or spillage if safe to do so. Ensure adequate ventilation. Material can create slippery conditions. Sweep up to prevent slipping hazard.
Should not be released into the environment.
Sweep up to prevent slipping hazard.
Materials: Dry sand, Earth
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Ensure adequate ventilation. Use personal protective equipment. Keep away from heat and sources of ignition. To avoid thermal decomposition, do not overheat. Take measures to prevent the build up of electrostatic charge. Clean and dry piping circuits and equipment before any operations. Ensure all equipment is electrically grounded before beginning transfer operations.
Keep away from heat and sources of ignition. Keep in properly labelled containers.
Keep away from heat and sources of ignition. Take measures to prevent the build up of electrostatic charge. Ensure all equipment is electrically grounded before beginning transfer operations.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide local ventilation appropriate to the product decomposition risk (see section 10). Apply technical measures to comply with the occupational exposure limits.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under recommended storage conditions.
Avoid to use in presence of high voltage electric arc and in absence of oxygen. Keep away from flames. To avoid thermal decomposition, do not overheat.
Lewis acids (Friedel-Crafts) above 100°C; Aluminum and magnesium in powder form above 200°C; Metals promote and lower decomposition temperature
Gaseous hydrogen fluoride (HF), Fluorophosgene. The release of other hazardous decomposition products is possible.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for FOMBLIN® Y LVAC?
The signal word is no signal word.
What is the physical form of FOMBLIN® Y LVAC?
FOMBLIN® Y LVAC is a liquid appearing as liquid with colourless color. It has odourless odor.
What is the solubility of FOMBLIN® Y LVAC?
Water: insoluble; fluorinated solvents: soluble
What is FOMBLIN® Y LVAC used for?
- Electronic industry - Electrical industry - Chemical industry - For industrial use only.
What is the melting point of FOMBLIN® Y LVAC?
The melting point is Remarks: Not applicable and the boiling point is > 270 °C (518 °F).