FOMBLIN® Y LVAC 25/6

Move to fresh air in case of accidental inhalation of fumes from overheating or combustion. Oxygen or artificial respiration if needed.

Symptoms: No known effect.

Wash off with soap and water.

Symptoms: Redness

Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. If eye irritation persists, consult a specialist.

Symptoms: Contact with eyes may cause irritation. Redness

Drink 1 or 2 glasses of water. Do NOT induce vomiting. If symptoms persist, call a physician.

Symptoms: Nausea, Vomiting, Diarrhoea

Water, powder, Foam, Dry chemical, Carbon dioxide (CO2)

The product is not flammable. Not explosive. In case of fire hazardous decomposition products may be produced such as: Gaseous hydrogen fluoride (HF), Fluorophosgene

Keep containers and surroundings cool with water spray. Keep product and empty container away from heat and sources of ignition.

Prevent further leakage or spillage if safe to do so. Ensure adequate ventilation. Material can create slippery conditions. Sweep up to prevent slipping hazard. Keep away from open flames, hot surfaces and sources of ignition.

Should not be released into the environment.

Soak up with inert absorbent material. Shovel into suitable container for disposal.

Materials: Dry sand, Earth

Ensure adequate ventilation. Use personal protective equipment. Keep away from heat and sources of ignition. To avoid thermal decomposition, do not overheat. Take measures to prevent the build up of electrostatic charge. Clean and dry piping circuits and equipment before any operations. Ensure all equipment is electrically grounded before beginning transfer operations.

Keep away from heat and sources of ignition. Keep in properly labelled containers. Keep away from combustible material. Keep away from incompatible products. Provide tight electrical equipment well protected against corrosion.

Ensure that eyewash stations and safety showers are close to the workstation location. When using do not eat, drink or smoke. Wash hands before breaks and at the end of workday. Handle in accordance with good industrial hygiene and safety practice.

Keep away from heat and sources of ignition.

Provide local ventilation appropriate to the product decomposition risk (see section 10). Refer to protective measures listed in sections 7 and 8. Apply technical measures to comply with the occupational exposure limits.

Protective gloves complying with EN 374. Suitable material: Nitrile rubber, PVC, Neoprene gloves, butyl-rubber. Wear protective gloves. Take note of the information given by the producer concerning permeability and break through times, and of special workplace conditions (mechanical strain, duration of contact).

Safety goggles. Use eye protection according to EN 166.

In case of decomposition (see section 10), use an air breathing apparatus with face mask. Self-contained open-circuit compressed air breathing apparatus (EN 137). Self-contained closed-circuit breathing apparatus compressed (EN 145).

Wear work overall and safety shoes.

Dispose of rinse water in accordance with local and national regulations.

Stable under recommended storage conditions. Metals promote and lower decomposition temperature

No dangerous reaction known under conditions of normal use.

No dangerous reaction known under conditions of normal use.

Avoid to use in presence of high voltage electric arc and in absence of oxygen. Keep away from flames. To avoid thermal decomposition, do not overheat.

Alkali metals, Lewis acids (Friedel-Crafts) above 100°C, Aluminum and magnesium in powder form above 200°C

Gaseous hydrogen fluoride (HF). Fluorophosgene