NextSDS Logo
Ef

Effektmasse Nr. 8, kork

NO SIGNAL WORD solid (bulk, lumps, pellets, granulate or powder) SDS/MSDS

Chemical Product Identification & Regulatory Data

Official chemical identifiers, CAS numbers, and regulatory compliance information

Basic Product Information

Product Name
Effektmasse Nr. 8, kork
Chemical Name
calciumboraat
Synonyms
Hywite Superb Powder

Regulatory Identifiers

CAS Number

Chemical Abstracts Service registry number - unique identifier for chemical substances

EC Number

European Community number - used for regulatory compliance in EU/EEA

Uses Information

Identified Uses
Ceramics (sanitaryware, floor tiles, wall tiles, roof tiles, tiles; porcelain, tableware, refractories, etc.) Enamels Glass Fillers Deposit sealing Paint Plastic & Rubber Adhesives and Sealant Building material & Cement Fertilisers & Agricultural products
Uses Advised Against
There is no use advised against.

Overview

Effektmasse Nr. 8, kork (CAS: 999999-99-4 ) commonly used ceramics (sanitaryware, floor tiles, wall tiles, roof tiles, tiles; porcelain, tableware, refractories, etc.) enamels glass fillers deposit sealing paint plastic & rubber adhesives and sealant building material & cement fertilisers & agricultural products.

Manage Your Safety Data Sheets

Organize and access your chemical safety data with ease.

GHS Hazard Classification & Safety Warnings

Globally Harmonized System (GHS) hazard pictograms, signal words, and safety classifications

Classification Status

Classified

Signal Word

no signal word

Hazard Classifications

Not Classified

GHS Hazard Pictograms & Safety Symbols

GHS (Globally Harmonized System) pictograms indicate specific chemical hazard categories and safety precautions

Hazard Statements

Precautionary Statements

Chemical Manufacturers & Supply Chain

Authorized suppliers, manufacturers, and distribution network information

Arno Witgert, Inh. Dipl.-Ing. (FH) Michael Liebig e. K.

undefined

๐Ÿ“

Arno-Witgert-Str. 1, 56414 Herschbach/OT Wahnsc Germany

๐ŸŒ

DE

๐Ÿ“ 

0049 (0)6435/9223-33

24/7 Emergency Response & Poison Control

Critical emergency contact numbers for chemical spills, exposure incidents, and medical emergencies

Emergency Contact

๐Ÿ“ž

112

Arno Witgert, Inh. Dipl.-Ing. (FH) Michael Liebig e. K.

๐Ÿ“ž

0049 (0)6435/9223-0

๐ŸŒ

DE

๐Ÿ•’

Available outside office hours: Yes

๐Ÿ—ฃ๏ธ

Languages: DE, EN

Chemical Composition & Hazardous Ingredients

Detailed component analysis, concentration ranges, and hazardous substance identification

Product Type

uvcb

General Composition

Kaolinitic clay is a UVCB substance sub-type 4. The purity of the product is 100 % w/w.

Chemical Components & Hazardous Substances

Chemical Name CAS Number Concentration Hazardous
Kaolinitic clay N/A 100% โœ“ Non-hazardous
quartz-fine fraction
EC: 238-878-4
14808-60-7 1% โš ๏ธ Hazardous

Composition Notes

No M Factor assigned. No SCL assigned

Emergency First Aid Measures

Critical first aid procedures for chemical exposure incidents and medical emergencies

๐Ÿซ Inhalation Exposure

Movement of the exposed individual from the area to fresh air is recommended.

๐Ÿ‘๏ธ Eye Contact

Rinse under water for at least one minute and seek medical attention if irritation persists.

Related Chemical Substances & Alternative Products

Similar chemicals with comparable safety profiles and industrial applications

Technical Specifications & Material Properties

Physical state, chemical properties, melting point, boiling point, and material characteristics

๐Ÿ“Š Form
bulk, lumps, pellets, granulate or powder
๐Ÿ“Š Solubility In Fat
Not available
๐Ÿ“Š Crystallisation Point
Not available
๐Ÿ’จ Evaporation Rate
not applicable (solid with a melting point > 450 ยฐC)
๐Ÿ“Š Decomposition Temperature
not applicable (solid with a melting point > 450 ยฐC)
๐Ÿ’จ Boiling Point
not applicable (solid with a melting point > 450 ยฐC)
Critical Property
๐Ÿ“Š Relative Density
2.6 g/cmยณ
๐Ÿ“Š Metal Corrosion
Not available
๐Ÿ“Š Cloud Point
Not available
๐Ÿ”ฅ Flammability
non flammable (study result, EU A.10 method)
๐Ÿ“Š Colour Intensity
Not available
๐ŸงŠ Melting Point
> 450 ยฐC
Critical Property
๐Ÿ“Š Voc Content
Not available
๐Ÿ“Š Bulk Density
Not available
๐Ÿ“Š Auto Ignition Temperature
do not apply to solids
๐Ÿ’จ Vapor Pressure
not applicable (solid with a melting point > 450 ยฐC)
๐Ÿ“Š Molecular Weight
Not available
๐Ÿ“Š Physical State Data
solid
๐Ÿ“Š Relative Evaporation Rate
Not available
๐Ÿ“Š Lower Explosive Limit
do not apply to solids
๐Ÿงช Physical State
solid (bulk, lumps, pellets, granulate or powder)
Critical Property
๐Ÿ“Š Solidification Point
Not available
๐Ÿ“Š Solubility In Water
<1 mg/L at 20ยฐC (study results, EU A.6 method)
๐Ÿ“Š Upper Explosive Limit
do not apply to solids
๐Ÿ“Š Dynamic Viscosity
Not available
๐Ÿ“Š Softening Point
Not available
๐Ÿ“Š State Under Standard Conditions
Not available
๐Ÿ“Š Explosive Limits
Not available
๐Ÿ“Š Partition Coefficient
not applicable (inorganic substance)
๐Ÿ”ฅ Flash Point
not applicable (solid with a melting point > 450 ยฐC)
Critical Property
๐Ÿ’ง Solubility
Not available
๐Ÿ“Š Odor Threshold
Not available
๐Ÿ“Š Properties Status
Not available
โš–๏ธ Density
Not available
๐Ÿ“Š Freezing Point
Not available
๐Ÿ‘ƒ Odor
odourless
๐Ÿ“Š Kinematic Viscosity
do not apply to solids (solid with a melting point > 450 ยฐC)
๐Ÿ“Š Vapor Density
not applicable (solid with a melting point > 450 ยฐC)
๐Ÿงช Ph
3-7
๐ŸŽจ Colour
ochre-yellow
๐Ÿ‘๏ธ Appearance
Not available

Exposure Controls & Personal Protective Equipment (PPE)

Occupational exposure limits, engineering controls, and required safety equipment

๐Ÿญ Engineering Controls

Minimise airborne dust generation. Use process enclosures, local exhaust ventilation or other engineering controls to keep airborne levels below specified exposure limits. If user operations generate dust, fumes or mist, use ventilation to keep exposure to airborne particles below the exposure limit. Apply organisational measures e.g. by isolating personnel from dusty areas.

๐Ÿงค Hand Protection

For hands, appropriate protection (e.g. PVC, neoprene or natural rubber gloves) is recommended for workers who suffer from dermatitis or sensitive skin. Wash hands at the end of each work session.

๐Ÿ‘๏ธ Eye Protection

Wear safety glasses with side-shields, or tight-fitting full-vision goggles in circumstances where there is a risk of penetrative eye injuries. Do not wear contact lenses.

๐Ÿ˜ท Respiratory Protection

Local ventilation to control airborne dust levels below occupational exposure limits is recommended. In case of prolonged exposure to airborne dust concentrations wear a respiratory protective equipment that complies with the requirements of European and national legislation. The use of a suitable particle filter mask type FFP1, FFP2 or FFP3 is recommended. See EN 143: 2000 (Respiratory Protective devices โ€“ Particle filters) and EN149: 2001 (Respiratory protective devices - Filtering half masks to protect against particles).

๐Ÿฆบ Skin/Body Protection

For skin, normal work clothes are appropriate.

๐ŸŒ Environmental Exposure Controls

All ventilation systems should be filtered before discharge to atmosphere. Avoid wind dispersal. Contain the spillage.

Chemical Stability & Reactivity Data

Chemical stability, hazardous reactions, and incompatible materials information

โœ… Chemical Stability

Kaolinitic clay is chemically stable.

โš—๏ธ Reactivity

Inert, not reactive.

โš ๏ธ Hazardous Reactions

No hazardous reaction.

๐Ÿšซ Conditions to Avoid

None.

๐Ÿงช Incompatible Materials

None.

๐Ÿ’จ Hazardous Decomposition Products

None.

Transportation & Shipping Information

UN numbers, shipping names, transport classes, and regulatory transport requirements

๐Ÿ“‹ Packing Group

Not applicable.

Chemical Safety FAQ & Common Questions

Most frequently asked questions about safety, handling, storage, and regulatory compliance

What other names is Effektmasse Nr. 8, kork known by?

Effektmasse Nr. 8, kork is also known as: Hywite Superb Powder

What is the hazard signal word for Effektmasse Nr. 8, kork?

The signal word for this substance is "no signal word".

What is the physical form of Effektmasse Nr. 8, kork?

Effektmasse Nr. 8, kork is a solid (bulk, lumps, pellets, granulate or powder) with ochre-yellow color. It has odourless odor.

What is Effektmasse Nr. 8, kork used for?

Ceramics (sanitaryware, floor tiles, wall tiles, roof tiles, tiles; porcelain, tableware, refractories, etc.) Enamels Glass Fillers Deposit sealing Paint Plastic & Rubber Adhesives and Sealant Building material & Cement Fertilisers & Agricultural products

What is the melting point of Effektmasse Nr. 8, kork?

The melting point is > 450 ยฐC and the boiling point is not applicable (solid with a melting point > 450 ยฐC).