NextSDS Logo
Safety Data Sheet EN

Steinzeug-Dreh- und Stanzmasse Nr. 9 sf 0-0,2, extra schwarz, feinst schamottiert; Steinzeug-Dreh- und Stanzmasse Nr. 9 sf, extra schwarz, fein schamottiert; Steinzeug-Aufbau- und Kachelmasse Nr. 9 sf 40, extra schwarz, stark fein schamottiert; Steinzeug-Aufbaumasse Nr. 9 s, extra schwarz, schamottiert; Steinzeug-Aufbaumasse Nr. 9 sg, extra schwarz, grob schamottiert; Steinzeug-Aufbau- und Kachelmasse Nr. 9 sg 40, extra schwarz, stark grob schamottiert;

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Steinzeug-Dreh- und Stanzmasse Nr. 9 sf 0-0,2, extra schwarz, feinst schamottiert; Steinzeug-Dreh- und Stanzmasse Nr. 9 sf, extra schwarz, fein schamottiert; Steinzeug-Aufbau- und Kachelmasse Nr. 9 sf 40, extra schwarz, stark fein schamottiert; Steinzeug-Aufbaumasse Nr. 9 s, extra schwarz, schamottiert; Steinzeug-Aufbaumasse Nr. 9 sg, extra schwarz, grob schamottiert; Steinzeug-Aufbau- und Kachelmasse Nr. 9 sg 40, extra schwarz, stark grob schamottiert;
Chemical Name
Ceramic bodies
Synonyms
Ceramic compound, Preparation, Kaolinitic clays, Plastic Clays, Ball Clays, Fine Clays

Regulatory Identifiers

CAS Number
N/A
REACH No.
Exempted in accordance with Annex V.7

Identified Uses

Ceramics (sanitaryware, floor tiles, wall tiles, roof tiles, tiles; porcelain, tableware, refractories, etc.), Enamels, Glass, Fillers, Deposit sealing, Paint, Plastic & Rubber, Adhesives and Sealant, Building material & Cement, Fertilisers & Agricultural products

Manufacturers & Suppliers

A

Arno Witgert, Inh. Dipl.-Ing. (FH) Michael Liebig e. K.

manufacturer

OT Wahnscheid, 56414 Herschbach, Germany

0049 (0)6435/9223-0

Emergency Contacts

Emergency Contact

0049 (0)6435/9223-0

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

Hazard Classifications

Not Classified

GHS Pictograms

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type substance

Kaolinitic clay Amount: 100% EINECS: 310-127-6 CAS: 999999-99-4

Chemical Name CAS Number Concentration Hazardous
Kaolinitic clay EC: 310-127-6 999999-99-4 100% No

Notes

May contain mineral or chemical additives.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Movement of the exposed individual from the area to fresh air is recommended.

Skin contact

No special first aid measures necessary.

Eye contact

Rinse with copious quantities of water and seek medical attention if irritation persists.

Ingestion

No first-aid measure required.

Immediate Medical Attention

No specific actions are required.

Medical Treatment

No specific actions are required.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

No specific extinguishing media is needed.

Specific hazards

Non combustible.

Firefighter Protection

No specific fire-fighting protection is required.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Environmental

No special requirements.

Cleanup methods

Avoid dry sweeping and use water spraying or vacuum cleaning systems

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

In case of insufficient ventilation, wear suitable respiratory protective equipment. Handle packaged products carefully to prevent accidental bursting.

Storage

Keep containers closed and store packaged products so as to prevent accidental bursting.

Hygiene

Do not to eat, drink and smoke in work areas; wash hands after use; remove contaminated clothing and protective equipment before entering eating areas.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Minimise airborne dust generation. Use process enclosures, local exhaust ventilation or other engineering controls to keep airborne levels below specified exposure limits. If user operations generate dust, fumes or mist, use ventilation to keep exposure to airborne particles below the exposure limit. Apply organisational measures, e.g. by isolating personnel from dusty areas.

Hands

Appropriate protection (e.g. gloves, barrier cream) is recommended for workers who suffer from dermatitis or sensitive skin. Wash hands at the end of each work session.

Eyes

Wear safety glasses with side-shields in circumstances where there is a risk of penetrative eye injuries.

Respiratory

In case of prolonged exposure to airborne dust concentrations, wear a respiratory protective equipment that complies with the requirements of European or national legislation.

Skin/Body

No specific requirement. For hands, see below. Appropriate protection (e.g. protective clothing, barrier cream) is recommended for workers who suffer from dermatitis or sensitive skin.

Environmental

Avoid wind dispersal.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Density
---
Appearance
solid (bulk, lumps, pellets, granulate or powder)
Ph
3 -- 7
Kinematic Viscosity
---
Decomposition Temperature
---
Bulk Density
---
Evaporation Rate
---
Odor Threshold
Not relevant
Auto Ignition Temperature
---
Voc Content
---
Boiling Point
---
Solubility In Fat
---
Cloud Point
---
Freezing Point
---
Solubility
Solubility in hydrofluoric acid: Yes
Relative Density
0.7 - 2.6 g/cm³
Lower Explosive Limit
---
Vapor Density
---
Solubility In Water
negligible
Upper Explosive Limit
---
Partition Coefficient
---
Properties Status
---
State Under Standard Conditions
---
Colour
brown
Vapor Pressure
---
Molecular Weight
---
Physical State
solid
Melting Point
Not available
Form
---
Crystallisation Point
---
Odor
odourless
Physical State Data
solid
Colour Intensity
---
Relative Evaporation Rate
---
Flash Point
---
Dynamic Viscosity
---
Flammability
---
Softening Point
---
Explosive Limits
---
Metal Corrosion
---
Solidification Point
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Chemically stable.

Reactivity

Inert, not reactive.

Hazardous reactions

No hazardous reactions.

Avoid

Not relevant

Incompatible

No particular incompatibility.

Decomposition

Not relevant

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What other names is Steinzeug-Dreh- und Stanzmasse Nr. 9 sf 0-0,2, extra schwarz, feinst schamottiert; Steinzeug-Dreh- und Stanzmasse Nr. 9 sf, extra schwarz, fein schamottiert; Steinzeug-Aufbau- und Kachelmasse Nr. 9 sf 40, extra schwarz, stark fein schamottiert; Steinzeug-Aufbaumasse Nr. 9 s, extra schwarz, schamottiert; Steinzeug-Aufbaumasse Nr. 9 sg, extra schwarz, grob schamottiert; Steinzeug-Aufbau- und Kachelmasse Nr. 9 sg 40, extra schwarz, stark grob schamottiert; known by?

Steinzeug-Dreh- und Stanzmasse Nr. 9 sf 0-0,2, extra schwarz, feinst schamottiert; Steinzeug-Dreh- und Stanzmasse Nr. 9 sf, extra schwarz, fein schamottiert; Steinzeug-Aufbau- und Kachelmasse Nr. 9 sf 40, extra schwarz, stark fein schamottiert; Steinzeug-Aufbaumasse Nr. 9 s, extra schwarz, schamottiert; Steinzeug-Aufbaumasse Nr. 9 sg, extra schwarz, grob schamottiert; Steinzeug-Aufbau- und Kachelmasse Nr. 9 sg 40, extra schwarz, stark grob schamottiert; is also known as: Ceramic compound, Preparation, Kaolinitic clays, Plastic Clays, Ball Clays, Fine Clays

What is the hazard signal word for Steinzeug-Dreh- und Stanzmasse Nr. 9 sf 0-0,2, extra schwarz, feinst schamottiert; Steinzeug-Dreh- und Stanzmasse Nr. 9 sf, extra schwarz, fein schamottiert; Steinzeug-Aufbau- und Kachelmasse Nr. 9 sf 40, extra schwarz, stark fein schamottiert; Steinzeug-Aufbaumasse Nr. 9 s, extra schwarz, schamottiert; Steinzeug-Aufbaumasse Nr. 9 sg, extra schwarz, grob schamottiert; Steinzeug-Aufbau- und Kachelmasse Nr. 9 sg 40, extra schwarz, stark grob schamottiert;?

The signal word is no signal word.

What is the physical form of Steinzeug-Dreh- und Stanzmasse Nr. 9 sf 0-0,2, extra schwarz, feinst schamottiert; Steinzeug-Dreh- und Stanzmasse Nr. 9 sf, extra schwarz, fein schamottiert; Steinzeug-Aufbau- und Kachelmasse Nr. 9 sf 40, extra schwarz, stark fein schamottiert; Steinzeug-Aufbaumasse Nr. 9 s, extra schwarz, schamottiert; Steinzeug-Aufbaumasse Nr. 9 sg, extra schwarz, grob schamottiert; Steinzeug-Aufbau- und Kachelmasse Nr. 9 sg 40, extra schwarz, stark grob schamottiert;?

Steinzeug-Dreh- und Stanzmasse Nr. 9 sf 0-0,2, extra schwarz, feinst schamottiert; Steinzeug-Dreh- und Stanzmasse Nr. 9 sf, extra schwarz, fein schamottiert; Steinzeug-Aufbau- und Kachelmasse Nr. 9 sf 40, extra schwarz, stark fein schamottiert; Steinzeug-Aufbaumasse Nr. 9 s, extra schwarz, schamottiert; Steinzeug-Aufbaumasse Nr. 9 sg, extra schwarz, grob schamottiert; Steinzeug-Aufbau- und Kachelmasse Nr. 9 sg 40, extra schwarz, stark grob schamottiert; is a solid appearing as solid (bulk, lumps, pellets, granulate or powder) with brown color. It has odourless odor.

What is the solubility of Steinzeug-Dreh- und Stanzmasse Nr. 9 sf 0-0,2, extra schwarz, feinst schamottiert; Steinzeug-Dreh- und Stanzmasse Nr. 9 sf, extra schwarz, fein schamottiert; Steinzeug-Aufbau- und Kachelmasse Nr. 9 sf 40, extra schwarz, stark fein schamottiert; Steinzeug-Aufbaumasse Nr. 9 s, extra schwarz, schamottiert; Steinzeug-Aufbaumasse Nr. 9 sg, extra schwarz, grob schamottiert; Steinzeug-Aufbau- und Kachelmasse Nr. 9 sg 40, extra schwarz, stark grob schamottiert;?

Solubility in hydrofluoric acid: Yes

What is Steinzeug-Dreh- und Stanzmasse Nr. 9 sf 0-0,2, extra schwarz, feinst schamottiert; Steinzeug-Dreh- und Stanzmasse Nr. 9 sf, extra schwarz, fein schamottiert; Steinzeug-Aufbau- und Kachelmasse Nr. 9 sf 40, extra schwarz, stark fein schamottiert; Steinzeug-Aufbaumasse Nr. 9 s, extra schwarz, schamottiert; Steinzeug-Aufbaumasse Nr. 9 sg, extra schwarz, grob schamottiert; Steinzeug-Aufbau- und Kachelmasse Nr. 9 sg 40, extra schwarz, stark grob schamottiert; used for?

Ceramics (sanitaryware, floor tiles, wall tiles, roof tiles, tiles; porcelain, tableware, refractories, etc.), Enamels, Glass, Fillers, Deposit sealing, Paint, Plastic & Rubber, Adhesives and Sealant, Building material & Cement, Fertilisers & Agricultural products

What is the melting point of Steinzeug-Dreh- und Stanzmasse Nr. 9 sf 0-0,2, extra schwarz, feinst schamottiert; Steinzeug-Dreh- und Stanzmasse Nr. 9 sf, extra schwarz, fein schamottiert; Steinzeug-Aufbau- und Kachelmasse Nr. 9 sf 40, extra schwarz, stark fein schamottiert; Steinzeug-Aufbaumasse Nr. 9 s, extra schwarz, schamottiert; Steinzeug-Aufbaumasse Nr. 9 sg, extra schwarz, grob schamottiert; Steinzeug-Aufbau- und Kachelmasse Nr. 9 sg 40, extra schwarz, stark grob schamottiert;?

The melting point is Not available .