NextSDS Logo
Safety Data Sheet EN

Steinzeug-Gießmasse Nr. 11, weiß, anwendungsfertig

CAS 999999-99-4
EC 310-127-6

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Steinzeug-Gießmasse Nr. 11, weiß, anwendungsfertig
Chemical Name
Hydrous aluminium silicate
Synonyms
plastic clay, ball clay, fine clay

Regulatory Identifiers

CAS Number
999999-99-4 Check regulations →
EC Number
310-127-6 Check regulations →
REACH No.
Exempted in accordance with Annex V.7 of Regulation (EC) 1907/2006

Identified Uses

Ceramics (sanitaryware, floor tiles, wall tiles, roof tiles, tiles; porcelain, tableware, refractories, etc.) - Enamels - Glass - Fillers - Deposit sealing - Paint - Plastic & Rubber - Adhesives and Sealant - Building material & Cement - Fertilisers & Agricultural products

Uses advised against

There is no use advised against.

Manufacturers & Suppliers

A

Arno Witgert, Inh. Dipl.-Ing. (FH) Michael Liebig e. K.

manufacturer

Arno-Witgert-Str. 1, 56414 Herschbach/OT Wahnscheid, Germany

0049 (0)6435/9223-0

Emergency Contacts

European Emergency N°

112

company

0049 (0)6435/9223-0

No

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

Hazard Classifications

Not Classified

GHS Pictograms

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type uvcb

Kaolinitic clay is a UVCB substance sub-type 4.

Chemical Name CAS Number Concentration Hazardous
Kaolinitic clay --- --- No
quartz-fine fraction EC: 238-878-4 14808-60-7 1% Yes

Notes

The purity of the product is 100 % w/w. No M Factor assigned. No SCL assigned

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Movement of the exposed individual from the area to fresh air is recommended.

Skin contact

No special first aid measures necessary.

Eye contact

Rinse under water for at least one minute

Ingestion

No first aid measure required.

Immediate Medical Attention

seek medical attention if irritation persists.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

No specific extinguishing media is needed.

Unsuitable media

No restriction on the extinguishing media to be used.

Specific hazards

None. The material is not flammable and it does not lead to hazardous thermal decomposition products.

Firefighter Protection

No specific fire-fighting protection is required.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Ensure adequate ventilation. Keep dust levels to a minimum. Keep unprotected persons away. Avoid contact with skin, eyes, and personal clothing. Avoid inhalation of dust. Take care of wet product on floor, which presents a slip hazard.

Environmental

No special environmental measures are necessary.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Keep dust levels to a minimum. Minimize dust generation. Handle packaged products carefully to prevent accidental bursting.

Storage

Keep containers closed and store packaged products so as to prevent accidental bursting.

Hygiene

Good personal and housekeeping practices (i.e. regular cleaning with suitable cleaning devices), no drinking, eating and smoking in the work areas. Remove contaminated clothing and protective equipment before entering eating areas. Shower and change clothes at end of work shift. Do not wear contaminated clothing at home.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Minimise airborne dust generation. Use process enclosures, local exhaust ventilation or other engineering controls to keep airborne levels below specified exposure limits. If user operations generate dust, fumes or mist, use ventilation to keep exposure to airborne particles below the exposure limit. Apply organisational measures e.g. by isolating personnel from dusty areas.

Hands

For hands, appropriate protection (e.g. PVC, neoprene or natural rubber gloves) is recommended for workers who suffer from dermatitis or sensitive skin.

Eyes

Wear safety glasses with side-shields, or tight-fitting full-vision goggles in circumstances where there is a risk of penetrative eye injuries. Do not wear contact lenses.

Respiratory

Local ventilation to control airborne dust levels below occupational exposure limits is recommended. In case of prolonged exposure to airborne dust concentrations wear a respiratory protective equipment that complies with the requirements of European and national legislation. The use of a suitable particle filter mask type FFP1, FFP2 or FFP3 is recommended. See EN 143: 2000 (Respiratory Protective devices – Particle filters) and EN149: 2001 (Respiratory protective devices - Filtering half masks to protect against particles).

Skin/Body

For skin, normal work clothes are appropriate.

Environmental

All ventilation systems should be filtered before discharge to atmosphere. Avoid wind dispersal. Contain the spillage.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Relative Density
2.6 g/cm³
Ph
3-7
Decomposition Temperature
not applicable (solid with a melting point > 450 °C)
Bulk Density
---
Relative Evaporation Rate
---
Colour
grey-white
Form
---
Colour Intensity
---
Physical State
liquid (as aqueous suspension)
Vapor Density
not applicable (solid with a melting point > 450 °C)
Crystallisation Point
---
Auto Ignition Temperature
do not apply to solids
Explosive Limits
---
Boiling Point
not applicable (solid with a melting point > 450 °C)
Odor Threshold
---
Melting Point
> 450 °C (study result, EU A.1 method)
Evaporation Rate
not applicable (solid with a melting point > 450 °C)
Softening Point
---
Odor
odourless
Density
---
Dynamic Viscosity
---
Metal Corrosion
---
Lower Explosive Limit
do not apply to solids
Physical State Data
solid
Flammability
non flammable (study result, EU A.10 method)
Voc Content
---
Kinematic Viscosity
do not apply to solids (solid with a melting point > 450 °C)
Vapor Pressure
not applicable (solid with a melting point > 450 °C)
Appearance
---
Solubility In Fat
---
Solidification Point
---
Molecular Weight
---
Upper Explosive Limit
do not apply to solids
Solubility
---
Cloud Point
---
State Under Standard Conditions
---
Partition Coefficient
not applicable (inorganic substance)
Solubility In Water
<1 mg/L at 20°C (study results, EU A.6 method)
Properties Status
---
Flash Point
not applicable (solid with a melting point > 450 °C)
Freezing Point
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Kaolinitic clay is chemically stable.

Reactivity

Inert, not reactive.

Hazardous reactions

No hazardous reaction.

Avoid

None.

Incompatible

None.

Decomposition

None.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

12.1 Toxicity:

### 12.1 Toxicity: #### 12.1.1 Acute/Prolonged toxicity to fish LC₅₀ (96h) for freshwater fish (rainbow trout Oncorhynchus mykiss): >1000 mg/L (Method OECD 203) #### 12.1.2 Acute/Prolonged toxicity to aquatic invertebrates EC₅₀ (48h) for aquatic invertebrates (Daphnia magna): >1000 mg/L (Method OECD 202) #### 12.1.3 Acute/Prolonged toxicity to aquatic plants EC₅₀ (72h) for freshwater algae (Raphidocelis Subcapitata): > 1000 mg/L (Method OECD 201) #### 12.1.4 Toxicity to micro-organisms e.g. bacteria No data available #### 12.1.5 Chronic toxicity to aquatic organisms No data available #### 12.1.6 Toxicity to soil dwelling organisms No data available #### 12.1.7 Toxicity to terrestrial plants No data available #### 12.1.8 General effect No specific adverse effects known.

12.2 Persistence and degradability

Abiotic Degradation: The substance is inorganic and therefore will not undergo abiotic degradation. Biodegradation: The substance is inorganic and therefore will not undergo biodegradation.

12.3 Bioaccumulative potential

Not relevant for inorganic substances. Bioaccumulation is not expected.

Bioaccumulation is not expected as the substance is inorganic.

12.4 Mobility in soil

Kaolinitic clay is almost insoluble and thus presents a low mobility in most soils.

Kaolinitic clay is almost insoluble and thus presents a low mobility in most soils.

12.5 Results of PBT and vPvB assessment:

This substance does not meet the criteria for classification as PBT or vPvB.

The substance does not meet the criteria for classification as PBT or vPvB.

12.6 Endocrine disrupting properties

Available data for the substance have been considered against the criteria laid down in Regulations ((EC) No 1907/2006, (EU) 2017/2100, (EU) 2018/605) and found not to apply.

The substance does not meet the criteria for endocrine disrupting properties based on the evaluated regulations.

12.7 Other adverse effects:

According to the criteria of the European classification and labelling system, the substance does not require classification as hazardous for the environment.

The substance does not require classification as hazardous for the environment according to European criteria.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

Wastes should be handled in accordance with local and national regulations.

Disposal

Dispose of waste in such a way to avoid dust generation. Where possible, recycling should be preferred to disposal.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
Not relevant
Shipping Name
Not relevant
Transport Class
Not classified
Packing Group
Not applicable
ADR

Avoid any release of dust during transportation, by using air-tight tanks for powders and covered trucks for pebbles.

IMDG

Avoid any release of dust during transportation, by using air-tight tanks for powders and covered trucks for pebbles.

IATA

Avoid any release of dust during transportation, by using air-tight tanks for powders and covered trucks for pebbles.

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

None.

Chemical Safety Assessment Not performed
?

Frequently Asked Questions

Common questions about safety, handling, and properties

What other names is Steinzeug-Gießmasse Nr. 11, weiß, anwendungsfertig known by?

Steinzeug-Gießmasse Nr. 11, weiß, anwendungsfertig is also known as: plastic clay, ball clay, fine clay

What is the hazard signal word for Steinzeug-Gießmasse Nr. 11, weiß, anwendungsfertig?

The signal word is no signal word.

What is the physical form of Steinzeug-Gießmasse Nr. 11, weiß, anwendungsfertig?

Steinzeug-Gießmasse Nr. 11, weiß, anwendungsfertig is a liquid (as aqueous suspension) with grey-white color. It has odourless odor.

What is Steinzeug-Gießmasse Nr. 11, weiß, anwendungsfertig used for?

Ceramics (sanitaryware, floor tiles, wall tiles, roof tiles, tiles; porcelain, tableware, refractories, etc.) - Enamels - Glass - Fillers - Deposit sealing - Paint - Plastic & Rubber - Adhesives and Sealant - Building material & Cement - Fertilisers & Agricultural products

What is the melting point of Steinzeug-Gießmasse Nr. 11, weiß, anwendungsfertig?

The melting point is > 450 °C (study result, EU A.1 method) and the boiling point is not applicable (solid with a melting point > 450 °C).