Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Ortec - contact adhesive
- Product Code
- 170
Regulatory Identifiers
- CAS Number
- N/A
Manufacturers & Suppliers
Renia Gesellschaft mbH
national supplier
Ostmerheimer Straße 516, 51109 Köln, Deutschland
+492216307990
www.renia.com
Emergency Contacts
Grimme
+49-221-630799-17
Only available during office hours.
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
GHS09
Hazard Statements
Precautionary Statements
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
polychloroprene adhesive with modified synthetic resins and stabilizers in a mixture of organic solvents.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Ethyl acetate EC: 205-500-4 | 141-78-6 | 30 - 35% | Yes |
| Hydrocarbons, C6-C7, isoalkanes, cyclics, <5% n-hexane EC: 921-024-6 | --- | 22 - 25% | Yes |
| cyclohexane EC: 203-806-2 | 110-82-7 | 22 - 25% | Yes |
| rosin colophony EC: 232-475-7 | 8050-09-7 | 0.7 - 1% | Yes |
| 2,6-di-tert-butyl-p-cresol EC: 204-881-4 | 128-37-0 | 0.1 - 0.4% | Yes |
Full text of H- and EUH-statements: see section 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
Provide fresh air. If breathing is irregular or stopped, administer artificial respiration. In case of inhalation of decomposition products, affected person should be moved into fresh air and kept still.
Take off contaminated clothing and wash it before reuse. After contact with skin, wash immediately with plenty of water and soap. Rub greasy ointment into the skin.
In case of contact with eyes flush immediately with plenty of flowing water for 10 to 15 minutes holding eyelids apart and consult an ophthalmologist.
Rinse mouth immediately and drink plenty of water. Do NOT induce vomiting.
Symptoms: allergic symptoms, especially in the breathing area
Immediate Medical Attention
Medical treatment necessary. Consult an ophthalmologist. In case of allergic symptoms, especially in the breathing area, seek medical advice immediately.
Medical Treatment
Treat symptomatically. Transport affected person in lying position, in case of shortness of breath in half-sitting position. Where appropriate artificial ventilation.
Related Substances
Similar chemicals with comparable safety profiles
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
If handled uncovered, arrangements with local exhaust ventilation should be used if possible.
Suitable material: NBR (Nitrile rubber). Thickness of the glove material: ≥ 0.4 mm. Breakthrough time (maximum wearing time): ≥ 480 min. For special purposes, it is recommended to check the resistance to chemicals of the protective gloves mentioned above together with the supplier of these gloves.
Wear closely fitting protective glasses in case of splashes.
If technical exhaust or ventilation measures are not possible or insufficient, respiratory protection must be worn. Combination filtering device (EN 14387) Use the following filter types for cleaning waste gases:
When handling with chemical substances, protective clothing with CE-labels including the four control digits must be worn.
Do not allow to enter into soil/subsoil. Do not allow to enter into surface water or drains. In case of gas escape or of entry into waterways, soil or drains, inform the responsible authorities.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable when applying the recommended regulations for storage and handling.
The study does not need to be conducted because the substance is known to be stable at room temperature for prolonged periods of time (days).
Gases / vapours, highly flammable. Vapours can form explosive mixtures with air.
Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
Acid, concentrated, Oxidising agent, strong.
Thermal decomposition can lead to the escape of irritating gases and vapours.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1133
- Transport Class
- 3
- Packing Group
- II
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Ortec - contact adhesive?
The signal word is danger.
What is the physical form of Ortec - contact adhesive?
Ortec - contact adhesive is a liquid with light yellow color. It has characteristic odor.
What are the hazard statements for Ortec - contact adhesive?
This substance has 5 hazard statements:
- H225: Highly flammable liquid and vapour.
- H315: Causes skin irritation.
- H319: Causes serious eye irritation.
- H336: May cause drowsiness or dizziness.
- H411: Toxic to aquatic life with long lasting effects.
What is the melting point of Ortec - contact adhesive?
The melting point is not determined and the boiling point is 65 °C.