Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Pattex Contact Transparent
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Contact adhesive
Manufacturers & Suppliers
Henkel AG & Co. KGaA
manufacturer
Henkelstr. 67, 40589 Düsseldorf, Germany
Emergency Contacts
Henkel information service
+49-(0)211-797-3350
around-the-clock
Information Centers for Cases of Poisoning in Germany
++49 (0) 30 19240
day and night
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
The data for this section has not been processed yet.
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air, consult doctor if complaint persists.
Symptoms: Vapors may cause drowsiness and dizziness.
Rinse with running water and soap. Skin care. Remove contaminated clothes immediately.
Symptoms: Repeated exposure may cause skin dryness or cracking.
Immediately flush eyes with soft jet of water or eye rinse solution for at least 5 minutes. If pains remains (intensive smarting, sensitivity to light, visual disturbance) continue flushing and contact/seek doctor or hospital.
Symptoms: Irritation, conjunctivitis.
Rinse mouth and throat. Drink 1-2 glasses of water. Seek medical advice.
Immediate Medical Attention
If pains remains (intensive smarting, sensitivity to light, visual disturbance) continue flushing and contact/seek doctor or hospital.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
carbon dioxide, foam, powder, water spray jet, fine water spray
High pressure waterjet
Can form explosive gas/air mixtures.
Cool endangered containers with water spray jet.
Firefighter Protection
Wear self-contained breathing apparatus. Wear protective equipment.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Ensure adequate ventilation. Wear protective equipment. Danger of slipping on spilled product.
Do not empty into drains / surface water / ground water.
Remove with liquid-absorbing material
Materials: sand, peat, sawdust
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Ventilate working rooms thoroughly. Avoid naked flames, sparking and sources of ignition. Switch off electrical devices. Do not smoke, do not weld. Do not empty waste into waste water drains.
Keep only in the original container. Close the container carefully after use and store it at a good ventilated place. Store protected from heat influence. Store frost-free. Temperatures between + 5 °C and + 40 °C. Do not store together with food or other consumables.
Do not breathe solvent vapors. Do not eat, drink or smoke while working. Wash hands before work breaks and after finishing work.
Avoid naked flames, sparking and sources of ignition. Switch off electrical devices. Do not smoke, do not weld. Avoid all sources of fire such as stoves and ovens. Avoid all sparks, including those occurring at electrical switches and devices.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Recommended are gloves made from Nitril rubber (Material thickness >0,1 mm, Perforation time < 30s). Gloves should be replaced after each short time contact or contamination. Available at laboratory specialized trade or at pharmacies / chemist's shops.
Goggles which can be tightly sealed.
When processing large amounts. Suitable breathing mask when there is inadequate ventilation. Filter: AX
Suitable protective clothing
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under recommended storage conditions.
Reaction with oxidants.
See section reactivity
None if used for intended purpose.
None if used properly.
None known
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1133
- Shipping Name
- ADHESIVES
- Transport Class
- 3
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the physical form of Pattex Contact Transparent?
Pattex Contact Transparent is a liquid appearing as liquid clear colourless with colourless color. It has typical, of solvent odor.
What is Pattex Contact Transparent used for?
Contact adhesive