Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Molda Faible Expansion
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
SU3 - Industrial uses, SU10 - Formulation, SU22 - Professional uses
Manufacturers & Suppliers
PLACOPLATRE®
manufacturer
12 place de l'Iris.92400.Courbevoie.France.
+33 (0)1 88 54 00 00
http://www.saintgobainformula.com
Emergency Contacts
INRS / ORFILA
+33 (0)1 45 42 59 59
NHS
111
National Poisons Information Centre
(01) 809 3000
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
No substances fulfil the criteria set forth in annexe II section A of the REACH regulation (EC) n° 1907/2006.
First Aid Measures
Emergency procedures for chemical exposure incidents
Watch out for any remaining product between skin and clothing, watches, shoes, etc.
Wash thoroughly with fresh, clean water for 15 minutes holding the eyelids open.
Symptoms: redness, pain or visual impairment
Seek medical attention, showing the label.
Immediate Medical Attention
If there is any redness, pain or visual impairment, consult an ophthalmologist. Seek medical attention, showing the label.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Any means suitable for extinguishing surrounding fire.
None.
None.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Consult the safety measures listed under headings 7 and 8.
Prevent any material from entering drains or waterways.
Retrieve the product by mechanical means (sweeping/vacuuming)
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Always wash hands after handling.
To avoid the exposure to moisture
No smoking, eating or drinking in areas where the mixture is used.
Prevent access by unauthorised personnel.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure that there is adequate ventilation, especially in confined areas.
Wear suitable protective gloves in the event of prolonged or repeated skin contact.
Avoid contact with eyes. Before handling powders or dust emission, wear mask goggles in accordance with standard EN166.
Avoid inhaling dust. Type of FFP mask : Wear a disposable half-mask dust filter in accordance with standard EN149/A1.
Work clothing worn by personnel shall be laundered regularly. After contact with the product, all parts of the body that have been soiled must be washed.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
This mixture is stable under the recommended handling and storage conditions in section 7.
Materials to avoid: No materials known.
No data available.
Avoid : - formation of dusts
No data available.
No data available.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Do not pour into drains or waterways.
Recycle or dispose of waste in compliance with current legislation, via a certified collector or company. Do not contaminate the ground or water with waste, do not dispose of waste into the environment.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Molda Faible Expansion?
The signal word is no signal word.
What is the physical form of Molda Faible Expansion?
Molda Faible Expansion is a powder or dust. with colour varies white. beige. light yellow. grey or reddish tinge or brick red color. It has neutral odor.
What is the solubility of Molda Faible Expansion?
Soluble.
What is Molda Faible Expansion used for?
SU3 - Industrial uses, SU10 - Formulation, SU22 - Professional uses
What is the melting point of Molda Faible Expansion?
The melting point is Not relevant. and the boiling point is Not relevant..