NextSDS Logo
Safety Data Sheet EN

CPS STENCIL REMOVER CONCENTRATE 1:25

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
CPS STENCIL REMOVER CONCENTRATE 1:25
Product Code
3264

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Industrial use: Screen printing

Uses advised against

The product should not be used for any purpose, other than that described above.

Manufacturers & Suppliers

M

MacDermidConnect

distributor

601 108th Ave NE, Suite 2250, Bellevue, WA 98004, USA

001 (888) 910 1008

C

CPS - Chemical Products and Services

manufacturer

Grove Road, Wantage, Oxfordshire, OX12 7BZ, UNITED KINGDOM

+44 (0) 1235 773240

Emergency Contacts

Chemtrec

800-424-9300

24 hours

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Skin Corr. Cat. 1A H314
STOT RE Cat. 2 H373

GHS Pictograms

GHS05 - Corrosive

GHS05

GHS08 - Serious health hazard

GHS08

Hazard Statements

H314 Causes severe skin burns and eye damage.
H373 May cause damage to organs Glands through prolonged or repeated exposure.

Precautionary Statements

P280 Wear protective gloves/protective clothing/eye protection/face protection.
P310 Immediately call a POISON CENTER or doctor/physician.
P501 Dispose of contents/container in accordance with local regulations.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
SODIUM PERIODATE EC: 232-197-6 7790-28-5 5 - 10% Yes
SULPHURIC ACID ...% EC: 231-639-5 7664-93-9 1 - 5% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Unlikely route of exposure as the product does not contain volatile substances.

Symptoms: No specific symptoms noted.

Skin contact

Flush immediately with plenty of water and remove contaminated clothing. Call an ambulance, continue to rinse during transportation to hospital and bring these instructions.

Symptoms: May cause serious chemical burns to the skin.

Eye contact

Immediately flush with plenty of water. Remove any contact lenses and open eyes wide apart. Call an ambulance and continue flushing during transportation to hospital taking along these instructions.

Symptoms: May cause blurred vision and serious eye damage.

Ingestion

Immediately rinse mouth and drink plenty of water or milk. Keep person under observation. Do not induce vomiting. If vomiting occurs, keep head low. Transport immediately to hospital and bring along these instructions.

Symptoms: May cause chemical burns in mouth and throat.

Immediate Medical Attention

Transport immediately to hospital and bring along these instructions (for ingestion). Call an ambulance (for skin and eye contact).

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Extinguish with foam, carbon dioxide, dry powder or water fog.

Unsuitable media

None known.

Firefighter Protection

Self contained breathing apparatus and full protective clothing must be worn in case of fire. Severe corrosive hazard. Wear chemical protection suits.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Stop leak if possible without risk. DO NOT touch spilled material!

Environmental

Do not discharge onto the ground or into water courses.

Cleanup methods

Collect spillage with granulates, sawdust, rags or other absorbent. Flush with plenty of water to clean spillage area.

Materials: granulates, sawdust, rags or other absorbent

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid spilling, skin and eye contact. Do not eat, drink or smoke when using the product. Promptly remove any clothing that becomes wet. Wash promptly if skin becomes wet.

Storage

Store in tightly closed original container in a dry and cool place.

Hygiene

Do not eat, drink or smoke when using the product. Promptly remove any clothing that becomes wet. Wash promptly if skin becomes wet.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Provide adequate ventilation. Observe Occupational Exposure Limits and minimize the risk of inhalation of spray.

Hands

Wear protective gloves. Butyl rubber gloves are recommended. Neoprene gloves are recommended. Nitrile gloves are recommended.

Eyes

Wear tight-fitting goggles or face shield.

Respiratory

No specific recommendation made, but respiratory protection may still be required under exceptional circumstances when excessive air contamination exists.

Skin/Body

Wear appropriate clothing to prevent any possibility of skin contact.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Solidification Point
---
Appearance
Liquid
Boiling Point
100 °C
Flash Point
Not applicable.
Properties Status
---
Auto Ignition Temperature
Not available.
Crystallisation Point
---
Upper Explosive Limit
Not applicable.
Softening Point
---
Molecular Weight
---
Solubility In Water
Miscible with water
Melting Point
Not applicable.
Density
---
Evaporation Rate
Not available.
State Under Standard Conditions
---
Relative Evaporation Rate
---
Solubility In Fat
---
Partition Coefficient
---
Vapor Pressure
---
Decomposition Temperature
Not available.
Solubility
Miscible with water
Colour Intensity
---
Explosive Limits
---
Metal Corrosion
---
Vapor Density
Not applicable.
Kinematic Viscosity
Not available.
Bulk Density
---
Odor Threshold
---
Cloud Point
---
Form
---
Colour
Colourless to pale yellow.
Relative Density
1.08 g/ml @ 20 °C
Physical State Data
liquid
Freezing Point
---
Odor
Odorless.
Physical State
Liquid
Flammability
---
Dynamic Viscosity
---
Lower Explosive Limit
Not applicable.
Ph
1 ± 1
Voc Content
0 g/litre
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal temperature conditions and recommended use.

Reactivity

Reacts violently with strong acids. Generates very toxic gas in contact with acid. Chlorine. Reacts violently with strong alkaline substances.

Hazardous reactions

None known.

Avoid

Avoid excessive heat for prolonged periods of time.

Incompatible

Strong alkalis.

Decomposition

None at ambient temperatures.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

Small quantities in an industrial wastewater stream are easily treated in biological treatment systems.

Disposal

Residues and empty containers should be taken care of as hazardous waste according to local and national provisions. Contact specialist disposal companies.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
3264
Shipping Name
CORROSIVE LIQUID, ACIDIC, INORGANIC, N.O.S. (SODIUM PERIODATE, SULPHURIC ACID)
Transport Class
8
Packing Group
III
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

State and local regulations may apply.

Chemical Safety Assessment Not performed
?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for CPS STENCIL REMOVER CONCENTRATE 1:25?

The signal word is danger.

What is the physical form of CPS STENCIL REMOVER CONCENTRATE 1:25?

CPS STENCIL REMOVER CONCENTRATE 1:25 is a liquid appearing as liquid with colourless to pale yellow. color. It has odorless. odor.

What is the solubility of CPS STENCIL REMOVER CONCENTRATE 1:25?

Miscible with water

What is CPS STENCIL REMOVER CONCENTRATE 1:25 used for?

Industrial use: Screen printing

What are the hazard statements for CPS STENCIL REMOVER CONCENTRATE 1:25?

This substance has 2 hazard statements:

  • H314: Causes severe skin burns and eye damage.
  • H373: May cause damage to organs Glands through prolonged or repeated exposure.

What is the melting point of CPS STENCIL REMOVER CONCENTRATE 1:25?

The melting point is Not applicable. and the boiling point is 100 °C.