Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- MPM Screenwash -45C Concentrate
- Product Form
- Mixture
- Product Code
- 84000
Regulatory Identifiers
- CAS Number
- N/A
- UFI Code
- 1UVE-C231-AT7D-GAEE
Identified Uses
Anti-freezing agents
Manufacturers & Suppliers
MPM International Oil Company BV
manufacturer
Cyclotronweg 1, NL 2629 HN Delft, Zuid Holland, Nederland
+31 (0)15 2514030
http://www.mpmoil.com
Emergency Contacts
National Poisons Information Centre Beaumont Hospital
+353 1 809 2566
Healthcare professionals-24/7
National Poisons Information Centre Beaumont Hospital
+353 1 809 2166
public, 8am - 10pm, 7/7
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove victim to fresh air and keep at rest in a position comfortable for breathing. Get medical advice/attention if you feel unwell.
Symptoms: High concentration of vapours may induce: headache, nausea, dizziness. Coughing.
Rinse immediately contaminated clothing and skin with plenty of water before removing clothes.
Symptoms: Not expected to present a significant skin hazard under anticipated conditions of normal use.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Consult an ophthalmologist if irritation persists.
Symptoms: Eye irritation.
Let water be swallowed in little sips (dilution effect). Do NOT induce vomiting. Get medical advice/attention. Rinse mouth out with water.
Symptoms: Abdominal pain.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray, powder, foam and CO2.
Vapours may cause fire/explosion if source of ignition is present. Vapours may form explosive mixture with air.
Exercise caution when fighting any chemical fire. Use a water spray to cool exposed surfaces and to protect fire-fighters.
Firefighter Protection
Do not enter fire area without proper protective equipment, including respiratory protection.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Ensure adequate ventilation.
Notify authorities if product enters sewers or public waters. Avoid release to the environment.
Sand or other absorbent.
Materials: Sand or other absorbent.
Related Products
Similar products with comparable safety profiles
UNIPART SCREENWASH CONCENTRATE
---
MPM Coolant Premium Longlife -40°C G13 Ready to Use
UFI: QSKQ-5GAP-320Q-7KES
Kroon-Oil Screen Wash Concentrated
UFI: 9M90-80R1-K00A-S2K6
WINTER-SUMMER CONCENTRATED SCREEN WASH BARDAHL
---
CPS DEGREASER CONCENTRATE 1:10/15
---
MICRO-90® Concentrated Cleaning Solution
CAS: Not applicable to mixtures
WASH SOLVENT
---
-40°C Acwel Organic Acid Coolant
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Provide good ventilation in process area to prevent formation of vapour. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Do not eat, drink or smoke when using this product. Use only non-sparking tools. Avoid all eye and skin contact and do not breathe vapour and mist.
Keep only in original packaging. Store in a well-ventilated place. Keep container tightly closed. Keep cool.
Do not eat, drink or smoke when using this product. Wash hands thoroughly after handling.
Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Use only non-sparking tools.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure good ventilation of the work station.
Wear suitable gloves. Reusable gloves: Nitrile rubber (NBR). Permeation: 6 (> 480 minutes). Thickness: >0,35 mm. The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be observed.
Protective goggles. Safety glasses.
No personal breathing protective equipment is normally required. Not necessary with sufficient ventilation
None under normal use
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is stable at normal handling- and storage conditions.
None under normal use.
No additional information available
Protect from sunlight. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Keep cool.
Oxidizing substances.
On burning: release of harmful/irritant gases/vapours e.g.: carbon monoxide - carbon dioxide.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1170
- Shipping Name
- ETHANOL SOLUTION (ETHYL ALCOHOL SOLUTION)
- Transport Class
- 3
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for MPM Screenwash -45C Concentrate?
The signal word is warning.
What is the physical form of MPM Screenwash -45C Concentrate?
MPM Screenwash -45C Concentrate is a liquid. with blue. color. It has citrus-like. odor.
What is the solubility of MPM Screenwash -45C Concentrate?
completely soluble.
What is MPM Screenwash -45C Concentrate used for?
Anti-freezing agents
What are the hazard statements for MPM Screenwash -45C Concentrate?
This substance has 2 hazard statements:
- H226: Flammable liquid and vapour.
- H319: Causes serious eye irritation.
What is the melting point of MPM Screenwash -45C Concentrate?
The melting point is Not available and the boiling point is > 78 (78 – 1927) °C.