NextSDS Logo
Safety Data Sheet EN

DEOXO DS2 CATALYST

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
DEOXO DS2 CATALYST
Product Code
4585
Synonyms
0.2% Palladium on 2 to 5 mm alumina spheres, reduced

Regulatory Identifiers

CAS Number
N/A

Manufacturers & Suppliers

A

ANCO CATALYSTS LTD

manufacturer

GLENFIELD HOUSE, WORCESTER ROAD, UPTON WARREN, WORCESTERSHIRE, B61 7EP, ENGLAND

Emergency Contacts

ANCO CATALYSTS LTD

01527 861 535

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

GHS Pictograms

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Palladium --- 0.2% No
Alumina 1344-28-1 99.8% No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Move to fresh air. If necessary seek medical advice

Symptoms: slightly irritating to respiratory system

Skin contact

Wash with soap and water

Eye contact

IMMEDIATELY rinse with plenty of water for at least 15 minutes with eye lids open

Symptoms: slightly irritating to eyes

Ingestion

Rinse mouth with water. Drink plenty of water

Immediate Medical Attention

Seek immediate medical advice

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

All extinguishing agents may be used

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Environmental

Prevent product from reaching sewers streams or water sources

Cleanup methods

Sweep up or vacuum up.

Materials: plastic bags

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Do not transport or store with organic or flammable substances. Handle with care to avoid abrasion or breakage. Avoid formation of dust.

Storage

Keep containers tightly closed and store in a dry, cool and ventilated area.

Fire prevention

The product is not flammable. On removal from the process the catalyst can be self heating when it comes in contact with air after it has been in previous contact with H2 or organic compounds.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Components with critical values that require monitoring at the workplace: Alumina (aluminium oxide) mg/m3: ACGIH TLV 10 ; Not classified as a human carcinogen, Austria MAK 5 (dust), Belgium MAK 5, Denmark TWA 10 (Al), France VME 10, Germany MAK 6, Noway TLV 2 (Al), Sweden TWA 4 (Al), United Kingdom TWA 10 (total inhalable dust), 4 (resirable dust), USA PEL 15 (total dust), 5 (respirable fraction); Palladium Compounds :0.002mg/m3 (German MAK)

Hands

Use protective gloves

Eyes

safety spectacles

Respiratory

Respiratory protective devise with a particle filter

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Spherical pellets
Physical State Data
solid
State Under Standard Conditions
---
Appearance
Spherical pellets 2mm to 5 mm
Colour
light grey
Colour Intensity
---
Form
light grey pellets
Odor
---
Odor Threshold
---
Ph
Not applicable
Melting Point
> 2000°C
Boiling Point
Not applicable
Flash Point
---
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
---
Vapor Pressure
---
Vapor Density
---
Relative Density
---
Bulk Density
approx 0.9 Kg/l
Density
---
Flammability
---
Upper Explosive Limit
---
Lower Explosive Limit
---
Explosive Limits
---
Auto Ignition Temperature
Not applicable
Decomposition Temperature
---
Solubility
insoluble
Partition Coefficient
---
Solubility In Water
insoluble
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
---
Kinematic Viscosity
---
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

No decomposition, if stored and applied as directed

Avoid

Avoid rough handling and store in dry area

Incompatible

Avoid contact with flammable substances

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Disposal

Refer to Anco for advise on disposal.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

Transport Class
Class None
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

R36/37/38 Irritating to eyes and respiratory system and skin. Safety Phrases: S26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.

Chemical Safety Assessment Not performed
?

Frequently Asked Questions

Common questions about safety, handling, and properties

What other names is DEOXO DS2 CATALYST known by?

DEOXO DS2 CATALYST is also known as: 0.2% Palladium on 2 to 5 mm alumina spheres, reduced

What is the hazard signal word for DEOXO DS2 CATALYST?

The signal word is no signal word.

What is the physical form of DEOXO DS2 CATALYST?

DEOXO DS2 CATALYST is a spherical pellets appearing as spherical pellets 2mm to 5 mm with light grey color.

What is the solubility of DEOXO DS2 CATALYST?

insoluble

What is the melting point of DEOXO DS2 CATALYST?

The melting point is > 2000°C and the boiling point is Not applicable.