Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BONDERITE C-IC DEOXLM MF ACID CLEANER known as DEOXALUME MF
- Product Code
- 790223
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Rust dissolver
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS06
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Ammonium bifluoride | 1341-49-7 | 80 - 100% | Yes |
| Ammonium fluoride | 12125-01-8 | 1 - 5% | Yes |
Notes
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
If inhaled, immediately remove the affected person to fresh air. Get medical attention.
Immediately wash skin thoroughly with soap and water. Get medical attention.
In case of contact with the eyes, rinse immediately with plenty of water for 15 minutes, and seek immediate medical attention.
Get immediate medical attention. Do not induce vomiting.
Immediate Medical Attention
Get immediate medical attention.
Medical Treatment
Treatment of hypocalcemia associated with corrosive fluoride compounds exposure may be corrected by intravenous calcium gluconate or calcium chloride. Treatment of hypomagnesemia may be corrected by intravenous magnesium sulfate. Treat symptomatically and supportively.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
May liberate large quantities of dense, foul-smelling smoke which may contain unidentified toxic gasses.
Wear full protective clothing.
Firefighter Protection
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Wear appropriate personal protective equipment. Prevent further leakage or spillage if safe to do so. Do not let product enter drains.
Sweep up or gather material and place in appropriate container for disposal.
Related Products
Similar products with comparable safety profiles
BONDERITE C-IC 182B ACID CLEANER known as DEOXIDINE 182B
---
BONDERITE C-IC NP 7200 ACID CLEANER known as DEOXIDINE NP 7200
---
BONDERITE C-IC DEOXDZR 6MU ACID DEOXIDIZER AERO
---
BONDERITE C-IC HX-357 MU ACID DEOXIDIZER
---
BONDERITE C-IC 20 ACID DEOXIDIZER known as DEOXIDINE 20
---
BONDERITE C-IC DEOXDZR 6MU AERO ACID DEOXIDIZER
---
BONDERITE C-IC ALDOX V AERO ACID DEOXIDIZER
---
BONDERITE C-IC A-500 DEOXIDIZER
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin and clothing. Avoid breathing dust. Provide adequate ventilation. Wash thoroughly after handling. For industrial use only. Do not take internally.
Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials.
Wash thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Not available.
Will not occur.
Avoid contact with acids and oxidizing agents. Keep away from alkalis.
This material will react with glass, concrete, certain metals, silica containing materials, rubber, leather, and many organics.
Decomposition of this product may yield ammonia gas. May liberate hydrogen fluoride.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1727
- Shipping Name
- Ammonium hydrogendifluoride, solid
- Transport Class
- 8
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for BONDERITE C-IC DEOXLM MF ACID CLEANER known as DEOXALUME MF?
The signal word is danger.
What is the physical form of BONDERITE C-IC DEOXLM MF ACID CLEANER known as DEOXALUME MF?
BONDERITE C-IC DEOXLM MF ACID CLEANER known as DEOXALUME MF is a solid with white color. It has odourless / odorless odor.
What is the solubility of BONDERITE C-IC DEOXLM MF ACID CLEANER known as DEOXALUME MF?
Appreciable
What is BONDERITE C-IC DEOXLM MF ACID CLEANER known as DEOXALUME MF used for?
Rust dissolver
What are the hazard statements for BONDERITE C-IC DEOXLM MF ACID CLEANER known as DEOXALUME MF?
This substance has 2 hazard statements:
- H301: TOXIC IF SWALLOWED.
- H314: CAUSES SEVERE SKIN BURNS AND EYE DAMAGE.
What is the melting point of BONDERITE C-IC DEOXLM MF ACID CLEANER known as DEOXALUME MF?
The melting point is 257 °F (125°C) and the boiling point is 464 °F (240°C).