NextSDS Logo
Safety Data Sheet EN

BONDERITE C-IC A-500 DEOXIDIZER

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
BONDERITE C-IC A-500 DEOXIDIZER
Product Code
777789
Synonyms
DEOXIDINE A-500

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Cleaner

Uses advised against

None identified

Manufacturers & Suppliers

Henkel Corporation logo

Henkel Corporation

manufacturer

One Henkel Way, Rocky Hill, Connecticut 06067

+1 (860) 571-5100

www.henkelina.com

Emergency Contacts

Poison Control Center

1-877-671-4608

Poison Control Center

1-303-592-1711

CHEMTREC

1-800-424-9300

CHEMTREC

1-703-527-3887

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Met. Corr. Cat. 1 H290
Skin Corr. Cat. 1B H314
Eye Dam. Cat. 1 H314

GHS Pictograms

GHS05 - Corrosive

GHS05

Hazard Statements

H290 MAY BE CORROSIVE TO METALS.
H314 CAUSES SEVERE SKIN BURNS AND EYE DAMAGE.

Precautionary Statements

P234 Keep only in original packaging.
P260 Do not breathe vapors, mist, or spray.
P264 Wash affected area thoroughly after handling.
P280 Wear protective gloves, clothing, eye and face protection.
P301 + P330 + P331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
P303 + P361 + P353 If on skin (or hair): Take off immediately all contaminated clothing.
P304 + P340 + P310 IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. Immediately call a POISON CENTER or physician.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P363 Wash contaminated clothing before reuse.
P390 Absorb spillage to prevent material damage.
P405 Store locked up.
P501 Dispose of contents and/or container according to Federal, State/Provincial and local governmental regulations.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Hydrochloric acid 7647-01-0 30 - 60% Yes

Notes

* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove person immediately to fresh air.

Skin contact

Remove contaminated clothing and footwear. Flush with large amounts of water. Wash clothing before reuse.

Eye contact

Rinse immediately with plenty of water for 15 minutes.

Ingestion

Do not induce vomiting. Give one to two glasses of water or milk. Never give anything by mouth to a victim who is unconscious or is having convulsions.

Immediate Medical Attention

Seek medical attention if symptoms develop or persist (inhalation). Seek immediate medical attention (skin contact). Seek immediate medical attention (eye contact). Seek medical advice (ingestion).

Medical Treatment

Treat symptomatically and supportively.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Water spray (fog), foam, dry chemical or carbon dioxide.

Unsuitable media

Not available.

Specific hazards

May liberate large quantities of dense, foul-smelling smoke which may contain unidentified toxic gasses.

Instructions

Wear full protective clothing. Wear self-contained breathing apparatus.

Firefighter Protection

Wear full protective clothing. Wear self-contained breathing apparatus.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.

Environmental

Prevent further leakage or spillage if safe to do so. Wear appropriate protective equipment and clothing during clean-up. Do not allow product to enter sewer or waterways.

Cleanup methods

Absorb spill with inert material. Shovel material into appropriate container for disposal. Dispose of according to Federal, State and local governmental regulations.

Materials: inert material

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist. Wash thoroughly after handling. Use only with adequate ventilation. Do not take internally. For industrial use only.

Storage

Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials.

Hygiene

Wash thoroughly after handling.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Voc Content
0 % (calculated)
Solubility
Complete
Partition Coefficient
Not determined
Physical State
Liquid
Solubility In Fat
---
Colour
Light amber
Softening Point
---
Evaporation Rate
Not determined
Bulk Density
---
Melting Point
Not determined
Solidification Point
---
Crystallisation Point
---
Boiling Point
> 100 °C (> 212°F)
Properties Status
---
Vapor Density
---
Auto Ignition Temperature
Not applicable
Kinematic Viscosity
Not available.
Form
---
Decomposition Temperature
Not available.
Metal Corrosion
---
Appearance
---
Molecular Weight
---
Physical State Data
liquid
Flash Point
Not applicable
Odor
Pungent
Relative Density
1.15 - 1.18
Cloud Point
---
Ph
1 - 2
Relative Evaporation Rate
---
Solubility In Water
---
Explosive Limits
---
Upper Explosive Limit
Not available.
Density
---
Odor Threshold
Not available.
Flammability
Not applicable
Dynamic Viscosity
Not available.
Lower Explosive Limit
Not available.
Freezing Point
---
State Under Standard Conditions
---
Vapor Pressure
Not determined
Colour Intensity
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable at normal conditions.

Reactivity

Not available.

Hazardous reactions

None under normal processing.

Avoid

Keep away from heat, ignition sources and incompatible materials.

Incompatible

This product may react with strong acids, bases and oxidizing agents. Do not mix with chlorates. Adding water to this product may cause localized overheating and splattering.

Decomposition

Thermal decomposition may yield hydrogen chloride. Upon combustion, oxides of chlorine may be released.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1789
Shipping Name
Hydrochloric acid solution
Transport Class
8
Packing Group
II
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What other names is BONDERITE C-IC A-500 DEOXIDIZER known by?

BONDERITE C-IC A-500 DEOXIDIZER is also known as: DEOXIDINE A-500

What is the hazard signal word for BONDERITE C-IC A-500 DEOXIDIZER?

The signal word is danger.

What is the physical form of BONDERITE C-IC A-500 DEOXIDIZER?

BONDERITE C-IC A-500 DEOXIDIZER is a liquid with light amber color. It has pungent odor.

What is the solubility of BONDERITE C-IC A-500 DEOXIDIZER?

Complete

What is BONDERITE C-IC A-500 DEOXIDIZER used for?

Cleaner

What are the hazard statements for BONDERITE C-IC A-500 DEOXIDIZER?

This substance has 2 hazard statements:

  • H290: MAY BE CORROSIVE TO METALS.
  • H314: CAUSES SEVERE SKIN BURNS AND EYE DAMAGE.

What is the melting point of BONDERITE C-IC A-500 DEOXIDIZER?

The melting point is Not determined and the boiling point is > 100 °C (> 212°F).