Weld Spray Perfect 400ml

If inhaled, remove to fresh air. Get medical attention if symptoms occur.

In case of contact, immediately flush skin with plenty of water. Get medical attention if symptoms occur.

Flush eyes with water as a precaution. Get medical attention if irritation develops and persists.

Symptoms: irritation develops and persists

If swallowed, DO NOT induce vomiting. Get medical attention if symptoms occur. Rinse mouth thoroughly with water.

Minimize workplace exposure concentrations. If sufficient ventilation is unavailable, use with local exhaust ventilation. If advised by assessment of the local exposure potential, use only in an area equipped with ex-plosion-proof exhaust ventilation.

Material : Fluorinated rubber, Break through time : 480 min, Glove thickness : 0.6 mm; Material : butyl-rubber, Break through time : 480 min, Glove thickness : 0.6 mm. Remarks : Choose gloves to protect hands against chemicals depending on the concentration and quantity of the hazardous sub- stance and specific to place of work. For special applications, we recommend clarifying the resistance to chemicals of the aforementioned protective gloves with the glove manufactur- er. Wash hands before breaks and at the end of workday.

Please follow all applicable local/national requirements when selecting protective measures for a specific workplace. Wear the following personal protective equipment: Safety glasses Always wear eye protection when the potential for inadvertent eye contact with the product cannot be excluded. Equipment should conform to BS EN 166

If adequate local exhaust ventilation is not available or expo- sure assessment demonstrates exposures outside the rec- ommended guidelines, use respiratory protection. Equipment should conform to BS EN 137

Wear the following personal protective equipment: If assessment demonstrates that there is a risk of explosive atmospheres or flash fires, use flame retardant antistatic pro- tective clothing.