Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- WELDINGSPRAY PERFECT - 400 ML
- Product Code
- 0893102100
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Surface treatment, Preservative
Manufacturers & Suppliers
Adolf Wuerth GmbH & Co. KG
manufacturer
Reinhold-Würth-Str. 12-17, 74653 Künzelsau
+49 794015 0
Emergency Contacts
Emergency Contact
+49 (0)6132 – 84463
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Sodium nitrite EC: 231-555-9 | 7632-00-0 | 0.1 - 0.25% | Yes |
| Reaction mass of: 5-chloro-2- methyl-4-isothiazolin-3-one [EC no. 247-500-7] and 2-methyl-2H- isothiazol-3-one [EC no. 220-239- 6] (3:1) | 55965-84-9 | 0.0002 - 0.0015% | Yes |
| Dimethyl ether EC: 204-065-8 | 115-10-6 | 20 - 30% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
If inhaled, remove to fresh air. Get medical attention if symptoms occur.
In case of contact, immediately flush skin with plenty of water. Get medical attention if symptoms occur.
Flush eyes with water as a precaution. Get medical attention if irritation develops and persists.
Symptoms: irritation develops and persists
If swallowed, DO NOT induce vomiting. Get medical attention if symptoms occur. Rinse mouth thoroughly with water.
Immediate Medical Attention
Treat symptomatically and supportively.
Medical Treatment
Treat symptomatically and supportively.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Processing may form hazardous compounds (see section 10). Minimize workplace exposure concentrations. Use only in an area equipped with explosion-proof exhaust ventilation if advised by assessment of the local exposure potential. Use with local exhaust ventilation.
Material: Fluorinated rubber, Break through time: >= 480 min, Glove thickness: 0,6 mm. Material: butyl-rubber, Break through time: >= 480 min, Glove thickness: 0,6 mm. Remarks: Choose gloves to protect hands against chemicals depending on the concentration and quantity of the hazardous substance and specific to place of work. For special applications, we recommend clarifying the resistance to chemicals of the aforementioned protective gloves with the glove manufacturer. Wash hands before breaks and at the end of workday.
Please follow all applicable local/national requirements when selecting protective measures for a specific workplace. Wear the following personal protective equipment: Safety glasses. Always wear eye protection when the potential for inadvertent eye contact with the product cannot be excluded. Equipment should conform to DIN EN 166.
Use respiratory protection unless adequate local exhaust ventilation is provided or exposure assessment demonstrates that exposures are within recommended exposure guidelines. Equipment should conform to DIN EN 133. Filter type: Self-contained breathing apparatus.
Wear the following personal protective equipment: Flame retardant antistatic protective clothing, unless assessment demonstrates that the risk of explosive atmospheres or flash fires is low.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN 1950
- Shipping Name
- AEROSOLS
- Packing Group
- Not assigned by regulation
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for WELDINGSPRAY PERFECT - 400 ML?
The signal word is danger.
What is the physical form of WELDINGSPRAY PERFECT - 400 ML?
WELDINGSPRAY PERFECT - 400 ML is a aerosol containing a liquefied gas appearing as aerosol containing a liquefied gas with off-white color. It has characteristic odor.
What is the solubility of WELDINGSPRAY PERFECT - 400 ML?
emulsifiable
What is WELDINGSPRAY PERFECT - 400 ML used for?
Surface treatment, Preservative
What are the hazard statements for WELDINGSPRAY PERFECT - 400 ML?
This substance has 3 hazard statements:
- H222: Extremely flammable aerosol.
- H229: Pressurised container: May burst if heated.
- H336: May cause drowsiness or dizziness.
What is the melting point of WELDINGSPRAY PERFECT - 400 ML?
The melting point is No data available and the boiling point is > 350.