Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LOCTITE X 39 99C 2C 0.7MM H
- Synonyms
- 99C X39 2C 0.7MM 0.5KG RLR
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Solder Wire
Manufacturers & Suppliers
Henkel Ltd
manufacturer
Wood Lane End, HP2 4RQ Hemel Hempstead, Great Britain
+44 1442 278000
Emergency Contacts
Emergency Contact
+44 (0)1442 278497
24 Hours
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Tin EC: 231-141-8 | 7440-31-5 | 80 - 100% | No |
Notes
For full text of the H - statements and other abbreviations see section 16 "Other information". Substances without classification may have community workplace exposure limits available.
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If symptoms persist, seek medical advice.
Symptoms: Flux fumes may irritate the nose, throat and lungs.
Rinse with running water and soap. Obtain medical attention if irritation persists.
Symptoms: Irritation.
Flush eyes with plenty of water for at least 5 minutes. If irritation persists seek medical attention.
Symptoms: Irritation.
Do not induce vomiting. Seek medical advice.
Immediate Medical Attention
Seek medical advice if symptoms persist for inhalation, skin, or eye contact. Seek medical advice for ingestion.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Extraction is necessary to remove fumes evolved during reflow. Where reasonably practicable this should be achieved by the use of local exhaust ventilation and good general extraction. Ensure good ventilation/extraction.
Chemical-resistant protective gloves (EN 374). Suitable materials for short-term contact or splashes (recommended: at least protection index 2, corresponding to > 30 minutes permeation time as per EN 374): nitrile rubber (NBR; >= 0.4 mm thickness) Suitable materials for longer, direct contact (recommended: protection index 6, corresponding to > 480 minutes permeation time as per EN 374): nitrile rubber (NBR; >= 0.4 mm thickness) This information is based on literature references and on information provided by glove manufacturers, or is derived by analogy with similar substances. Please note that in practice the working life of chemical-resistant protective gloves may be considerably shorter than the permeation time determined in accordance with EN 374 as a result of the many influencing factors (e.g. temperature). If signs of wear and tear are noticed then the gloves should be replaced.
Safety glasses with sideshields or chemical safety goggles should be worn if there is a risk of splashing.
Ensure adequate ventilation. An approved mask or respirator fitted with an an organic vapour cartridge should be worn if the product is used in a poorly ventilated area In case of aerosol formation, we recommend wearing of appropriate respiratory protection equipment with ABEK P2 filter. This recommendation should be matched to local conditions.
Wear suitable protective clothing.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is LOCTITE X 39 99C 2C 0.7MM H known by?
LOCTITE X 39 99C 2C 0.7MM H is also known as: 99C X39 2C 0.7MM 0.5KG RLR
What is the hazard signal word for LOCTITE X 39 99C 2C 0.7MM H?
The signal word is no signal word.
What is the physical form of LOCTITE X 39 99C 2C 0.7MM H?
LOCTITE X 39 99C 2C 0.7MM H is a solid appearing as solid with grey color.
What is the solubility of LOCTITE X 39 99C 2C 0.7MM H?
Insoluble (Solvent: Water)
What is LOCTITE X 39 99C 2C 0.7MM H used for?
Solder Wire
What is the melting point of LOCTITE X 39 99C 2C 0.7MM H?
The melting point is 227 (440.6 F) and the boiling point is No data available / Not applicable.