Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LOCTITE 105 60EN 5C 0.7MM SA
- Chemical Name
- Lead
- Synonyms
- 60EN 105 5C
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Solder Wire
Emergency Contacts
Henkel information service
+49-(0)211-797-3350
around-the-clock
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If symptoms persist, seek medical advice.
Symptoms: Flux fumes may irritate the nose, throat and lungs and may after prolonged/repeated exposure give an allergic reaction (asthma).
Rinse with running water and soap. Obtain medical attention if irritation persists.
Symptoms: Prolonged or repeated contact may cause skin irritation.
Flush eyes with plenty of water for at least 5 minutes. If irritation persists seek medical attention.
Symptoms: Prolonged or repeated contact may cause eye irritation.
Do not induce vomiting. Seek medical advice.
Immediate Medical Attention
See section: Description of first aid measures
Medical Treatment
See section: Description of first aid measures
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
water, carbon dioxide, foam, powder, Fine water spray
Do not use water on fires where molten metal is present.
High temperatures may produce heavy metal dust, fumes or vapours. The flux medium will give rise to irritating fumes.
Firefighter Protection
Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Wear protective equipment. Ensure adequate ventilation. Avoid contact with skin and eyes.
Do not empty into drains / surface water / ground water.
Scrape up spilled material and place in a closed container for disposal.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Extraction is necessary to remove fumes evolved during reflow. When using do not eat, drink or smoke. Wash hands before breaks and immediately after handling the product. Avoid breathing fumes given out during soldering. Do not heat above 500 °C.
Store in a cool, dry place.
Good industrial hygiene practices should be observed. Do not eat, drink or smoke while working. After handling solder wash hands with soap and water before eating, drinking or smoking.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Extraction is necessary to remove fumes evolved during reflow. Ensure adequate ventilation, especially in confined areas.
Please note that in practice the working life of chemical resistant gloves may be considerably reduced as a result of many influencing factors (e.g. temperature). Suitable risk assessment should be carried out by the end user. If signs of wear and tear are noticed then the gloves should be replaced. The use of chemical resistant gloves such as Nitrile is recommended.
Safety glasses with sideshields or chemical safety goggles should be worn if there is a risk of splashing. Protective eye equipment should conform to EN166.
Ensure adequate ventilation. An approved mask or respirator fitted with an organic vapour cartridge should be worn if the product is used in a poorly ventilated area. In case of aerosol formation, we recommend wearing of appropriate respiratory protection equipment with ABEK P2 filter (EN 14387). This recommendation should be matched to local conditions.
Wear suitable protective clothing. Protective clothing should conform to EN 14605 for liquid splashes or to EN 13982 for dusts.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under recommended storage conditions.
Solder alloy will react with concentrated nitric acid to produce toxic fumes of nitrogen oxides.
See section reactivity
No decomposition if stored and applied as directed.
See section reactivity.
Thermal decomposition can lead to release of irritating gases and vapors.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is LOCTITE 105 60EN 5C 0.7MM SA known by?
LOCTITE 105 60EN 5C 0.7MM SA is also known as: 60EN 105 5C
What is the hazard signal word for LOCTITE 105 60EN 5C 0.7MM SA?
The signal word is danger.
What is the physical form of LOCTITE 105 60EN 5C 0.7MM SA?
LOCTITE 105 60EN 5C 0.7MM SA is a solid appearing as solid material, grey with grey color.
What is the solubility of LOCTITE 105 60EN 5C 0.7MM SA?
No data available / Not applicable
What is LOCTITE 105 60EN 5C 0.7MM SA used for?
Solder Wire
What are the hazard statements for LOCTITE 105 60EN 5C 0.7MM SA?
This substance has 3 hazard statements:
- H360FD: May damage fertility. May damage the unborn child.
- H362: May cause harm to breast-fed children.
- H372: Causes damage to organs (Blood, Kidney, Central Nervous system) through prolonged or repeated exposure (inhalation-dust, oral)
What is the melting point of LOCTITE 105 60EN 5C 0.7MM SA?
The melting point is 183 - 188 °C (361.4 - 370.4 °F) and the boiling point is No data available / Not applicable.