Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Spy Dry - Leak-Finder Spray
- Product Code
- 2896662500
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Lubricant
Uses advised against
None known.
Manufacturers & Suppliers
Normfest GmbH
national supplier
Siemensstraße 23, 42551 Velbert / GERMANY
+49 2051 275-0
http://www.normfest.com
Emergency Contacts
NHS
111
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Ensure supply of fresh air. In the event of symptoms seek medical treatment.
In case of contact with skin wash off immediately with soap and water. Consult a doctor if skin irritation persists.
In case of contact with eyes rinse thoroughly with plenty of water and seek medical advice.
Do not induce vomiting. In the event of symptoms seek medical treatment.
Immediate Medical Attention
Treat symptomatically.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure adequate ventilation on workstation.
0.45 mm Nitrile rubber, >480 min (EN 374-1/-2/-3). The details concerned are recommendations. Please contact the glove supplier for further information.
Safety glasses. (EN 166:2001)
In the event of occupational exposure limits being exceeded or of inadequate ventilation: wear appropriate respiratory protection. Short term: filter apparatus, combination filter A-P2. (DIN EN 14387)
Solvent-resistant protective clothing (EN 340)
not determined
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1950
- Packing Group
- not applicable
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Spy Dry - Leak-Finder Spray?
The signal word is danger.
What is the physical form of Spy Dry - Leak-Finder Spray?
Spy Dry - Leak-Finder Spray is a liquid with white color. It has characteristic odor.
What is the solubility of Spy Dry - Leak-Finder Spray?
No information available.
What is Spy Dry - Leak-Finder Spray used for?
Lubricant
What are the hazard statements for Spy Dry - Leak-Finder Spray?
This substance has 4 hazard statements:
- H222: Extremely flammable aerosol.
- H229: Pressurised container: May burst if heated.
- H319: Causes serious eye irritation.
- H336: May cause drowsiness or dizziness.
What is the melting point of Spy Dry - Leak-Finder Spray?
The melting point is not applicable and the boiling point is not determined.