Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- TRIPLE QX SynPlus Ford 0W30 Synthetic
- Product Form
- Mixture
- Product Code
- TQX.11017
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Lubricants and additives
Uses advised against
No additional information available.
Manufacturers & Suppliers
MPM International Oil Company B.V.
manufacturer
Cyclotronweg 1, 2629 HN Delft Delft - Nederland
0031 (0)15 2514030
http://www.tripleqx.com
Emergency Contacts
Emergency Contact
+31 (0)15 2514030
08.00 - 17.00 GMT+1
National Poisons Information Centre Beaumont Hospital
+353 1 809 2566
24/7
National Poisons Information Centre Beaumont Hospital
+353 1 809 2166
8am - 10pm, 7/7
Guy's & St Thomas' Poisons Unit Medical Toxicology Unit, Guy's & St Thomas' Hospital Trust
+44 20 7188 7188
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Highly refined mineral oil, contains <3% (w/w) DMSO extract, according to IP346
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Phosphorodithioic acid, mixed O,O-bis(sec-Bu and 1,3-dimethylbutyl) esters, zinc salts EC: 272-238-5 | 68784-31-6 | 1 - 1.49% | Yes |
| Alkyl (C18-C28) toluene sulfonic acid, calcium salts, borated. EC: 953-650-0 | --- | 0.1 - 0.99% | Yes |
Notes
Highly refined mineral oil, contains <3% (w/w) DMSO extract, according to IP346
First Aid Measures
Emergency procedures for chemical exposure incidents
Not required.
Wash skin with mild soap and water.
In case of eye contact, immediately rinse with clean water for 10-15 minutes.
Do NOT induce vomiting. Rinse mouth out with water. Get immediate medical advice/attention.
Immediate Medical Attention
Get immediate medical advice/attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray, powder, foam and CO2.
Do not use a heavy water stream.
Use water spray or fog for cooling exposed containers.
Firefighter Protection
Do not enter fire area without proper protective equipment, including respiratory protection.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Do not breathe vapours.
Prevent entry to sewers and public waters.
Detergent. Clean up any spills as soon as possible, using an absorbent material to collect it.
Materials: absorbent material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
Keep container closed when not in use. Store in dry, well-ventilated area.
Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work.
Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No additional information available.
Protective gloves
Safety goggles
No special respiratory protection equipment is recommended under normal conditions of use with adequate ventilation
No special clothing/skin protection equipment is recommended under normal conditions of use
No additional information available.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions of use.
None under normal conditions.
No dangerous reactions known under normal conditions of use.
No naked flames, sparks, and do not smoke.
Strong oxidizing agent. Acids and bases.
None under normal conditions.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose in a safe manner in accordance with local/national regulations.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- Not regulated
- Shipping Name
- Not regulated
- Transport Class
- Not regulated
- Packing Group
- Not regulated
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for TRIPLE QX SynPlus Ford 0W30 Synthetic?
The signal word is no signal word.
What is the physical form of TRIPLE QX SynPlus Ford 0W30 Synthetic?
TRIPLE QX SynPlus Ford 0W30 Synthetic is a liquid appearing as oily liquid. with amber. color. It has characteristic. odor.
What is the solubility of TRIPLE QX SynPlus Ford 0W30 Synthetic?
Slightly soluble, the product remains on the water surface.
What is TRIPLE QX SynPlus Ford 0W30 Synthetic used for?
Lubricants and additives
What is the melting point of TRIPLE QX SynPlus Ford 0W30 Synthetic?
The melting point is Not available and the boiling point is Not available.