Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- SAS Exhaust Assembly Paste
- Product Code
- SAS210
Regulatory Identifiers
- CAS Number
- N/A
Manufacturers & Suppliers
Van-Line Ltd
national supplier
Gelderd Road, Leeds, LS12 6NA
+44(0)113 213 4301
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| SODIUM SILICATE | 1344-09-8 | 15 - 45% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
There are no hazards associated with this product by inhalation.
Symptoms: No hazards associated with this product by inhalation.
Promptly wash contaminated skin with soap and water.
Symptoms: Irritating to skin. May cause sensitisation by skin contact.
Promptly wash eyes with plenty of water while lifting the eye lids. Continue to rinse for at least 15 minutes and seek medical attention.
Symptoms: Irritating to eyes.
There are no hazards associated with this product by ingestion.
Symptoms: No hazards associated with this product by ingestion.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray, fog or mist. Powder, foam or CO2.
Irritating gases/vapour/fumes of Carbon monoxide (CO).
Firefighter Protection
Wear self-contained breathing apparatus. Wear protective clothing to prevent contact with skin and eyes.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
N/A.
No specific clean up procedure noted.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Read and follow directions for use.
Keep in closed containers in a moderate temperatures, dry and ventilated environment.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
protective gloves are worn for prolonged skin contact
protective gloves are worn for prolonged skin contact.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
Unspecified.
Strong oxidising agents.
Irritating gases/vapours/fumes of Carbon Dioxide (CO).
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
No specific disposal method required.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Hazard symbols: Not Classified. Safety phrases: S2: Keep out of reach of Children; S26: In cases of contact with eyes, rinse immediately with plenty of water and seek medical advice; S37: Wear suitable gloves; S46: If swallowed seek medical advice immediately and show container label.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for SAS Exhaust Assembly Paste?
The signal word is no signal word.
What is the physical form of SAS Exhaust Assembly Paste?
SAS Exhaust Assembly Paste is a viscous paste/putty. with depends on product type. color. It has no characteristic odour. odor.
What is the solubility of SAS Exhaust Assembly Paste?
N/D