Chemical Product Identification & Regulatory Data
Official chemical identifiers, CAS numbers, and regulatory compliance information
Basic Product Information
Regulatory Identifiers
Chemical Abstracts Service registry number - unique identifier for chemical substances
Uses Information
Overview
SAS8 SILICONE SPRAY 500ML is a aerosol. substance commonly used universal lubricant. silicone oil..
Manage Your Safety Data Sheets
Organize and access your chemical safety data with ease.
GHS Hazard Classification & Safety Warnings
Globally Harmonized System (GHS) hazard pictograms, signal words, and safety classifications
Classification Status
Signal Word
Hazard Classifications
GHS Hazard Pictograms & Safety Symbols
GHS02
GHS07
GHS09
GHS (Globally Harmonized System) pictograms indicate specific chemical hazard categories and safety precautions
Hazard Statements
- H222: Extremely flammable aerosol.
- H229: Pressurised container: may burst if heated.
- H315: Causes skin irritation.
- H336: May cause drowsiness or dizziness.
- H411: Toxic to aquatic life with long lasting effects.
Precautionary Statements
- P102: Keep out of reach of children.
- P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
- P211: Do not spray on an open flame or other ignition source.
- P251: Do not pierce or burn, even after use.
- P261: Avoid breathing vapour/ spray.
- P271: Use only outdoors or in a well-ventilated area.
- P280: Wear protective gloves/ protective clothing/ eye protection/ face protection.
- P302+P352: IF ON SKIN: Wash with plenty of water.
- P332+P313: If skin irritation occurs: Get medical advice/ attention.
- P410+P412: Protect from sunlight. Do not expose to temperatures exceeding 50/122F.
- P501: Dispose of contents/ container in accordance with local regulations.
- P304+P340: IF INHALED: Remove person to fresh air and keep comfortable for breathing.
- P312: Call a POISON CENTRE/doctor if you feel unwell.
- P362+P364: Take off contaminated clothing and wash it before reuse.
Chemical Manufacturers & Supply Chain
Authorized suppliers, manufacturers, and distribution network information
VAN LINE LTD
undefined
1 HARKER WAY LEEDS WEST YORKSHIRE ENGLAND LS9 0DY
GB
+44 (0) 113 213 4300
+44 (0) 113 868 1320
24/7 Emergency Response & Poison Control
Critical emergency contact numbers for chemical spills, exposure incidents, and medical emergencies
Emergency Contact
0044 (0) 7970 779978
GB
Chemical Composition & Hazardous Ingredients
Detailed component analysis, concentration ranges, and hazardous substance identification
Product Type
MixturesChemical Components & Hazardous Substances
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Petroleum gases, liquefied EC: 270-704-2 | 68476-85-7 | 30-60% | ⚠️ Hazardous |
| Hydrocarbons, C6-C7, n-alkanes, isoalkanes, cyclics, <5% n-hexane EC: 921-024-6 | N/A | 30-60% | ⚠️ Hazardous |
| n-hexane EC: 203-777-6 | 110-54-3 | 1% | ⚠️ Hazardous |
Emergency First Aid Measures
Critical first aid procedures for chemical exposure incidents and medical emergencies
🫁 Inhalation Exposure
Move affected person to fresh air and keep warm and at rest in a position comfortable for breathing. Loosen tight clothing such as collar, tie or belt. Get medical attention if symptoms are severe or persist. Place unconscious person on their side in the recovery position and ensure breathing can take place.
Symptoms:
Spray/mists may cause respiratory tract irritation.
🖐️ Skin Contact
Remove contamination with soap and water or recognised skin cleansing agent.
Symptoms:
Repeated exposure may cause skin dryness or cracking.
👁️ Eye Contact
Remove any contact lenses and open eyelids wide apart. Rinse with water. Get medical attention if any discomfort continues.
Symptoms:
Vapour or spray in the eyes may cause irritation and smarting. Particles in the eyes may cause irritation and smarting.
🍽️ Ingestion/Swallowing
Rinse mouth thoroughly with water. If in doubt, get medical attention promptly. Due to the small packaging, the risk of ingestion is minimal. Do not induce vomiting unless under the direction of medical personnel.
Symptoms:
Due to the physical nature of this product, it is unlikely that ingestion will occur.
🚨 Immediate Medical Attention Required
If in doubt, get medical attention promptly. Get medical attention if symptoms are severe or persist (inhalation). Get medical attention if any discomfort continues (eye contact).
Medical Treatment
Treat symptomatically.
Related Chemical Substances & Alternative Products
Similar chemicals with comparable safety profiles and industrial applications
Technical Specifications & Material Properties
Physical state, chemical properties, melting point, boiling point, and material characteristics
Exposure Controls & Personal Protective Equipment (PPE)
Occupational exposure limits, engineering controls, and required safety equipment
🏭 Engineering Controls
Provide adequate ventilation. Observe any occupational exposure limits for the product or ingredients.
🧤 Hand Protection
To protect hands from chemicals, wear gloves that are proven to be impervious to the chemical and resist degradation. The most suitable glove should be chosen in consultation with the glove supplier/manufacturer, who can provide information about the breakthrough time of the glove material. Considering the data specified by the glove manufacturer, check during use that the gloves are retaining their protective properties and change them as soon as any deterioration is detected. Frequent changes are recommended.
👁️ Eye Protection
Unless the assessment indicates a higher degree of protection is required, the following protection should be worn: Tight-fitting safety glasses. Personal protective equipment that provides appropriate eye and face protection should be worn.
😷 Respiratory Protection
Ensure all respiratory protective equipment is suitable for its intended use and is 'UKCA'- marked. Check that the respirator fits tightly and the filter is changed regularly. Gas and combination filter cartridges suitable for intended use should be used. Full face mask respirators with replaceable filter cartridges suitable for intended use should be used. Half mask and quarter mask respirators with replaceable filter cartridges suitable for intended use should be used.
🦺 Skin/Body Protection
Wear appropriate clothing to prevent repeated or prolonged skin contact.
Transportation & Shipping Information
UN numbers, shipping names, transport classes, and regulatory transport requirements
🏷️ UN Number
1950
📦 Proper Shipping Name
AEROSOLS
⚠️ Transport Hazard Class
2.1
Chemical Safety FAQ & Common Questions
Most frequently asked questions about safety, handling, storage, and regulatory compliance
What is the hazard signal word for SAS8 SILICONE SPRAY 500ML?
The signal word for this substance is "danger".
What is the physical form of SAS8 SILICONE SPRAY 500ML?
SAS8 SILICONE SPRAY 500ML is a aerosol. appearing as aerosol. with colourless. color. It has organic solvents. odor.
What is SAS8 SILICONE SPRAY 500ML used for?
Universal lubricant. Silicone oil.
What are the hazard statements for SAS8 SILICONE SPRAY 500ML?
This substance has 5 hazard statements: H222: Extremely flammable aerosol. H229: Pressurised container: may burst if heated. H315: Causes skin irritation. H336: May cause drowsiness or dizziness. H411: Toxic to aquatic life with long lasting effects.