STAPA 4 n.l. Aluminium Paste

If unconscious, place in recovery position and seek medical advice. If symptoms persist, call a physician.

Wash off immediately with soap and plenty of water.

Immediately flush eye(s) with plenty of water. Remove contact lenses.

Keep respiratory tract clear. Do not give milk or alcoholic beverages. Never give anything by mouth to an unconscious person. If symptoms persist, call a physician.

Dry sand, Special powder against metal fire

Water, Foam, ABC powder, Carbon dioxide (CO2)

Standard procedure for chemical fires.

Evacuate personnel to safe areas. Use personal protective equipment. Remove all sources of ignition. Avoid dust formation.

The product should not be allowed to enter drains, water courses or the soil.

Use mechanical handling equipment. Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust). Sweep up and shovel.

Materials: sand, silica gel, acid binder, universal binder, sawdust

Keep away from heat and sources of ignition. Avoid dust formation. Ensure adequate ventilation. For personal protection see section 8. Smoking, eating and drinking should be prohibited in the application area.

Store in original container. Keep containers tightly closed in a cool, well-ventilated place. Keep container closed when not in use. Keep away from sources of ignition - No smoking. Electrical installations / working materials must comply with the technological safety standards. Protect from humidity and water. Do not allow to dry.

General industrial hygiene practice.

Keep away from open flames, hot surfaces and sources of fire and explosion ignition. Earthing of containers and apparatuses is essential. Normal measures for preventive fire protection.

Take note of the information given by the producer concerning permeability and break through times, and of special workplace conditions (mechanical strain, duration of contact). The exact break through time can be obtained from the protective glove producer and this has to be observed. Please observe the instructions regarding permeability and breakthrough time which are provided by the supplier of the gloves. Also take into consideration the specific local conditions under which the product is used, such as the danger of cuts, abrasion, and the contact time. The suitability for a specific workplace should be discussed with the producers of the protective gloves.

Use suitable breathing protection if workplace concentration requires.

Long sleeved clothing Safety shoes Choose body protection according to the amount and concentration of the dangerous substance at the work place.

No decomposition if stored and applied as directed.

No decomposition if stored and applied as directed.

Reacts with alkalis, acids, halogenes and oxidizing agents. Contact with acids and alkalis may release hydrogen. Mixture reacts slowly with water resulting in evolution of hydrogen. Vapour/air-mixtures are explosive at intense warming.

intense warming

alkalis, acids, halogenes and oxidizing agents

hydrogen