Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- MARKING SPRAY - 500 ml
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
general use marking paint
Uses advised against
do not use for products which come into contact with foodstuffs
Manufacturers & Suppliers
Nordwest Handel AG
manufacturer
Robert-Schuman-Str. 17, 44263 Dortmund, Germany
+49 (0)231 2222-3001
http://www.nordwest.com
Emergency Contacts
Vergiftungsinformationszentrale der Gesundheit
+43 1 406 43 43
Beratungsstelle bei Vergiftungen Giftinformationszentrale der Länder Rheinland-Pfalz und Hessen
+49(0)6131 / 19240
Tox Info Suisse
145
24h
Tox Info Suisse
+41 44 251 51 51
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| butane EC: 203-448-7 | 106-97-8 | 25 - 50% | Yes |
| Propan EC: 200-827-9 | 74-98-6 | 10 - 25% | Yes |
| ethyl acetate EC: 205-500-4 | 141-78-6 | 10 - 25% | Yes |
| Gemisch von i-, n- und cyclo-Aliphaten, überwiegend im Bereich C10-C12 EC: 927-241-2 | 64742-49-0 | 10 - 25% | Yes |
| Gemisch vo i-, n- und cyclo-Aliphaten, überwiegend im Bereich C10-C12 EC: 265-150-3 | 64742-49-0 | 5 - 10% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
If breathing is irregular or stopped, immediately seek medical assistance and start first aid actions. Provide fresh air.
Wash with plenty of soap and water. Take off contaminated clothing.
Remove contact lenses, if present and easy to do. Continue rinsing. Irrigate copiously with clean, fresh water for at least 10 minutes, holding the eyelids apart.
Rinse mouth with water (only if the person is conscious). Do NOT induce vomiting. In all cases of doubt, or when symptoms persist, seek medical advice.
Immediate Medical Attention
In all cases of doubt, or when symptoms persist, seek medical advice. If breathing is irregular or stopped, immediately seek medical assistance.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
water spray, BC-powder
water jet
Fight fire with normal precautions from a reasonable distance. Co-ordinate firefighting measures to the fire surroundings.
Firefighter Protection
In case of fire and/or explosion do not breathe fumes.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Remove persons to safety.
Keep away from drains, surface and ground water. Retain contaminated washing water and dispose of it.
Collect spillage (universal binder).
Materials: universal binder
Related Products
Similar products with comparable safety profiles
SILICONE SPRAY - 500 ML
UFI: HW23-H0RH-A00S-QTCA
Anreiss-Spray_Marking Spray
---
Motip Sprayplast 500ml
---
SAS470 SPRAY ADHESIVE 500ML
---
SAS46 CUTTING SPRAY 500ML
---
COLORMARK LINEMARKER YELLOW 500 ML
---
COLORMARK LINEMARKER WHITE 500 ML
---
COLORMARK LINEMARKER ORANGE 500 ML
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Use local and general ventilation. Use only in well-ventilated areas. Wash hands after use. Do not eat, drink and smoke in work areas. Remove contaminated clothing and protective equipment before entering eating areas. Never keep food or drink in the vicinity of chemicals. Never place chemicals in containers that are normally used for food or drink. Keep away from food, drink and animal feedingstuffs.
Protect from sunlight.
Wash hands after use. Do not eat, drink and smoke in work areas. Remove contaminated clothing and protective equipment before entering eating areas. Never keep food or drink in the vicinity of chemicals. Never place chemicals in containers that are normally used for food or drink. Keep away from food, drink and animal feedingstuffs.
Do not spray on an open flame or other ignition source.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
General ventilation.
Wear protective gloves. (Splash protection). Type of material: NR: natural rubber, latex, FKM: fluoro-elastomer. Breakthrough times of the glove material: >480 minutes (permeation: level 6)
Use protective eyewear to guard against splash of liquids.
In case of inadequate ventilation wear respiratory protection. Full face mask/half mask/quarter mask (EN 136/140). Type: AX-P2 (gas filters and combined filters against low-boiling point organic compounds and particles, colour code: Brown/White)
Take recovery periods for skin regeneration. Preventive skin protection (barrier creams/ointments) is recommended.
Use appropriate container to avoid environmental contamination.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
See below "Conditions to avoid".
The mixture contains reactive substance(s): risk of ignition
No known hazardous reactions.
Do not spray on an open flame or other ignition source. Keep away from heat. Protect from sunlight. high temperatures
oxidisers
Reasonably anticipated hazardous decomposition products produced as a result of use, storage, spill and heating are not known. Hazardous combustion products: see section 5.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1950
- Shipping Name
- AEROSOLS
- Transport Class
- 2
- Packing Group
- not assigned to a packing group
Provisions for dangerous goods (ADR) should be complied within the premises.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for MARKING SPRAY - 500 ml?
The signal word is danger.
What is the physical form of MARKING SPRAY - 500 ml?
MARKING SPRAY - 500 ml is a aerosol (spray aerosol) with different color. It has like esters odor.
What is the solubility of MARKING SPRAY - 500 ml?
not determined
What is MARKING SPRAY - 500 ml used for?
general use marking paint
What are the hazard statements for MARKING SPRAY - 500 ml?
This substance has 4 hazard statements:
- H222: Extremely flammable aerosol.
- H229: Pressurised container: May burst if heated.
- H319: Causes serious eye irritation.
- H336: May cause drowsiness or dizziness.
What is the melting point of MARKING SPRAY - 500 ml?
The melting point is not applicable (aerosol) and the boiling point is not applicable (aerosol).