NextSDS Logo
Safety Data Sheet EN

TALENS ACRYLIC VARNISH MATT 115 - AMSTERDAM ACRYLIC VARNISH MATT 115

Scan your chemical compliance

Free 10-second scan. Upload a document and check compliance instantly.

Scan Now
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
TALENS ACRYLIC VARNISH MATT 115 - AMSTERDAM ACRYLIC VARNISH MATT 115
Product Code
24285115, 24288115, 24308115, 24328115

Regulatory Identifiers

CAS Number
N/A
UFI Code
9030-G0CF-000E-UKD2

Identified Uses

Picture varnish

Manufacturers & Suppliers

R

Royal Talens

manufacturer

P.O.Box 4 NL-7300 AA Apeldoorn

+31 (0)55 5274700

Emergency Contacts

National Poisons Information Service (Birmingham)

(44) (0) 1215074123

National Poisons Information Centre (Dublin)

35 3 18379966

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Flam. Liq. Cat. 3 H226
Aquatic Chronic Cat. 2 H411
Skin Irrit. Cat. 2 H315
Eye Irrit. Cat. 2 H319
Skin Sens. Cat. 1 H317
STOT SE Cat. 3 H336

GHS Pictograms

GHS02 - Flammable

GHS02

GHS07 - Health hazard

GHS07

GHS09 - Environmental hazard

GHS09

Hazard Statements

H226 Flammable liquid and vapour.
H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H319 Causes serious eye irritation.
H336 May cause drowsiness or dizziness.
H411 Toxic to aquatic life with long lasting effects.

Precautionary Statements

P101 If medical advice is needed, have product container or label at hand.
P102 Keep out of reach of children.
P271 Use only outdoors or in a well-ventilated area.
P302+P352 IF ON SKIN: Wash with plenty of soap and water.
P501 Dispose of contents/container to hazardous waste collection point.

Manage your Safety Data Sheets

Organize and access chemical safety data with ease

Manage SDS
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

Mixture of substances listed below with non-hazardous additions.

Chemical Name CAS Number Concentration Hazardous
N/A --- 30 - 50% Yes
N/A --- 20 - 25% Yes
N/A --- 5 - 10% Yes

For the wording of the listed hazard phrases refer to section 16.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Supply fresh air; consult doctor in case of complaints.

Symptoms: Irritating to respiratory system; May cause drowsiness or dizziness.

Skin contact

Immediately wash with water and soap and rinse thoroughly.

Symptoms: Irritating to skin.

Eye contact

Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.

Ingestion

Do not induce vomiting; call for medical help immediately.

Symptoms: Headache; Nausea.

Immediate Medical Attention

call for medical help immediately (after swallowing). No further relevant information available.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

The data for this section has not been processed yet.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

The data for this section has not been processed yet.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

The data for this section has not been processed yet.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Not necessary if room is well-ventilated. Only during spraying without adequate removal by suction.

Hands

If prolonged or repeated contact is likely, chemical-resistant gloves are recommended. Material of gloves: Nitrile rubber, NBR. The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.

Eyes

Safety glasses if risk of splashes.

Respiratory

Not necessary if room is well-ventilated. Only during spraying without adequate removal by suction.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

State Under Standard Conditions
---
Ph
Not applicable.
Cloud Point
---
Decomposition Temperature
Not determined.
Colour
According to product specification
Solidification Point
---
Auto Ignition Temperature
270
Vapor Pressure
5.4 hPa
Bulk Density
---
Odor
Characteristic
Voc Content
---
Physical State Data
liquid
Relative Density
---
Solubility
---
Odor Threshold
---
Flammability
Not applicable.
Melting Point
Undetermined.
Appearance
---
Vapor Density
---
Boiling Point
154-193
Form
Fluid
Evaporation Rate
Not determined.
Freezing Point
Undetermined.
Crystallisation Point
---
Metal Corrosion
---
Upper Explosive Limit
6 Vol %
Molecular Weight
---
Relative Evaporation Rate
---
Partition Coefficient
Not determined.
Flash Point
24-36
Properties Status
---
Colour Intensity
---
Explosive Limits
---
Density
0.86 g/cm3
Solubility In Water
Not miscible or difficult to mix.
Physical State
---
Softening Point
---
Solubility In Fat
---
Lower Explosive Limit
0.7 Vol %
Kinematic Viscosity
>20.5 mm2/s
Dynamic Viscosity
Not determined.
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

The data for this section has not been processed yet.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
UN1263
Shipping Name
PAINT RELATED MATERIAL, ENVIRONMENTALLY HAZARDOUS
Transport Class
3 Flammable liquids.
Packing Group
III
ADR

Warning: Flammable liquids.

IMDG

Warning: Flammable liquids.

IATA

Warning: Flammable liquids.

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for TALENS ACRYLIC VARNISH MATT 115 - AMSTERDAM ACRYLIC VARNISH MATT 115?

The signal word is warning.

What is TALENS ACRYLIC VARNISH MATT 115 - AMSTERDAM ACRYLIC VARNISH MATT 115 used for?

Picture varnish

What are the hazard statements for TALENS ACRYLIC VARNISH MATT 115 - AMSTERDAM ACRYLIC VARNISH MATT 115?

This substance has 6 hazard statements:

  • H226: Flammable liquid and vapour.
  • H315: Causes skin irritation.
  • H317: May cause an allergic skin reaction.
  • H319: Causes serious eye irritation.
  • H336: May cause drowsiness or dizziness.
  • H411: Toxic to aquatic life with long lasting effects.

What is the melting point of TALENS ACRYLIC VARNISH MATT 115 - AMSTERDAM ACRYLIC VARNISH MATT 115?

The melting point is Undetermined. and the boiling point is 154-193.

Compliance Scanner

Scan your compliance