Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- DOLAPIX PC 67
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Auxiliary for the ceramic industry
Uses advised against
No further relevant information available.
Manufacturers & Suppliers
ZSCHIMMER & SCHWARZ GmbH & Co. KG CHEMISCHE FABRIKEN
manufacturer
Max-Schwarz-Str. 3-5, D-56112 Lahnstein/Rhein
+49 (0) 2621/12-0
Emergency Contacts
ZSCHIMMER & SCHWARZ GmbH & Co. KG
+49 (0) 2621/12-0
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Polycarboxylic acid, sodium salt
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Polycarboxylic acid, sodium salt | --- | --- | No |
not required
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove the casualty into fresh air and keep him calm.
In case of contact with skin wash off immediately with plenty of water.
In case of contact with eyes rinse thoroughly with plenty of water and seek medical advice.
Rinse out mouth and give plenty of water to drink. Summon a doctor immediately.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Appropriate engeneering controls
For permanent contact gloves made of the following materials are suitable (Permeation according to EN 374 Part 3: Level 6) : Nitrile rubber (NBR) gloves The exact penetration time must be obtained from the manufacturer of the protective gloves and has to be observed. The determination of penetration times according to EN 374 part III is not performed under practical conditions. Therefore a maximum wearing time, which corresponds to 50% of the penetration time, is recommended.
Eye protection (EN 166) goggles
not required
Skin protection (EN 465) protective clothing
Observe section 6 of the Safety Data Sheet. Observe section 7 of the Safety Data Sheet.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for DOLAPIX PC 67?
The signal word is no signal word.
What is the physical form of DOLAPIX PC 67?
DOLAPIX PC 67 is a liquid with yellow clear color. It has perceptible odor.
What is the solubility of DOLAPIX PC 67?
miscible
What is DOLAPIX PC 67 used for?
Auxiliary for the ceramic industry
What is the melting point of DOLAPIX PC 67?
The melting point is approx. - 5 and the boiling point is approx. 100.