PLIXXOPOL RC 4860C041

Remove to fresh air, keep patient warm and at rest. In case of persisting adverse effects consult a physician.

When in contact with the skin, clean with soap and water. Consult a doctor if skin irritation persists.

Remove contact lenses. Rinse eye thoroughly under running water keeping eyelids wide open and protecting the unaffected eye (at least 10 to 15 minutes). Seek medical assistance.

Rinse mouth thoroughly with water. Do not induce vomiting. Call a doctor immediately.

Carbon dioxide; Foam; Extinguishing powder; Fight larger fires with directed water spray.

High power water jet

In the event of fire, the following can be released: Carbon dioxide (CO2); Carbon monoxide (CO); Nitrogen oxides (NOx); Hydrogen cyanide (HCN)

Fight larger fires with directed water spray.

Refer to protective measures listed in sections 7 and 8.

Do not discharge into the drains/surface waters/groundwater. Do not discharge into the subsoil/soil.

Contain and collect spillage with non-combustible absorbent materials, e.g. sand, earth, vermiculite, diatomaceous earth and place in container for disposal according to local regulations (see section 13).

Materials: non-combustible absorbent materials, e.g. sand, earth, vermiculite, diatomaceous earth

Risks inherent to handling the product must be minimised by applying the appropriate protective and preventive measures. Working processes should - so far as possible, according to the state of the art - be designed to rule out bodily contact or the release of hazardous substances.

Keep container tightly closed and dry in a cool, well-ventilated place.

Do not eat, drink or smoke during work time. Keep away from foodstuffs and beverages. Do not inhale vapours. Avoid contact with eyes and skin. Wash hands before breaks and after work. Remove contaminated clothing and shoes and launder thoroughly before reusing.

Ensure adequate ventilation, local exhaust at the work station if necessary.

Sufficient protection is given wearing suitable protective gloves checked according to i.e. EN 374, in the event of risk of skin contact with the product. Check in any case suitability of protective glove for the specific workplace conditions (e.g. mechanical resistance, product compatibility, antistatic properties). Adhere to the manufacturer's instructions and information relating to the use, storage, care and replacement of protective gloves. Replace immediately protective gloves if worn or damaged. Appropriate Material: nitrile rubber, Material thickness: >= 0.35 mm

Safety glasses with side protection shield (EN 166)

If workplace exposure limits are exceeded, a respiration protection approved for this particular job must be worn. In case of aerosol, vapour and mist formation, take appropriate measures for breathing protection in the event workplace threshold values are not specified. Breathing apparatus: ABEK

Chemical-resistant work clothes.

No data available.

Stable under recommended storage and handling conditions (See section 7).

No data available.

Dangerous reactions are not to be expected when handling product according to its intended use.

No data available.

No data available.

None if stored, handled and transported properly.