PXL 7811

Remove the person affected from the area of exposure, provide clean air and keep at rest. Request medical attention if symptoms persist.

Clean the affected area thoroughly with water and neutral soap.

Symptoms: May cause an allergic skin reaction. Changes on the skin (stinging, redness, rashes, blisters).

Rinse eyes thoroughly with water for at least 15 minutes. If the injured person uses contact lenses, these should be removed unless they are stuck to the eyes, in which case removal could cause further damage. In all cases, after cleaning, a doctor should be consulted as quickly as possible with the SDS for the product.

Do not induce vomiting, but if it does happen keep the head down to avoid aspiration. Keep the person affected at rest. Rinse out the mouth and throat, as they may have been affected during ingestion.

If possible use polyvalent powder fire extinguishers (ABC powder), alternatively use foam or carbon dioxide extinguishers $(\mathrm{CO}_{2})$.

IT IS RECOMMENDED NOT to use full jet water as an extinguishing agent.

As a result of combustion or thermal decomposition reactive sub-products are created that can become highly toxic and, consequently, can present a serious health risk.

Act in accordance with the Internal Emergency Plan and the Information Sheets on actions to take after an accident or other emergencies. Eliminate all sources of ignition. In case of fire, cool the storage containers and tanks for products susceptible to combustion, explosion or BLEVE as a result of high temperatures.

Isolate leaks provided that there is no additional risk for the people performing this task. Evacuate the area and keep out those without protection.

Contain spillage using barriers or similar equipment. Use suitable absorbents for collection and treat the waste in accordance with current regulations.

If possible, contain spillage in open water using barriers or similar equipment. If this is not possible, try to control its spread and collect the product with suitable mechanical means. Always consult experts before using dispersants and make sure you have the necessary approvals if they are to be used. Treat the waste according to current regulations.

Avoid at all cost any type of spillage into an aqueous medium.

Absorb the spill using sand or inert absorbent and move it to a safe place. Collect the product in appropriate containers.

Materials: sand or inert absorbent

Comply with the current legislation concerning the prevention of industrial risks with regards manually handling weights. Maintain order, cleanliness and dispose of using safe methods. PREGNANT WOMEN SHOULD NOT BE EXPOSED TO THIS PRODUCT. Transfer in designated areas that comply with the necessary safety conditions (emergency showers and eyewash stations in close proximity), using personal protection equipment, especially on the hands and face. Limit manual transfers to small amounts only. Do not eat or drink during the process, washing hands afterwards with suitable cleaning products.

Avoid sources of heat, radiation, static electricity and contact with food.

Do not eat or drink during the process, washing hands afterwards with suitable cleaning products.

Avoid the evaporation of the product as it contains flammable substances, which could form flammable vapour/air mixtures in the presence of sources of ignition. Control sources of ignition (mobile phones, sparks,...) and transfer at slow speeds to avoid the creation of electrostatic charges.

NON-disposable chemical protective gloves (Material: Nitrile, Breakthrough time: >240 min, Thickness: 0.4 mm), CE CAT III, EN ISO 374-1:2016+A1:2018 EN 16523-1:2015+A1:2018 EN ISO 21420:2020. The Breakthrough Time indicated by the manufacturer must exceed the period during which the product is being used. Do not use protective creams after the product has come into contact with skin.

Face shield, CE CAT II, EN 166:2002 UNE-EN ISO 18526-1 al 4:2020 UNE-EN ISO 18526-1 al 4:2020 EN ISO 4007:2018. Clean daily and disinfect periodically according to the manufacturer's instructions. Use if there is a risk of splashing.

Filter mask for gases and vapours (Filter type: A), CE CAT III, EN 405:2002+A1:2010. Replace when there is a taste or smell of the contaminant inside the face mask. If the contaminant comes with warnings it is recommended to use isolation equipment.

Disposable clothing for protection against chemical risks, CE CAT III, EN 13034:2005+A1:2009 UNE-EN ISO 18526-1 al 4:2020 EN ISO 13982-1:2005/A1:2011 EN ISO 6529:2013 EN ISO 6530:2005 EN 464:1995. Safety footwear for protection against chemical risk, CE CAT III, EN ISO 20345:2022 EN 13832-1:2019.

To comply with environmental protection regulations, it is recommended to prevent any spillage of the product and its container.

Chemically stable under the indicated conditions of storage, handling and use.

No hazardous reactions are expected because the product is stable under recommended storage conditions.

Under the specified conditions, hazardous reactions that lead to excessive temperatures or pressure are not expected.

Shock and friction: Not applicable, Contact with air: Not applicable, Increase in temperature: Precaution, Sunlight: Precaution, Humidity: Not applicable.

Strong acids, oxidising materials, alkalis or strong bases

See sub section 10.3, 10.4 and 10.5 to find out the specific decomposition products. Depending on the decomposition conditions, complex mixtures of chemical substances can be released: carbon dioxide (CO₂), carbon monoxide and other organic compounds.

Consult the authorized waste service manager on the assessment and disposal operations in accordance with Annex 1 and Annex 2 (Directive 2008/98/EC).