Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Blasolube® 301 (Universal Grease)
- Product Code
- 00301-01
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
For industrial use, Lubricant, Lubricating grease
Manufacturers & Suppliers
BLASER SWISSLUBE AG
manufacturer
Winterseistrasse 22, CH-3415 Hasle-Rüegsau, Switzerland
+41 (0)34 460 01 01
JEMTECH (UK) Ltd.
distributor
Ashdown Business Park, Maresfield, East Sussex TN22 2DU, United Kingdom
+44 (0)1825 767640
http://www.jemtech.co.uk
Emergency Contacts
Emergency Contact
+44 1235 239670
24h/7d
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Hazard Statements
Precautionary Statements
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mixture of substances listed below with nonhazardous additions. Mineral oil containing lubricating grease with bentonite as thickener.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| N-1-naphtylaniline EC: 201-983-0 | --- | 0.5% | Yes |
| sodium nitrite EC: 231-555-9 | --- | 0.5% | Yes |
| Imidazoline - derivative EC: 202-414-9 | --- | 0.25% | Yes |
For the wording of the listed hazard phrases refer to section 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
Not applicable, as the concentrate is not volatile.
Rinse opened eye for several minutes under running water.
If symptoms persist consult doctor.
Immediate Medical Attention
No further relevant information available.
Medical Treatment
No further relevant information available.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No further data; see item 7.
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the resultant standard EN 374. The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. The break through, among others, depending on material density and the type of glove and therefore must be determined in each individual case. Gloves must be inspected prior to use. Replace when worn! Impervious gloves: nitrile rubber, minimum thickness of 0.3 mm. The exact breaktrough time has to be found out by the manufacturer of the protective gloves and has to be observed.
Eye protector with side protection (framed eyeglasses) EN 166.
Not required.
Protective work clothing
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- Not regulated
- Shipping Name
- Not regulated
- Transport Class
- Not regulated
- Packing Group
- Not regulated
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Blasolube® 301 (Universal Grease)?
The signal word is no signal word.
What is the physical form of Blasolube® 301 (Universal Grease)?
Blasolube® 301 (Universal Grease) is a pasty appearing as pasty light brown with light brown color. It has mineral-oil-like odor.
What is the solubility of Blasolube® 301 (Universal Grease)?
Insoluble.
What is Blasolube® 301 (Universal Grease) used for?
For industrial use, Lubricant, Lubricating grease
What are the hazard statements for Blasolube® 301 (Universal Grease)?
This substance has 1 hazard statement:
- H412: Harmful to aquatic life with long lasting effects.
What is the melting point of Blasolube® 301 (Universal Grease)?
The melting point is Not applicable and the boiling point is >300 (DIN 51751 / ASTM D86).