Product Identification & Regulatory Data
Official chemical identifiers, CAS numbers, and regulatory compliance information
Basic Product Information
Regulatory Identifiers
Chemical Abstracts Service registry number - unique identifier for chemical substances
Uses Information
Overview
Hempathane Topcoat 55219 Base commonly used consumer applications, industrial applications, used by spraying..
Manage Your Safety Data Sheets
Organize and access your chemical safety data with ease.
GHS Hazard Classification & Safety Warnings
Globally Harmonized System (GHS) hazard pictograms, signal words, and safety classifications
Classification Status
Signal Word
Hazard Classifications
GHS Hazard Pictograms & Safety Symbols
GHS02
GHS07
GHS09
GHS (Globally Harmonized System) pictograms indicate specific chemical hazard categories and safety precautions
Hazard Statements
- H226: Flammable liquid and vapor.
- H315: Causes skin irritation.
- H317: May cause an allergic skin reaction.
- H335: May cause respiratory irritation.
- H336: May cause drowsiness or dizziness.
- H411: Toxic to aquatic life with long lasting effects.
Precautionary Statements
- Keep out of reach of children.
- If medical advice is needed, have product container or label at hand.
- Wear protective gloves.
- Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
- Use only outdoors or in a well-ventilated area.
- Avoid release to the environment.
- Avoid breathing vapor.
- Wash thoroughly after handling.
- Collect spillage.
- IF INHALED: Call a POISON CENTER or doctor if you feel unwell.
- IF ON SKIN: Wash with plenty of water.
- If skin irritation or rash occurs: Get medical advice or attention.
- Take off contaminated clothing and wash it before reuse.
- Store locked up.
- Store in a well-ventilated place. Keep container tightly closed.
- Dispose of contents and container in accordance with all local, regional, national and international regulations.
Manufacturers & Suppliers
Authorized suppliers, manufacturers, and distribution network information
HEMPEL A/S
manufacturer
Lundtoftegrdsvej 91 DK-2800 Kgs. Lyngby Denmark
DK
24/7 Emergency Response
Critical emergency contact numbers for chemical spills, exposure incidents, and medical emergencies
Emergency Contact
+45 45 93 38 00
DK
08.00 - 17.00
See section 4 First aid measures.
Chemical Composition & Hazardous Ingredients
Detailed component analysis, concentration ranges, and hazardous substance identification
Product Type
mixtureChemical Components & Hazardous Substances
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Solvent naphtha (petroleum), light arom. EC: 918-668-5 | 128601-23-0 | 10-25% | Hazardous |
| Titanium dioxide (synthetic) EC: 236-675-5 | 13463-67-7 | 10-25% | Hazardous |
| XYLENE; MELANGE ISOMERES O,M,P EC: 215-535-7 | 1330-20-7 | 10-20% | Hazardous |
| ethylbenzene EC: 202-849-4 | 100-41-4 | 1-3% | Hazardous |
| 1,3,5-TRIMETHYLBENZENE, Mesitylene stof waarvoor binnen de Gemeenschap een blootstellingsgrens op de werkvloer geldt EC: 203-604-4 | 108-67-8 | 1-3% | Hazardous |
| 12-hydroxyoctadecanoic acid, reaction products with EC: 432-840-2 | N/A | 1-3% | Hazardous |
| 1,3-benzenedimethanamine and hexamethylenediamine EC: 432-840-2 | 220926-97-6 | Not specified | Hazardous |
| reactiemassa van bis(1,2,2,6,6-pentamethyl-4-piperidyl) sebacaat en methyl (1,2,2,6,6-pentamethyl-4-piperidyl) sebacaat EC: 915-687-0 | 1065336-91-5 | 1% | Hazardous |
| trimethylolpropane EC: 201-074-9 | 77-99-6 | 0.3% | Hazardous |
Additional Information
There are no additional ingredients present which, within the current knowledge of the supplier and in the concentrations applicable, are classified as hazardous to health or the environment and hence require reporting in this section.
Emergency First Aid Measures
Critical first aid procedures for chemical exposure incidents and medical emergencies
Inhalation Exposure
Remove to fresh air and keep at rest in a position comfortable for breathing. Give nothing by mouth. If not breathing, if breathing is irregular or if respiratory arrest occurs, provide artificial respiration or oxygen by trained personnel. If unconscious, place in recovery position and get medical attention immediately.
Symptoms:
Can cause central nervous system (CNS) depression. May cause drowsiness or dizziness. May cause respiratory irritation. Adverse symptoms may include the following: respiratory tract irritation coughing nausea or vomiting headache drowsiness/fatigue dizziness/vertigo unconsciousness
Skin Contact
Wash skin thoroughly with soap and water or use recognized skin cleanser. Do NOT use solvents or thinners. Remove contaminated clothing and shoes.
Symptoms:
Causes skin irritation. May cause an allergic skin reaction. Adverse symptoms may include the following: irritation redness
Eye Contact
Check for and remove any contact lenses. Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Seek immediate medical attention/advice.
Symptoms:
No known significant effects or critical hazards. Adverse symptoms may include the following: pain or irritation watering redness
Ingestion/Swallowing
If swallowed, seek medical advice immediately and show this container or label. Keep person warm and at rest. Do not induce vomiting unless directed to do so by medical personnel. Lower the head so that vomit will not re-enter the mouth and throat.
Symptoms:
Can cause central nervous system (CNS) depression. No specific data (for over-exposure signs/symptoms).
Immediate Medical Attention Required
In all cases of doubt, or when symptoms persist, seek medical attention. Seek immediate medical attention/advice (for eye contact). If swallowed, seek medical advice immediately. Contact poison treatment specialist immediately if large quantities have been ingested or inhaled.
Medical Treatment
Treat symptomatically. No specific treatment.
Related Chemical Substances & Alternative Products
Similar chemicals with comparable safety profiles and industrial applications
Technical Specifications & Material Properties
Physical state, chemical properties, melting point, boiling point, and material characteristics
Exposure Controls & Personal Protective Equipment
Occupational exposure limits, engineering controls, and required safety equipment
Engineering Controls
Arrange sufficient ventilation by local exhaust ventilation and good general ventilation to keep the airborne concentrations of vapors or dust lowest possible and below their respective threshold limit value. Ensure that eyewash stations and safety showers are proximal to the work-station location.
Hand Protection
Wear chemically resistant gloves (tested to EN374) in combination with 'basic' employee training. The quality of the chemical-resistant protective gloves must be chosen as a function of the specific workplace concentrations and quantity of hazardous substances. Since the actual work situation is unknown. Supplier of gloves should be contacted in order to find the appropriate type. Below listed glove(s) should be regarded as generic advice: Recommended: Silver Shield / Barrier / 4H gloves, polyvinyl alcohol (PVA), Viton May be used: nitrile rubber (>0.3 mm) Short term exposure: neoprene rubber (>0.1 mm), butyl rubber (>0.5 mm), natural rubber (latex) (>0.4 mm), polyvinyl chloride (PVC), nitrile rubber (>0.1 mm), butyl rubber (>0.3 mm)
Eye Protection
Safety eyewear complying with an approved standard should be used when a risk assessment indicates this is necessary to avoid exposure to liquid splashes, mists, gases or dusts. If contact is possible, the following protection should be worn, unless the assessment indicates a higher degree of protection: chemical splash goggles.
Respiratory Protection
When the product is applied by spraying and for continuous or prolonged work always wear an air-fed respirator e.g. hood with supply of fresh or compressed air or a full face, powered air purifying filter. Respirator selection must be based on known or anticipated exposure levels, the hazards of the product and the safe working limits of the selected respirator. If working areas have insufficient ventilation: When the product is applied by means that will not generate an aerosol such as, brush or roller wear half or totally covering mask equipped with gas filter of type A, when grinding use particle filter of type P. (EN140) Be sure to use an approved/certified respirator or equivalent.
Skin/Body Protection
Personal protective equipment for the body should be selected based on the task being performed and the risks involved handling this product. Wear suitable protective clothing. Always wear protective clothing when spraying.
Environmental Exposure Controls
Emissions from ventilation or work process equipment should be checked to ensure they comply with the requirements of environmental protection legislation. In some cases, fume scrubbers, filters or engineering modifications to the process equipment will be necessary to reduce emissions to acceptable levels.
Transportation & Shipping Information
UN numbers, shipping names, transport classes, and regulatory transport requirements
UN Number
UN1263
Proper Shipping Name
PAINT
Transport Hazard Class
3
Packing Group
III
IATA Air Transport Precautions
Transport within user's premises: always transport in closed containers that are upright and secure. Ensure that persons transporting the product know what to do in the event of an accident or spillage.
Chemical Safety FAQ & Common Questions
Most frequently asked questions about safety, handling, storage, and regulatory compliance
What is the hazard signal word for Hempathane Topcoat 55219 Base?
The signal word for this substance is "warning".
What is the physical form of Hempathane Topcoat 55219 Base?
Hempathane Topcoat 55219 Base is a liquid. with white color. It has solvent-like odor.
What is Hempathane Topcoat 55219 Base used for?
Consumer applications, Industrial applications, Used by spraying.
What are the hazard statements for Hempathane Topcoat 55219 Base?
This substance has 6 hazard statements: H226: Flammable liquid and vapor. H315: Causes skin irritation. H317: May cause an allergic skin reaction. H335: May cause respiratory irritation. H336: May cause drowsiness or dizziness. H411: Toxic to aquatic life with long lasting effects.
What is the melting point of Hempathane Topcoat 55219 Base?
The melting point is Testing not relevant or not possible due to nature of the product. .