Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LOCTITE SF 7840
- Synonyms
- Loctite 7840 5lt PL/RU/HU/HR
Regulatory Identifiers
- CAS Number
- N/A
- UFI Code
- Y5G7-SXF9-J20R-N0DE
Identified Uses
Epoxy adhesive
Manufacturers & Suppliers
Henkel AG & Co. KGaA
Henkelstr. 67 40589 Düsseldorf Germany
+49 211 797 0
www.mysds.henkel.com
Emergency Contacts
Henkel information service
+49-(0)211-797-3350
around-the-clock
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS08
GHS09
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 2,2'-[(1-methylethylidene)bis(4,1-phenyleneoxymethylene)]bisoxirane EC: 216-823-5 | 1675-54-3 | 25 - 50% | Yes |
| Neodecanoic acid, oxiranylmethyl ester EC: 247-979-2 | 26761-45-5 | 5 - 10% | Yes |
| RP Bisphenol F-epichlorohydrin resin, MW<=700 | 28064-14-4 | 1 - 5% | Yes |
| 4,4'-Isopropylidenediphenol EC: 201-245-8 | 80-05-7 | 0.1 - 0.3% | Yes |
Notes
If no ATE values are displayed, please refer to LD/LC50 values in Section 11. For full text of the H - statements and other abbreviations see section 16 "Other information".
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If symptoms persist, seek medical advice.
Rinse with running water and soap. Obtain medical attention if irritation persists.
Symptoms: Rash, Urticaria. Redness, inflammation.
Rinse immediately with plenty of running water (for 10 minutes), seek medical attention from a specialist.
Symptoms: Irritation, conjunctivitis.
Rinse mouth, drink 1-2 glasses of water, do not induce vomiting, consult a doctor.
Immediate Medical Attention
If symptoms persist (inhalation), seek medical advice. Obtain medical attention if irritation persists (skin). Seek medical attention from a specialist (eye). Consult a doctor (ingestion).
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
water, carbon dioxide, foam, powder
High pressure waterjet
In the event of a fire, carbon monoxide (CO), carbon dioxide (CO2) and nitrogen oxides (NOx) can be released.
In case of fire, keep containers cool with water spray.
Firefighter Protection
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Avoid contact with skin and eyes. Wear protective equipment. Ensure adequate ventilation.
For small spills wipe up with paper towel and place in container for disposal.
For large spills absorb onto inert absorbent material and place in sealed container for disposal.
Do not empty into drains / surface water / ground water.
wipe up with paper towel; absorb onto inert absorbent material
Materials: paper towel; inert absorbent material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid skin and eye contact. See advice in section 8
Ensure good ventilation/extraction. Refer to Technical Data Sheet.
Wash hands before work breaks and after finishing work. Do not eat, drink or smoke while working. Good industrial hygiene practices should be observed.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure good ventilation/extraction.
Chemical-resistant protective gloves (EN 374). Suitable materials for short-term contact or splashes (recommended: at least protection index 2, corresponding to > 30 minutes permeation time as per EN 374): nitrile rubber (NBR; >= 0.4 mm thickness) Suitable materials for longer, direct contact (recommended: protection index 6, corresponding to > 480 minutes permeation time as per EN 374): nitrile rubber (NBR; >= 0.4 mm thickness) This information is based on literature references and on information provided by glove manufacturers, or is derived by analogy with similar substances. Please note that in practice the working life of chemical-resistant protective gloves may be considerably shorter than the permeation time determined in accordance with EN 374 as a result of the many influencing factors (e.g. temperature). If signs of wear and tear are noticed then the gloves should be replaced.
Safety glasses with sideshields or chemical safety goggles should be worn if there is a risk of splashing. Protective eye equipment should conform to EN166.
Ensure adequate ventilation. An approved mask or respirator fitted with an organic vapour cartridge should be worn if the product is used in a poorly ventilated area Filter type: A (EN 14387)
Wear suitable protective clothing. Protective clothing should conform to EN 14605 for liquid splashes or to EN 13982 for dusts.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under recommended storage conditions.
Reacts with strong oxidants. Reaction with strong acids.
See section reactivity
Stable under normal conditions of storage and use.
See section reactivity.
carbon oxides.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose of in accordance with local and national regulations. Do not empty into drains / surface water / ground water.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3082
- Shipping Name
- ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S.
- Transport Class
- 9
- Packing Group
- III
not applicable
not applicable
not applicable
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is LOCTITE SF 7840 known by?
LOCTITE SF 7840 is also known as: Loctite 7840 5lt PL/RU/HU/HR
What is the hazard signal word for LOCTITE SF 7840?
The signal word is danger.
What is the physical form of LOCTITE SF 7840?
LOCTITE SF 7840 is a liquid with red color. It has mild odor.
What is the solubility of LOCTITE SF 7840?
Insoluble
What is LOCTITE SF 7840 used for?
Epoxy adhesive
What are the hazard statements for LOCTITE SF 7840?
This substance has 6 hazard statements:
- H315: Causes skin irritation.
- H317: May cause an allergic skin reaction.
- H319: Causes serious eye irritation.
- H341: Suspected of causing genetic defects.
- H361d: Suspected of damaging the unborn child.
- H411: Toxic to aquatic life with long lasting effects.
What is the melting point of LOCTITE SF 7840?
The melting point is Not applicable, Product is a liquid and the boiling point is > 148,9 °C (> 300 °F).