Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Zopiclone 1.0 mg/ml in Acetonitrile
- Product Code
- AMP0149.00-11
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Reference material for laboratory use only
Uses advised against
No further relevant information available.
Manufacturers & Suppliers
LGC Limited
manufacturer
Queens Road, Teddington, Middlesex TW11 0LY, UNITED KINGDOM
+44 (0) 20 8943 7000
http://www.lgcstandards.com
Emergency Contacts
Emergency Contact
+44 (0) 20 8943 7000
Monday - Friday : 8am - 5pm
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mixture: consisting of the following components.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Acetonitrile EC: 200-835-2 | 75-05-8 | 99% | Yes |
| Zopiclone EC: 256-138-9 | 43200-80-2 | 0.1% | Yes |
For the wording of the listed hazard phrases refer to section 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air. If required, provide artificial respiration. Keep patient warm. Consult doctor if symptoms persist. In case of unconsciousness place patient in recovery position for transport. Seek medical treatment.
Immediately wash with water and soap and rinse thoroughly. Seek medical treatment.
Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
Rinse mouth. Do not induce vomiting. Seek medical treatment.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
Water with full jet
Formation of toxic gases is possible during heating or in case of fire.
Firefighter Protection
Mouth respiratory protective device. Wear self-contained respiratory protective device.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Wear protective equipment. Keep unprotected persons away.
Do not allow to enter sewers/ surface or ground water.
Absorb with liquid-binding material
Materials: sand, diatomite, acid binders, universal binders, sawdust
Related Products
Similar products with comparable safety profiles
Zopiclone 1.0 mg/ml in Acetonitrile
UFI: HHEP-P03Q-U007-RT9D
Olanzapine 1.0 mg/ml in Acetonitrile
UFI: SJ3Q-P06Y-V00G-TF26
Nitrazepam (1.0 mg/ml) in Acetonitrile
---
Clozapine 1.0 mg/ml in Acetonitrile
---
Aripiprazole 1.0 mg/ml in Acetonitrile
---
Zaleplon 1.0 mg/ml in Methanol
---
7-Aminonitrazepam (1.0 mg/ml) in Acetonitrile
---
Oxazepam (1.0 mg/ml) in Methanol
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Ensure good ventilation/extraction at the workplace. Prevent formation of aerosols. Keep ignition sources away - Do not smoke. Protect against electrostatic charges.
Store in cool, dry place in tightly closed receptacles.
Keep ignition sources away - Do not smoke.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use self-contained respiratory protective device.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
Stable under normal conditions.
May form flammable/explosive vapour-air mixture.
Heating or in case of fire.
Strong oxidizing agents. Strong acids.
Formation of toxic gases is possible during heating or in case of fire.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
12.2 Persistence and degradability
No further relevant information available.
12.3 Bioaccumulative potential
No further relevant information available.
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
The substance is not considered to be PBT or vPvB.
12.6 Other adverse effects
No further relevant information available.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Must not be disposed of together with household garbage. Do not allow product to reach sewage system.
Must not be disposed of together with household garbage.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN1648
- Shipping Name
- ACETONITRILE mixture
- Transport Class
- 3 Flammable liquids.
- Packing Group
- II
Warning: Flammable liquids.
Warning: Flammable liquids.
Warning: Flammable liquids.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Zopiclone 1.0 mg/ml in Acetonitrile?
The signal word is danger.
What is Zopiclone 1.0 mg/ml in Acetonitrile used for?
Reference material for laboratory use only
What are the hazard statements for Zopiclone 1.0 mg/ml in Acetonitrile?
This substance has 3 hazard statements:
- H225: Highly flammable liquid and vapour.
- H302 + H312 + H332: Harmful if swallowed, in contact with skin or if inhaled.
- H319: Causes serious eye irritation.
What is the melting point of Zopiclone 1.0 mg/ml in Acetonitrile?
The melting point is -46 C and the boiling point is 81 C.