Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Nitrazepam (1.0 mg/ml) in Acetonitrile
- Product Code
- CERN-906
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Reference material for laboratory use only
Uses advised against
No further relevant information available.
Manufacturers & Suppliers
LGC Limited
manufacturer
Queens Road, Teddington, Middlesex TW11 0LY, UNITED KINGDOM
http://www.lgcstandards.com
Emergency Contacts
Emergency Contact
+44 (0) 20 8943 7000
Monday - Friday : 8am - 5pm
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air. If required, provide artificial respiration. Keep patient warm. Consult doctor if symptoms persist. In case of unconsciousness place patient in recovery position for transport.
Immediately wash with water and soap and rinse thoroughly.
Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
Rinse mouth. Do not induce vomiting. Call for a doctor immediately.
Immediate Medical Attention
Call for a doctor immediately.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO2, sand, extinguishing powder.
Water with full jet
Formation of toxic gases is possible during heating or in case of fire.
Firefighter Protection
Mouth respiratory protective device. Wear self-contained respiratory protective device.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Wear protective equipment. Keep unprotected persons away.
Inform respective authorities in case of seepage into water course or sewage system.
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust). Do not flush with water or aqueous cleansing agents
Related Products
Similar products with comparable safety profiles
7-Aminonitrazepam (1.0 mg/ml) in Acetonitrile
---
Zopiclone 1.0 mg/ml in Acetonitrile
---
7-Aminoflunitrazepam (1.0 mg/ml) in Acetonitrile
---
Flunitrazepam (1.0 mg/ml) in Methanol
---
Oxazepam (1.0 mg/ml) in Methanol
---
Clonazepam (1.0 mg/ml) in Methanol
---
Nordiazepam-D5 (1.0 mg/ml) in Methanol
---
Acetonitrile
CAS: 75-05-8
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Ensure good ventilation/extraction at the workplace. Prevent formation of aerosols.
Store in a cool, dry place in tightly closed receptacles. Store only in the original receptacle. Keep container in a well-ventilated place. Keep away from sources of ignition and heat. Store away from foodstuffs.
Keep ignition sources away - Do not smoke. Protect against electrostatic charges.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No further data; see item 7.
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. The protective gloves to be used must comply with the specifications of EC Directive 89/686/EEC and the related standard EN374. Material of gloves: Butyl rubber, BR. Penetration time of glove material: The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
Tightly sealed goggles
In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use self-contained respiratory protective device.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
Stable under normal conditions.
Forms explosive gas mixture with air.
Sources of ignition, Heat.
Strong oxidizing agents, Strong acids.
Formation of toxic gases is possible during heating or in case of fire.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Must not be disposed of together with household garbage.
Must not be disposed of together with household garbage. Do not allow product to reach sewage system.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1648
- Shipping Name
- ACETONITRILE, mixture
- Transport Class
- 3
- Packing Group
- II
Warning: Flammable liquids.
Warning: Flammable liquids.
Warning: Flammable liquids.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The substance is considered a controlled drug in some countries and needs to be treated according to the applicable regulations.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Nitrazepam (1.0 mg/ml) in Acetonitrile?
The signal word is danger.
What is the physical form of Nitrazepam (1.0 mg/ml) in Acetonitrile?
Nitrazepam (1.0 mg/ml) in Acetonitrile is a liquid with colourless color. It has aromatic odor.
What is Nitrazepam (1.0 mg/ml) in Acetonitrile used for?
Reference material for laboratory use only
What are the hazard statements for Nitrazepam (1.0 mg/ml) in Acetonitrile?
This substance has 3 hazard statements:
- H225: Highly flammable liquid and vapour.
- H302 + H312 + H332: Harmful if swallowed, in contact with skin or if inhaled.
- H319: Causes serious eye irritation.
What is the melting point of Nitrazepam (1.0 mg/ml) in Acetonitrile?
The melting point is -46 °C and the boiling point is 81 °C.