Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Sodium perchlorate monohydrate for analysis EMSURE®
- Product Code
- 1.06564
- Chemical Name
- Sodium perchlorate monohydrate
Regulatory Identifiers
- CAS Number
- 7791-07-3 Check regulations →
- REACH No.
- 01-2119540521-50-XXXX
Identified Uses
Reagent for analysis
Manufacturers & Suppliers
Merck Life Science BV/SRL
manufacturer
Brusselsesteenweg 288, B-3090 OVERIJSE
+32 (0)3 899-1301
Emergency Contacts
CHEMTREC
+(32) 28 083237
Anti-poison centre
070 245245
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS03
GHS07
GHS08
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Sodium perchlorate monohydrate EC: 231-511-9 | 7791-07-3 | 100% | Yes |
Notes
For the full text of the H-Statements mentioned in this Section, see Section 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
After inhalation: fresh air. Call in physician.
In case of skin contact: Take off immediately all contaminated clothing. Rinse skin with water/ shower. Consult a physician.
After eye contact: rinse out with plenty of water. Call in ophthalmologist. Remove contact lenses.
After swallowing: immediately make victim drink water (two glasses at most). Consult a physician.
Immediate Medical Attention
No data available
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
For this substance/mixture no limitations of extinguishing agents are given.
Not combustible. Has a fire-promoting effect due to release of oxygen. Ambient fire may liberate hazardous vapours.
Stay in danger area only with self-contained breathing apparatus. Prevent skin contact by keeping a safe distance or by wearing suitable protective clothing.
Firefighter Protection
Stay in danger area only with self-contained breathing apparatus. Prevent skin contact by keeping a safe distance or by wearing suitable protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Avoid inhalation of dusts. Avoid substance contact. Ensure adequate ventilation. Evacuate the danger area, observe emergency procedures, consult an expert.
Do not let product enter drains.
Take up dry. Clean up affected area.
Related Products
Similar products with comparable safety profiles
Sodium perchlorate monohydrate for analysis EMSURE®
CAS: 7791-07-3
Potassium perchlorate for analysis EMSURE® ACS
CAS: 7778-74-7
Sodium metaperiodate for analysis EMSURE® ACS,Reag. Ph Eur
CAS: 7790-28-5
Sodium chloride for analysis EMSURE® ACS,ISO,Reag. Ph Eur
CAS: 7647-14-5
Sodium chloride for analysis EMSURE® ACS,ISO,Reag. Ph Eur
CAS: 7647-14-5
di-Sodium oxalate for analysis EMSURE®
CAS: 62-76-0
Sodium thiosulfate pentahydrate for analysis EMSURE® ACS,ISO,Reag. Ph Eur
CAS: 10102-17-7
Sodium dihydrogen phosphate monohydrate for analysis EMSURE® ACS,Reag. Ph Eur
CAS: 10049-21-5
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Work under hood. Do not inhale substance/mixture.
Dry. Tightly closed. Separately or together with other oxidising substances only and away from sources of ignition and heat. Recommended storage temperature see product label.
Change contaminated clothing. Preventive skin protection recommended. Wash hands after working with substance.
Keep away from open flames, hot surfaces and sources of ignition.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Full contact and Splash contact: Material: Nitrile rubber, Minimum layer thickness: 0,11 mm, Break through time: 480 min, Material tested: KCL 741 Dermatril L. This recommendation applies only to the product stated in the safety data sheet, supplied by us and for the designated use. When dissolving in or mixing with other substances and under conditions deviating from those stated in EN 16523-1 please contact the supplier of CE-approved gloves (e.g. KCL GmbH).
Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU). Safety glasses.
Required when dusts are generated. Recommendations on filtering respiratory protection are based on DIN EN 143, DIN 14387 and other accompanying standards relating to the used respiratory protection system. Recommended Filter type: Filter type P2. The entrepreneur has to ensure that maintenance, cleaning and testing of respiratory protective devices are carried out according to the instructions of the producer. These measures have to be properly documented.
protective clothing
Do not let product enter drains.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is chemically stable under standard ambient conditions (room temperature).
No data available
Risk of ignition or formation of inflammable gases or vapours with: Light metals, Organic Substances, Metals, Alcohols, Fluorine, Halogenated hydrocarbon, semimetallic oxides, Polyvinylchloride, sulfur, acids. Violent reactions possible with: Cyanides. Risk of explosion with: ammonium compounds, Reducing agents, magnesium, Powdered metals, combustible substances.
no information available
Iron, Mild steel
In the event of fire: see section 5
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
12.2 Persistence and degradability
Not applicable for inorganic substances
12.3 Bioaccumulative potential
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
The substance/mixture does not contain components considered to be PBT or vPvB at levels of 0.1% or higher.
12.6 Endocrine disrupting properties
The substance/mixture does not contain components considered to have endocrine disrupting properties at levels of 0.1% or higher.
12.7 Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
No data available
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1502
- Shipping Name
- SODIUM PERCHLORATE
- Transport Class
- 5.1
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
This material safety data sheet complies with the requirements of Regulation (EC) No. 1907/2006.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Sodium perchlorate monohydrate for analysis EMSURE®?
The signal word is danger.
What is the physical form of Sodium perchlorate monohydrate for analysis EMSURE®?
Sodium perchlorate monohydrate for analysis EMSURE® is a crystals with colourless color. It has odourless odor.
What is Sodium perchlorate monohydrate for analysis EMSURE® used for?
Reagent for analysis
What are the hazard statements for Sodium perchlorate monohydrate for analysis EMSURE®?
This substance has 4 hazard statements:
- H271: May cause fire or explosion; strong oxidizer.
- H302: Harmful if swallowed.
- H319: Causes serious eye irritation.
- H373: May cause damage to organs (Thyroid) through prolonged or repeated exposure.
What is the melting point of Sodium perchlorate monohydrate for analysis EMSURE®?
The melting point is 471,8 C and the boiling point is No data available.