Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Sodium perchlorate monohydrate for analysis EMSURE
- Product Code
- 106564
- Chemical Name
- Sodium perchlorate monohydrate
Regulatory Identifiers
- CAS Number
- 7791-07-3 Check regulations →
Identified Uses
Reagent for analysis
Manufacturers & Suppliers
Merck KGaA
64271 Darmstadt, Germany
+49 6151 72-0
www.merckgroup.com
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS03
GHS07
Hazard Statements
Precautionary Statements
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Formula NaClO*HO ClNaO * HO (Hill) Molar mass 140,46 g/mol
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Sodium perchlorate monohydrate EC: 231-511-9 | 7791-07-3 | 100% | Yes |
Notes
For the full text of the H-Statements mentioned in this Section, see Section 16. For the full text of the R-phrases mentioned in this Section, see Section 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
fresh air.
Symptoms: Shortness of breath, muscular weakness
Take off immediately all contaminated clothing. Rinse skin with water/ shower.
Symptoms: irritant effects
rinse out with plenty of water.
Symptoms: irritant effects
immediately make victim drink water (two glasses at most). Consult a physician.
Symptoms: irritant effects
Immediate Medical Attention
No information available.
Medical Treatment
No information available.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
Sodium perchlorate monohydrate for analysis EMSURE
CAS: 7791-07-3
Strontium chloride hexahydrate for analysis EMSURE ACS
CAS: 10025-70-4
Sodium carbonate anhydrous for analysis EMSURE® ISO
CAS: 497-19-8
Ammonium nitrate for analysis EMSURE® ACS
CAS: 6484-52-2
Sodium perchlorate, anhydrous
CAS: 7601-89-0
Potassium dichromate for analysis EMSURE ACS,ISO,Reag. Ph Eur
CAS: 7778-50-9
Sodium hydrogen carbonate for analysis EMSURE ACS,Reag.Ph Eur
CAS: 144-55-8
Magnesium oxide for analysis EMSURE
CAS: 1309-48-4
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Technical measures and appropriate working operations should be given priority over the use of personal protective equipment. See section 7.1.
full contact: Glove material: Nitrile rubber Glove thickness: 0,11 mm Break through time: - 480 min splash contact: Glove material: Nitrile rubber Glove thickness: 0,11 mm Break through time: - 480 min The protective gloves to be used must comply with the specifications of EC Directive 89/686/EEC and the related standard EN374, for example KCL 741 Dermatril L (full contact), KCL 741 Dermatril L (splash contact). The breakthrough times stated above were determined by KCL in laboratory tests acc. to EN374 with samples of the recommended glove types. This recommendation applies only to the product stated in the safety data sheet, supplied by us and for the designated use. When dissolving in or mixing with other substances and under conditions deviating from those stated in EN374 please contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de).
Safety glasses
required when dusts are generated. Recommended Filter type: Filter P 2 (acc. to DIN 3181) for solid and liquid particles of harmful substances The entrepeneur has to ensure that maintenance, cleaning and testing of respiratory protective devices are carried out according to the instructions of the producer. These measures have to be properly documented.
protective clothing
Do not let product enter drains.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN 1502
- Shipping Name
- SODIUM PERCHLORATE
- Transport Class
- 5.1
- Packing Group
- II
yes
yes
no
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Sodium perchlorate monohydrate for analysis EMSURE?
The signal word is danger.
What is the physical form of Sodium perchlorate monohydrate for analysis EMSURE?
Sodium perchlorate monohydrate for analysis EMSURE is a crystals with colourless color. It has odourless odor.
What is Sodium perchlorate monohydrate for analysis EMSURE used for?
Reagent for analysis
What are the hazard statements for Sodium perchlorate monohydrate for analysis EMSURE?
This substance has 2 hazard statements:
- H271: May cause fire or explosion; strong oxidizer.
- H302: Harmful if swallowed.
What is the melting point of Sodium perchlorate monohydrate for analysis EMSURE?
The melting point is 130 C and the boiling point is No information available..