NextSDS Logo
Safety Data Sheet EN

Lumipulse G -Amyloid 1-42 Plasma IRC, Particle solution

Scan your chemical compliance

Free 10-second scan. Upload a document and check compliance instantly.

Scan Now
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Lumipulse G -Amyloid 1-42 Plasma IRC, Particle solution
Product Code
59676, 59762

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Laboratory use. For product use see insert.

Uses advised against

Not to be used for any purpose other than those mentioned below.

Manufacturers & Suppliers

F

FUJIREBIO EUROPE N.V.

manufacturer

Technologiepark 6, 9052 Gent, Belgium

Emergency Contacts

Fujirebio Europe N.V.

+32-9-329-13-29

Mon - Fri 9:00am to 5:30pm

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Skin Sens. Cat. 1 H317
Aquatic Chronic Cat. 3 H412

GHS Pictograms

GHS07 - Health hazard

GHS07

Hazard Statements

H317 May cause an allergic skin reaction.
H412 Harmful to aquatic life with long lasting effects.

Precautionary Statements

P273 Avoid release to the environment.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P302+P352 IF ON SKIN: Wash with plenty of soap and water.
P333+P313 If skin irritation or rash occurs: Get medical advice/attention.
P362+P364 Take off contaminated clothing and wash it before reuse.

Manage your Safety Data Sheets

Organize and access chemical safety data with ease

Manage SDS
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
N/A --- --- Yes
N/A --- --- Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Supply fresh air; consult doctor in case of complaints.

Skin contact

Immediately wash with water and soap and rinse thoroughly. If skin irritation continues, consult a doctor.

Eye contact

Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.

Ingestion

Do not induce vomiting; call for medical help immediately.

Immediate Medical Attention

No further relevant information available.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

The data for this section has not been processed yet.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

The data for this section has not been processed yet.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

The data for this section has not been processed yet.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

No further data; see item 7.

Hands

Wear protective gloves in order to be protected against chemical risks according to EN 420 and EN 374. The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation consisting of different substances, no specific information can be given about breakthrough times. The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be observed. As protection from splashes gloves made of the following materials are suitable: Nitrile rubber, NBR. Recommended thickness of the material: 0.11 mm

Eyes

Wear safety glasses in order to protect your eyes against chemical splashes according to EN 166.

Respiratory

Not necessary if room is well-ventilated.

Skin/Body

Wear a laboratory coat for your protection against chemical splashes according to EN 340 and EN 369.

Environmental

Comply with the current local and national environmental regulations.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Fluid
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
---
Colour
Brownish-red
Colour Intensity
---
Form
Fluid
Odor
Not determined.
Odor Threshold
Not determined.
Ph
6
Melting Point
Undetermined.
Boiling Point
Undetermined.
Flash Point
Not applicable.
Freezing Point
Undetermined.
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
Not determined.
Vapor Pressure
Not determined.
Vapor Density
Not determined.
Relative Density
Not determined.
Bulk Density
---
Density
Not determined.
Flammability
Product is not flammable.
Upper Explosive Limit
Not determined.
Lower Explosive Limit
Not determined.
Explosive Limits
---
Auto Ignition Temperature
Not determined.
Decomposition Temperature
Not determined.
Solubility
---
Partition Coefficient
Not determined.
Solubility In Water
Soluble.
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
void
Dynamic Viscosity
Not determined.
Kinematic Viscosity
Not determined.
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

The data for this section has not been processed yet.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
void
Shipping Name
void
Transport Class
void
Packing Group
void
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Lumipulse G -Amyloid 1-42 Plasma IRC, Particle solution?

The signal word is warning.

What is the physical form of Lumipulse G -Amyloid 1-42 Plasma IRC, Particle solution?

Lumipulse G -Amyloid 1-42 Plasma IRC, Particle solution is a fluid with brownish-red color. It has not determined. odor.

What is Lumipulse G -Amyloid 1-42 Plasma IRC, Particle solution used for?

Laboratory use. For product use see insert.

What are the hazard statements for Lumipulse G -Amyloid 1-42 Plasma IRC, Particle solution?

This substance has 2 hazard statements:

  • H317: May cause an allergic skin reaction.
  • H412: Harmful to aquatic life with long lasting effects.

What is the melting point of Lumipulse G -Amyloid 1-42 Plasma IRC, Particle solution?

The melting point is Undetermined. and the boiling point is Undetermined..

Compliance Scanner

Scan your compliance