Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Lumipulse G β-Amyloid 1-40 Plasma, Particle solution
- Product Code
- 59696, 59826
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Laboratory use. For product use see insert.
Uses advised against
Not to be used for any purpose other than those mentioned below.
Manufacturers & Suppliers
FUJIREBIO EUROPE N.V.
manufacturer
Technologiepark 6, 9052 Gent, Belgium
+32-9-329-13-29
Emergency Contacts
Fujirebio Europe N.V.
+32-9-329-13-29
Mon - Fri 9:00am to 5:30pm
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 4-morpholineethanesulfonic acid, monohydrate EC: 224-632-3 | 145224-94-8 | 2.5% | Yes |
| reaction mass of: 5-chloro-2-methyl-4-isothiazolin-3-one [EC no. 247-500-7] and 2-methyl-2H-isothiazol-3-one [EC no. 220-239-6] (3:1) | 55965-84-9 | 0.0025 - 0.025% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air; consult doctor in case of complaints.
Immediately wash with water and soap and rinse thoroughly. If skin irritation continues, consult a doctor.
Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
Do not induce vomiting; call for medical help immediately.
Immediate Medical Attention
Call for medical help immediately.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO2, powder or water spray. Fight larger fires with water spray. Use fire extinguishing methods suitable to surrounding conditions.
Firefighter Protection
No special measures required.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Wear protective equipment. Keep unprotected persons away. See section 8 (Measurements for the control of exposure / personal protection).
Do not allow product to reach sewage system or any water course.
Absorb liquid components with liquid-binding material.
Materials: liquid-binding material
Related Products
Similar products with comparable safety profiles
Lumipulse G β-Amyloid 1-42 Plasma IRC, Particle solution
---
Lumipulse G β-Amyloid 1-40 Plasma, Calibrators (CAL 1, CAL 2, CAL 3, CAL 4, CAL 5)
---
Lumipulse β-Amyloid Plasma Controls (L 1, L 2)
---
Lumipulse G pTau 181 Immunoreaction Cartridges : Antibody-Coated Particle Solution
---
Lumipulse G NfL CSF IRC, Particle solution
---
Lumipulse G NfL Blood IRC, Particle solution
---
Lumipulse G pTau 217 Plasma CAL
---
Lumipulse G GFAP Calibrators set: Calibrators (after reconstitution)
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
No special precautions are necessary if used correctly.
Store in a dry and well-ventilated area in the closed original packaging. Respect the expiry date and the additional instruction given in the package insert.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No further data; see item 7.
Wear protective gloves in order to be protected against chemical risks according to EN 420 and EN 374. Material of gloves: The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. Penetration time of glove material: As the product is a preparation consisting of different substances, no specific information can be given about breakthrough times. The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be observed. As protection from splashes gloves made of the following materials are suitable: Nitrile rubber, NBR. Recommended thickness of the material: 0.11 mm
Wear safety glasses in order to protect your eyes against chemical splashes according to EN 166.
Not necessary if room is well-ventilated.
Wear a laboratory coat for your protection against chemical splashes according to EN 340 and EN 369.
Comply with the current local and national environmental regulations.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No further relevant information available.
No further relevant information available.
No dangerous reactions known.
No decomposition if used according to specifications.
No further relevant information available.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Lumipulse G β-Amyloid 1-40 Plasma, Particle solution?
The signal word is warning.
What is the physical form of Lumipulse G β-Amyloid 1-40 Plasma, Particle solution?
Lumipulse G β-Amyloid 1-40 Plasma, Particle solution is a fluid with brownish-red color. It has not determined. odor.
What is Lumipulse G β-Amyloid 1-40 Plasma, Particle solution used for?
Laboratory use. For product use see insert.
What are the hazard statements for Lumipulse G β-Amyloid 1-40 Plasma, Particle solution?
This substance has 2 hazard statements:
- H317: May cause an allergic skin reaction.
- H412: Harmful to aquatic life with long lasting effects.
What is the melting point of Lumipulse G β-Amyloid 1-40 Plasma, Particle solution?
The melting point is Undetermined. and the boiling point is Undetermined..