Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- ISE Diluent Gen.2
- Product Code
- 04880480190
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
For professional users only.
Manufacturers & Suppliers
Roche Diagnostics Limited
manufacturer
Charles Avenue, Burgess Hill, RH15 9RY West Sussex, United Kingdom
+44 1444 256000
Emergency Contacts
Roche Diagnostics Ltd. (Health, Safety & Environment)
+44 1444 256500
Roche Diagnostics Ltd. (Health, Safety & Environment)
+44 7802 260498
Roche Diagnostics Ltd. (Product Safety / Vigilance)
+44 1444 256561
Roche Diagnostics Ltd. (Product Safety / Vigilance)
+44 7710 391653
NPIS
+44 844 892 0111
NHS Direct
+44 845 4647
NHS 24
+44 8454 242424
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| reaction mass of 5-chloro-2-methyl-2H-isothiazol-3-one and 2-methyl-2H-isothiazol-3-one (3:1) | 55965-84-9 | 0.0002 - 0.0015% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If unconscious, place in recovery position and seek medical advice. If symptoms persist, call a physician.
If on skin, rinse well with water.
Immediately flush eye(s) with plenty of water. Remove contact lenses. Protect unharmed eye. If eye irritation persists, consult a specialist.
Keep respiratory tract clear. Do not give milk or alcoholic beverages. Never give anything by mouth to an unconscious person. If symptoms persist, call a physician. Rinse mouth with water.
Medical Treatment
The first aid procedure should be established in consultation with the doctor responsible for industrial medicine.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
No information available.
Standard procedure for chemical fires.
Firefighter Protection
Wear self-contained breathing apparatus for firefighting if necessary.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Refer to protective measures listed in sections 7 and 8.
Local authorities should be advised if significant spillages cannot be contained.
Wipe up with absorbent material (e.g. cloth, fleece).
Materials: absorbent material (e.g. cloth, fleece)
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
For personal protection see section 8. Smoking, eating and drinking should be prohibited in the application area.
See label, package insert or internal guidelines. No decomposition if stored and applied as directed.
Handle in accordance with good industrial hygiene and safety practice.
Normal measures for preventive fire protection.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No data available
Material: In case of contact through splashing: Nitrile rubber, Break through time: > 30 min, Glove thickness: > 0,11 mm. Material: In case of full contact: butyl-rubber, Break through time: > 480 min, Glove thickness: > 0,4 mm. The selected protective gloves have to satisfy the specifications of Regulation (EU) 2016/425 and the standard EN 374.
Safety glasses. Use eye protection according to EN 166.
No personal respiratory protective equipment normally required.
Protective suit
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
No dangerous reaction known under conditions of normal use.
Stable under recommended storage conditions. No hazards to be specially mentioned.
No data available
No data available
No data available
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Can be disposed as waste water, when in compliance with local regulations.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
EUH210: Safety data sheet available on request. EUH208: Contains Mixture of: 5-chloro-2-methyl-4-isothiazolin-3-one and 2-methyl-2H-isothiazol-3-one (3:1). May produce an allergic reaction.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for ISE Diluent Gen.2?
The signal word is no signal word.
What is the physical form of ISE Diluent Gen.2?
ISE Diluent Gen.2 is a liquid with no data available color. It has no data available odor.
What is ISE Diluent Gen.2 used for?
For professional users only.
What is the melting point of ISE Diluent Gen.2?
The melting point is No data available and the boiling point is No data available.