Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- MicroVue C1-Inhibitor Plus EIA kit
- Product Code
- A037
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
The MicroVue C1-Inhibitor Plus Enzyme Immunoassay (EIA) measures the amount of functional C1-Inhibitor protein in human plasma or serum. This kit is for In Vitro Diagnostic use.
Manufacturers & Suppliers
Quidel Corporation
manufacturer
2005 East State Street, Suite 100, Athens, OH 45701
1.800.874.1517
http://quidel.com
Emergency Contacts
Quidel Corporation
1.866.519.4752
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Hydrochloric Acid EC: 231-595-7 | 7647-01-0 | 4% | No |
| Hydrogen Peroxide EC: 231-765-0 | 7722-84-1 | 0.1% | No |
| 1-Ethyl-2-Pyrrolidnone (NEP) EC: 220-250-6 | 2687-91-4 | 1 - 5% | No |
| Acetone EC: 200-662-2 | 67-64-1 | 1 - 10% | No |
| 5-Chloro-2-methyl-2, 3-dihydroisothiazol-3-one; 2-Methyl-2, 3-dihydroisothiazol-3-one (3:1) | 55965-84-9 | 0.035% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move the person to fresh air and support breathing as required.
Wash affected area with soap and water. Seek medical advice if irritation develops.
Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists, get medical attention.
Never give anything by mouth to an unconscious person. Rinse mouth with water (do not swallow). Seek medical advice if irritation develops. TMB Substrate or Stop Solution: Do not induce vomiting.
Immediate Medical Attention
Consult a physician.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
For small fires, use dry chemical, water spray, carbon dioxide or alcohol-resistant foam.
The components within this kit will not significantly contribute to the intensity of a fire.
Only individuals properly trained and issued appropriate personal protective equipment should respond and attempt to extinguish a fire.
Firefighter Protection
Firefighters should wear full protective gear when responding to fires.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Only individuals properly trained and issued appropriate personal protective equipment should respond and attempt to clean up a spill or release.
Wipe up with inert absorbent material (e.g., paper towel, etc.). Thoroughly wash the area with soap and water after a spill or release clean-up.
Contain spill to prevent migration to drains, sewers or open water sources. Discharge into the environment must be avoided.
Wipe up with inert absorbent material (e.g., paper towel, etc.). Thoroughly wash the area with soap and water after a spill or release clean-up.
Materials: inert absorbent material (e.g., paper towel, etc.)
Related Products
Similar products with comparable safety profiles
CircuLex Human Chitotriosidase ELISA Kit
---
EpiScreen Plus™
---
Human CD93/C1qR EZ-Set™ ELISA Kit (DIY Antibody Pairs)
---
Human CTRP9 EZ-Set™ ELISA Kit (DIY Antibody Pairs)
---
3M™ Attest™ Super Rapid Readout Biological Indicator 1491 & 1492V
---
3M™ Attest™ 1292E Rapid Readout Biological Indicator
---
ImmPACT™ DAB Peroxidase Substrate Kit
---
Bovine IGF-1 EZ-Set™ ELISA Kit (DIY Antibody Pairs)
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
As with all chemical and biological substances, avoid getting the components within this kit ON YOU or IN YOU. Wash exposed areas thoroughly after using this kit. Do not eat or drink while using this kit. This kit should be handled only by qualified clinical or laboratory employees trained on the use of this kit and who are familiar with the potential hazards. Universal Precautions should be followed when handling and working with this kit. Keep out of reach of the general public.
To maintain efficacy, store according to the kit specific Package Insert instructions.
Wash exposed areas thoroughly after using this kit. Do not eat or drink while using this kit. Always wash hands thoroughly after handling the components within this kit.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Use with adequate ventilation.
Handle with appropriately rated chemical resistant gloves. Gloves should be inspected prior to use. Use proper glove technique to remove gloves to avoid contact with skin. Wash hands after handling the components within this kit.
Wear safety glasses with side shields or goggles to prevent eye contact.
None needed under normal conditions of use.
Use body protection appropriate for the task. A laboratory coat is recommended.
No special environmental controls are required.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable
No data available
No data available
No data available
No data available
No data available
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose of waste materials, unused components and contaminated packaging in compliance with country, federal, state and local regulations.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Safety, Health and Environmental regulations/legislation specific for the mixture: European Union – Regulation (EC) No. 1907/2006
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for MicroVue C1-Inhibitor Plus EIA kit?
The signal word is danger.
What is the physical form of MicroVue C1-Inhibitor Plus EIA kit?
MicroVue C1-Inhibitor Plus EIA kit is a liquid appearing as clear liquid, mild odor; clear liquid, odorless; slightly brown liquid, odorless . It has mild odor; odorless odor.
What is MicroVue C1-Inhibitor Plus EIA kit used for?
The MicroVue C1-Inhibitor Plus Enzyme Immunoassay (EIA) measures the amount of functional C1-Inhibitor protein in human plasma or serum. This kit is for In Vitro Diagnostic use.
What are the hazard statements for MicroVue C1-Inhibitor Plus EIA kit?
This substance has 5 hazard statements:
- H315: Causes skin irritation.
- H317: May cause an allergic skin reaction.
- H319: Causes serious eye irritation.
- H336: May cause dizziness or drowsiness.
- H360: May damage fertility or the unborn child.
What is the melting point of MicroVue C1-Inhibitor Plus EIA kit?
The melting point is No data available and the boiling point is No data available.