Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Formaldehyde oplossing 4%
- Product Code
- KP4078
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
For Laboratory, Research or Manufacturing use.
Uses advised against
No further relevant information available.
Manufacturers & Suppliers
Avantor Performance Materials B.V.
manufacturer
P.O.Box 1, 7400 AA Deventer, The Netherlands
(+31) (0)570 - 687500
Emergency Contacts
Environment Health & Safety department
(+31)(0) 570 687500
during normal opening times (8 am till 5.30 pm)
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air and call for doctor for safety reasons. In case of unconsciousness bring patient into stable side position for transport.
If skin irritation continues, consult a doctor. Instantly wash with water and soap and rinse thoroughly.
Rinse opened eye for several minutes under running water.
Rinse out mouth and then drink plenty of water. Seek medical treatment. Instantly call for doctor.
Immediate Medical Attention
Seek medical treatment. Instantly call for doctor.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO2, extinguishing powder or water jet. Fight larger fires with water jet or alcohol-resistant foam.
Water with a full water jet.
No further relevant information available.
Firefighter Protection
Wear self-contained breathing apparatus. Put on breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
No special measures required.
Absorb with liquid-binding material
Materials: sand, diatomite, acid binders, universal binders, sawdust
Related Products
Similar products with comparable safety profiles
Formaldehyde 4% aqueous solution, buffered Q path® Formalin 10%
CAS: 50-00-0
Formaldehyde Solution, 36%, For Histology, Glassware Washing and other General Applications
---
Formaldehyde solution about 37% stabilized with about 10% methanol Ph Eur,BP,USP
---
Formaldehyde solution min. 37% free from acid stabilized with about 10% methanol and calcium carbonate for histology
---
Formaldehyde
---
FORMALDEHYDE 40% SOLUTION
CAS: 50-00-0
Formaldehyde-2,4-dinitrophenylhydrazone 1000 µg/mL in Acetonitrile
UFI: UX49-Y0AX-200E-CG2D
Formaldehyde in Methanol
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Work only in fume cupboard. Ensure good ventilation/exhaustion at the workplace. Prevent formation of aerosols.
Keep container tightly sealed.
no special requirements
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Protective gloves. The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application. The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be observed.
Safety glasses recommended during refilling.
In case of brief exposure or low pollution use breathing filter apparatus. In case of intensive or longer exposure use breathing apparatus that is independent of circulating air.
Protective work clothing.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Reaction with hydrochloric acid forming Dichlorodimethylether
Heat, boiling temperatures. No further relevant information available.
No further relevant information available.
No dangerous decomposition products known
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Must not be disposed of together with household garbage. Do not allow product to reach sewage system.
Must not be disposed of together with household garbage.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- Void
- Shipping Name
- Void
- Transport Class
- Void
- Packing Group
- Void
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The product is classified and labelled according to the CLP regulation.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Formaldehyde oplossing 4%?
The signal word is danger.
What is the physical form of Formaldehyde oplossing 4%?
Formaldehyde oplossing 4% is a fluid appearing as form: fluid, colour: colourless, smell: like aldehyde with colourless color. It has like aldehyde odor.
What is Formaldehyde oplossing 4% used for?
For Laboratory, Research or Manufacturing use.
What are the hazard statements for Formaldehyde oplossing 4%?
This substance has 3 hazard statements:
- H317: May cause an allergic skin reaction.
- H341: Suspected of causing genetic defects.
- H350: May cause cancer.
What is the melting point of Formaldehyde oplossing 4%?
The melting point is 0 °C and the boiling point is 100 °C.