Formaldehyde 4% aqueous solution, buffered Q path® Formalin 10%

Call a POISON CENTRE/doctor. Remove casualty to fresh air and keep warm and at rest. If breathing is irregular or stopped, administer artificial respiration.

After contact with skin, wash immediately with plenty of water and soap. Remove contaminated, saturated clothing immediately. In case of skin reactions, consult a physician.

In case of contact with eyes flush immediately with plenty of flowing water for 10 to 15 minutes holding eyelids apart and consult an ophthalmologist. Protect uninjured eye. Remove contact lenses, if present and easy to do. Continue rinsing.

If accidentally swallowed rinse the mouth with plenty of water (only if the person is conscious) and obtain immediate medical attention. Do NOT induce vomiting. Give nothing to eat or drink.

The product itself does not burn. Co-ordinate fire-fighting measures to the fire surroundings.

no restriction

In case of fire may be liberated: Carbon monoxide, Carbon dioxide (CO2)

DO NOT fight fire when fire reaches explosives. Use water spray jet to protect personnel and to cool endangered containers.

Do not breathe gas/vapour/aerosol. In case of major fire and large quantities: Remove persons to safety. Clear spills immediately.

In case of major fire and large quantities: Remove persons to safety.

Discharge into the environment must be avoided.

Spilled product must never be returned to the original container for recycling. Clean contaminated articles and floor according to the environmental legislation.

Avoid: Inhalation Avoid contact with eyes and skin.

Recommended storage temperature: 15-25 °C. Keep container tightly closed and in a well-ventilated place.

Technical measures and the application of suitable work processes have priority over personal protection equipment. If handled uncovered, arrangements with local exhaust ventilation have to be used.

When handling with chemical substances, protective gloves must be worn with the CE-label including the four control digits. Recommended glove articles DIN-/EN-Norms: EN ISO 374. In the case of wanting to use the gloves again, clean them before taking off and air them well. By short-term hand contact: Suitable material: NBR (Nitrile rubber), Thickness of the glove material: 0,12 mm, Breakthrough time (maximum wearing time): 240-480 min, Recommended glove articles: VWR 112-0998. By long-term hand contact: Suitable material: NBR (Nitrile rubber), Thickness of the glove material: 0,38 mm, Breakthrough time (maximum wearing time): -, Recommended glove articles: VWR 112-3717 / 112-1381.

Eye glasses with side protection DIN-/EN-Norms: DIN EN 166. Recommendation: VWR 111-0432

Respiratory protection necessary at: aerosol or mist formation. Suitable respiratory protection apparatus: Full-/half-/quarter-face masks (DIN EN 136/140). Recommendation: VWR 111-0206. Suitable material: A1. Recommendation: VWR 111-8930

Wear suitable protective clothing. When handling with chemical substances, protective clothing with CE-labels including the four control digits must be worn.

no data available

The product is chemically stable under standard ambient conditions (room temperature).

Vapours can form explosive mixtures with air.

Formation of explosive mixtures with: Oxidising agent, Nitrogen oxides (NOx), Material, oxygen-rich, oxidizing, Nitric acid, Chlorine, Bromine. Exothermic reaction with: Reducing agent, Acid, Acid halides, Alkali (lye), concentrated. Violent reaction with: Alkali metals, Alkaline earth metal. Formation of: Hydrogen.

UV-radiation/sunlight, Heat. This material is combustible and can be ignited by heat, sparks, flames, or other sources of ignition (e.g. static electricity, pilot lights, or mechanical/electrical equipment).

light metals, Plastic articles

no data available

Dispose according to local legislation. Consult the appropriate local waste disposal expert about waste disposal.