PULY CAFF Plus® NSF POWDER/TABLET

remove the injured person from the danger zone to a well-ventilated room; if any symptoms of discomfort should occur, seek medical advice.

rinse the skin immediately using plenty of water and change clothing where necessary. If irritation persists or tissue damage occurs, consult a physician.

remove any contact lenses. Rinse immediately using plenty of water and with eyelids open for at least 10 minutes. Where discomfort persists, immediately consult an ophthalmologist.

Never administer anything orally where the victim is not conscious; rinse the mouth; make sure the person drinks plenty of water; consult a physician.

Use water mist extinguishers, fire-fighting foam, powder, sand, Carbon dioxide (CO2).

Possible formation of carbon monoxide

Personnel not trained to deal with emergency interventions must stay away from the area concerned.

Comply with water protection standards (collect, control, cover).

Carefully collect the leaked product (better where aspirated) and using plenty of water, clean the affected area.

Materials: water

Comply with precautions overseeing the handling of chemical products. Adequately ventilate areas; where necessary, use equipment which feature ventilation devices to stop powder filling up the air. Keep away from food and drinks. Avoid knocking and incorrect handling of packages which may cause the product to leak. During handling, ensure surroundings are clean and organised. Where powder is present, we recommend using suitable protective means: dust mask, gloves and goggles (see section 8).

The product must be stored in areas with alkali-resistant flooring, which are covered, dry, cool and ventilated. Keep the product away from heat sources, central heating (temperature must not exceed 20°C) and it must be shielded from the sun's rays. Keep packages securely closed after use.

Keep away from food and drinks. During handling, ensure surroundings are clean and organised.

Keep the product away from heat sources, central heating.

use rubber gloves (PVC, etc.)

Use protective, airtight goggles in the presence of powder.

Use a dust mask in the presence of powder.

employ clothing which prevents direct contact between the powder and skin.

The product is stable under recommended storage and handling conditions (see section 7).

Avoid releasing the product in the environment and it is good practice to never mix substances and/or chemical preparations.

The alkaline content of the product reacts with acids (chemical reaction) and with substances which generate acids.

Avoid dust formation, heat sources and humidity.

Avoid contact with humidity, strong acids, thin aluminium.

The release of toxic vapours resulting from a fire or high temperatures may present risks.

Small product quantities may be disposed of subject to suitable dilution in water, in sewage water purification systems, or may be overseen by specialist companies dealing with specialist refuse and/or industrial waste disposal, as authorised by designated authorities.

Recover if possible.