NextSDS Logo
Ae

Aerosol Rostumwandler

DANGER Aerosol SDS/MSDS

Chemical Product Identification & Regulatory Data

Official chemical identifiers, CAS numbers, and regulatory compliance information

Basic Product Information

Product Name
Aerosol Rostumwandler
Product Code
REZ838

Regulatory Identifiers

CAS Number
N/A

Chemical Abstracts Service registry number - unique identifier for chemical substances

Uses Information

Identified Uses
painting
Uses Advised Against
No further relevant information available.

Overview

Aerosol Rostumwandler commonly used painting.

Manage Your Safety Data Sheets

Organize and access your chemical safety data with ease.

GHS Hazard Classification & Safety Warnings

Globally Harmonized System (GHS) hazard pictograms, signal words, and safety classifications

Classification Status

Classified

Signal Word

danger (Danger)

Hazard Classifications

Aerosol Category 1 H222
Aerosol Category 1 H229
Eye Irrit. Category 2 H319
Skin Sens. Category 1 H317
STOT SE Category 3 H336

GHS Hazard Pictograms & Safety Symbols

GHS02 GHS Hazard Pictogram: Flammable hazard - Fire risk materials including gases, liquids, and solids

GHS02

GHS07 GHS Hazard Pictogram: Health hazard warning - Materials harmful to health including irritants and sensitizers

GHS07

GHS (Globally Harmonized System) pictograms indicate specific chemical hazard categories and safety precautions

Hazard Statements

  • H222: Extremely flammable aerosol.
  • H229: Pressurised container: May burst if heated.
  • H317: May cause an allergic skin reaction.
  • H319: Causes serious eye irritation.
  • H336: May cause drowsiness or dizziness.

Precautionary Statements

  • P101: If medical advice is needed, have product container or label at hand.
  • P102: Keep out of reach of children.
  • P103: Read carefully and follow all instructions.
  • P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
  • P211: Do not spray on an open flame or other ignition source.
  • P251: Do not pierce or burn, even after use.
  • P271: Use only outdoors or in a well-ventilated area.
  • P302 + P352: IF ON SKIN: Wash with plenty of water.
  • P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
  • P312: Call a POISON CENTER/doctor if you feel unwell.
  • P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.
  • P337 + P313: If eye irritation persists: Get medical advice/attention.
  • P410 + P412: Protect from sunlight. Do not expose to temperatures exceeding 50 C/122 F.
  • P501: Dispose of contents/container in accordance with local/regional/national/international regulations.

Chemical Manufacturers & Supply Chain

Authorized suppliers, manufacturers, and distribution network information

Peter Kwasny GmbH

manufacturer

๐Ÿ“

Heilbronner Str. 96 D-74831 Gundelsheim

๐ŸŒ

DE

๐Ÿ“ž

0049-(0)6269-95-20

24/7 Emergency Response & Poison Control

Critical emergency contact numbers for chemical spills, exposure incidents, and medical emergencies

Emergency Contact

๐Ÿ“ž

+49 6269 95 20

๐ŸŒ

DE

National Poisons Information Service, Birmingham

๐Ÿ“ž

844 892 0111

๐ŸŒ

GB

Chemical Composition & Hazardous Ingredients

Detailed component analysis, concentration ranges, and hazardous substance identification

Product Type

mixture

General Composition

Mixture of substances listed below with nonhazardous additions.

Chemical Components & Hazardous Substances

Chemical Name CAS Number Concentration Hazardous
dimthyl ther
EC: 204-065-8
115-10-6 25-50% โš ๏ธ Hazardous
Acetone
EC: 200-662-2
67-64-1 25-50% โš ๏ธ Hazardous
Propaan-2-ol; Isopropylalcohol; Isopropanol
EC: 200-661-7
67-63-0 5-10% โš ๏ธ Hazardous
METHYLETHYLCETONE
EC: 201-159-0
78-93-3 5-10% โš ๏ธ Hazardous
1-mthoxy-2-propanol
EC: 203-539-1
107-98-2 2.5-5% โš ๏ธ Hazardous
Xyleen (mengsel)
EC: 215-535-7
1330-20-7 2.5-5% โš ๏ธ Hazardous
2-METHOXY-1- METHYLETHYLACETAAT
EC: 203-603-9
108-65-6 1-2.5% โš ๏ธ Hazardous
n-Butyl acetate
EC: 204-658-1
123-86-4 1-2.5% โš ๏ธ Hazardous
reaction product: bisphenol-A-(epichlorhydrin) epoxy resin (number average molecular weight 700-1100
EC: 500-033-5
25068-38-6 1-2.5% โš ๏ธ Hazardous
2-(2-butoxyethoxyethanol)
EC: 203-961-6
112-34-5 1% โš ๏ธ Hazardous

Additional Information

For the wording of the listed hazard phrases refer to section 16.

Emergency First Aid Measures

Critical first aid procedures for chemical exposure incidents and medical emergencies

๐Ÿซ Inhalation Exposure

Supply fresh air and to be sure call for a doctor. In case of unconsciousness place patient stably in side position for transportation.

๐Ÿ–๏ธ Skin Contact

Immediately wash with water and soap and rinse thoroughly.

๐Ÿ‘๏ธ Eye Contact

Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.

๐Ÿฝ๏ธ Ingestion/Swallowing

If symptoms persist consult doctor.

๐Ÿšจ Immediate Medical Attention Required

No further relevant information available.

Medical Treatment

No further relevant information available.

Related Chemical Substances & Alternative Products

Similar chemicals with comparable safety profiles and industrial applications

Technical Specifications & Material Properties

Physical state, chemical properties, melting point, boiling point, and material characteristics

๐Ÿงช Physical State
Aerosol
Critical Property
๐Ÿ“Š Physical State Data
aerosol
๐Ÿ“Š State Under Standard Conditions
Not available
๐Ÿ‘๏ธ Appearance
Not available
๐ŸŽจ Colour
According to product specification
๐Ÿ“Š Colour Intensity
Not available
๐Ÿ“Š Form
Aerosol
๐Ÿ‘ƒ Odor
Characteristic
๐Ÿ“Š Odor Threshold
Not determined.
๐Ÿงช Ph
Not determined.
๐ŸงŠ Melting Point
Undetermined.
Critical Property
๐Ÿ’จ Boiling Point
-24.9 C
Critical Property
๐Ÿ”ฅ Flash Point
<0 C
Critical Property
๐Ÿ“Š Freezing Point
Undetermined.
๐Ÿ“Š Softening Point
Not available
๐Ÿ“Š Solidification Point
Not available
๐Ÿ“Š Cloud Point
Not available
๐Ÿ“Š Crystallisation Point
Not available
๐Ÿ“Š Relative Evaporation Rate
Not available
๐Ÿ’จ Evaporation Rate
Not applicable.
๐Ÿ’จ Vapor Pressure
3,400 hPa
๐Ÿ“Š Vapor Density
Not determined.
๐Ÿ“Š Relative Density
0.8 g/ml
๐Ÿ“Š Bulk Density
Not available
โš–๏ธ Density
Not available
๐Ÿ”ฅ Flammability
Not applicable.
๐Ÿ“Š Upper Explosive Limit
18.6 Vol % (115-10-6 dimethyl ether)
๐Ÿ“Š Lower Explosive Limit
2.6 Vol % (67-64-1 acetone)
๐Ÿ“Š Explosive Limits
Not available
๐Ÿ“Š Auto Ignition Temperature
235 C
๐Ÿ“Š Decomposition Temperature
Not determined.
๐Ÿ’ง Solubility
Not available
๐Ÿ“Š Partition Coefficient
Not determined.
๐Ÿ“Š Solubility In Water
Not miscible or difficult to mix.
๐Ÿ“Š Solubility In Fat
Not available
๐Ÿ“Š Molecular Weight
Not available
๐Ÿ“Š Voc Content
95.50 %
๐Ÿ“Š Metal Corrosion
Void
๐Ÿ“Š Dynamic Viscosity
Not determined.
๐Ÿ“Š Kinematic Viscosity
Not determined.
๐Ÿ“Š Properties Status
Not available

Exposure Controls & Personal Protective Equipment (PPE)

Occupational exposure limits, engineering controls, and required safety equipment

๐Ÿญ Engineering Controls

No further data; see section 7.

๐Ÿงค Hand Protection

Protective gloves. The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. Gloves must be changed after every contamination. The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be observed. For the permanent contact of a maximum of 15 minutes gloves made of the following materials are suitable: butyl rubber, 0,7mm.

๐Ÿ‘๏ธ Eye Protection

Safety glasses. Tightly sealed goggles.

๐Ÿ˜ท Respiratory Protection

When workers are facing concentrations above the exposure limit they must use appropriate certified respirators. Half mask with combination filter, class A1P2 minimum, or breathing mask with outer air supply.

Transportation & Shipping Information

UN numbers, shipping names, transport classes, and regulatory transport requirements

๐Ÿท๏ธ UN Number

UN1950

๐Ÿ“‹ Packing Group

Void

Chemical Safety FAQ & Common Questions

Most frequently asked questions about safety, handling, storage, and regulatory compliance

What is the hazard signal word for Aerosol Rostumwandler?

The signal word for this substance is "danger".

What is the physical form of Aerosol Rostumwandler?

Aerosol Rostumwandler is a aerosol with according to product specification color. It has characteristic odor.

What is Aerosol Rostumwandler used for?

painting

What are the hazard statements for Aerosol Rostumwandler?

This substance has 5 hazard statements: H222: Extremely flammable aerosol. H229: Pressurised container: May burst if heated. H317: May cause an allergic skin reaction. H319: Causes serious eye irritation. H336: May cause drowsiness or dizziness.

What is the melting point of Aerosol Rostumwandler?

The melting point is Undetermined. and the boiling point is -24.9 C.