Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- ARDROX 996PB, Aerosol
- Product Form
- Aerosol
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Red penetrative liquid.
Uses advised against
None known
Manufacturers & Suppliers
Chemetall Ltd.
manufacturer
Denbigh Road 65, Bletchley Milton Keynes MK1 1PB, Great Britain
+44 1908 649333
Sil-Mid Limited
distributor
Roman Park, Roman Way, Coleshill, West Midlands, B46 1HG. UK
01675 432850
Emergency Contacts
Sil-Mid Limited
+44 (0)1675 432850
Monday to Friday, 08:00 – 17:30 – GMT
International emergency number
+49 180 2273-112
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
Hazard Statements
Precautionary Statements
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Blend based on: organic solvent
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 2-(2-butoxyethoxy)ethanol EC: 203-961-6 | 112-34-5 | 10 - 12.5% | Yes |
| 2-Naphthalenol, 1-[[4-(phenylazo)phenyl]azo]-, ar-heptyl ar',ar"-Me derivs. EC: 296-120-8 | 92257-31-3 | 0.5 - 1% | Yes |
| N/A | --- | 20 - 25% | Yes |
Notes
For the classifications not written out in full in this section, including the hazard classes and the hazard statements, the full text is listed in section 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove the affected individual into fresh air and keep the person calm. If symptoms persist, seek medical advice.
Wash affected areas thoroughly with soap and water. If symptoms persist, seek medical advice.
Rinse immediately with plenty of water, also under the eyelids, for at least 30 minutes. Seek medical attention.
Rinse mouth immediately with water. Do not induce vomiting. Seek medical attention.
Immediate Medical Attention
Seek medical attention.
Medical Treatment
Treat according to symptoms (decontamination, vital functions)
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
carbon dioxide, dry powder, alcohol-resistant foam, water spray
water jet
carbon oxides
Cool endangered containers with water-spray.
Firefighter Protection
Wear a self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Do not discharge into drains/surface waters/groundwater. Do not discharge into the subsoil/soil.
Contain and collect spillage with non-combustible absorbent materials. Clean preferably with a detergent; avoid the use of solvents.
Materials: sand, earth, vermiculite, diatomaceous earth
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Provide good ventilation of working area (local exhaust ventilation if necessary). In closed rooms provide exhaust ventilation at floor level. The workplace should be equipped with an emergency shower and eye-rinsing facility. Warn users about safety measures and precautions to prevent accidents.
Keep container dry. Keep container tightly closed in a cool, well-ventilated place. The entrance to storage rooms is to be granted only to appropriately trained personnel. Keep away from heat. Avoid direct sunlight.
The workplace should be equipped with an emergency shower and eye-rinsing facility.
Keep away from sources of ignition - No smoking. Take precautionary measures against static discharges. Vapours may form explosive mixture with air. The relevant fire protection measures should be noted.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Adequate ventilation should be ensured to prevent exposure to hazardous substances.
nitrile rubber (Buna N). Use suitable protective gloves made of nitrile rubber or butyl rubber. Please observe the glove manufacturer's instructions on permeability and ruptur times as well as the specific workplace conditions. Chemical resistant protective gloves (EN 374). Further information on penetration time is available from the manufacturer of the glove. The protection glove should be tested for its specific suitability (e.g. mechanical strength, product compatibility, anti-static properties).
Tightly fitting safety goggles (splash goggles) (e.g. EN 166)
Wear respiratory protection if ventilation is inadequate. (Combination filter EN 14387 AX-P)
Chemical resistant protective clothing according to DIN EN 13034 (Type 6)
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is stable if stored and handled as prescribed/indicated.
No hazardous reactions if stored and handled as prescribed/indicated.
Vapours may form explosive mixture with air.
Avoid all sources of ignition: heat, sparks, open flame. Avoid direct sunlight. Avoid prolonged exposure to extreme heat.
strong oxidizing agents
No hazardous decomposition products if stored and handled as prescribed/indicated.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Observe national and local legal requirements.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1950
- Shipping Name
- AEROSOLS
- Transport Class
- 2.1
- Packing Group
- Not applicable
Regulatory Information
Chemical regulations, safety assessments, and compliance status
For a mixture it is not mandatory to include an exposure scenario in the material safety data sheet.
The general risk management measures related to the physico-chemical hazard of the product are communicated in chapter 2-14 of this SDS; they are to be considered by the (downstream) user when assessing the risks in accordance with his specific operating conditions and workplace environment.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for ARDROX 996PB, Aerosol?
The signal word is danger.
What is the physical form of ARDROX 996PB, Aerosol?
ARDROX 996PB, Aerosol is a aerosol with red color. It has of hydrocarbons odor.
What is ARDROX 996PB, Aerosol used for?
Red penetrative liquid.
What are the hazard statements for ARDROX 996PB, Aerosol?
This substance has 3 hazard statements:
- H222: Extremely flammable aerosol.
- H229: Pressurized container: May burst if heated.
- H319: Causes serious eye irritation.
What is the melting point of ARDROX 996PB, Aerosol?
The melting point is not determined and the boiling point is not determined.