Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- ANCHOR A
Regulatory Identifiers
- CAS Number
- N/A
- REACH No.
- Not applicable (mixture)
Identified Uses
Resin
Uses advised against
No uses advised against
Manufacturers & Suppliers
TEC7
distributor
Industrielaan 5B, B-2250 Olen
+32 14 85 97 37
Novatech International N.V.
manufacturer
Industrielaan 5B, B-2250 Olen
+32 14 85 97 37
Emergency Contacts
BIG
+32 14 58 45 45
24h/24h
EN, FR, DE, NL
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| ethylene dimethacrylate EC: 202-617-2 | 97-90-5 | 10 - 15% | Yes |
| hydroxypropyl methacrylate EC: 248-666-3 | 27813-02-1 | 1 - 10% | Yes |
| quartz (SiO2) EC: 238-878-4 | 14808-60-7 | 1 - 5% | Yes |
| 1,1'-(p-tolylimino)dipropan-2-ol EC: 254-075-1 | 38668-48-3 | 1% | Yes |
Subject to restrictions of Annex XVII of Regulation (EC) No. 1907/2006; For H-statements in full: see heading 16; Substance with a Community workplace exposure limit; Specific concentration limits, see heading 16
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove the victim into fresh air. Respiratory problems: consult a doctor/medical service.
Symptoms: Irritation of the respiratory tract.
Wash immediately with lots of water. Soap may be used. Take victim to a doctor if irritation persists.
Symptoms: No effects known.
Rinse with water. Remove contact lenses, if present and easy to do. Continue rinsing. Take victim to an ophthalmologist if irritation persists.
Symptoms: No effects known.
Rinse mouth with water. Immediately after ingestion: give lots of water to drink. Consult a doctor/medical service if you feel unwell.
Symptoms: No effects known.
Immediate Medical Attention
If applicable and available it will be listed below.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray. ABC powder. Carbon dioxide.
Solid water jet ineffective as extinguishing medium.
Upon combustion: CO and CO2 are formed.
No specific fire-fighting instructions required.
Firefighter Protection
Gloves. Protective clothing. Heat/fire exposure: compressed air/oxygen apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Contain released product.
Scoop solid spill into closing containers.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Keep away from naked flames/heat. Observe very strict hygiene - avoid contact. Keep container tightly closed.
Storage temperature: 5 °C - 25 °C. Store in a cool area. Store in a dry area. Keep container in a well-ventilated place. Keep only in the original container. Meet the legal requirements.
Observe very strict hygiene - avoid contact.
Keep away from naked flames/heat.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Keep away from naked flames/heat. Carry operations in the open/under local exhaust/ventilation or with respiratory protection.
Gloves. Materials: nitrile rubber, Breakthrough time: > 480 minutes, Thickness: 0.5 mm. Materials (good resistance): Nitrile rubber.
Face shield.
Wear gas mask with filter type A if conc. in air > exposure limit.
Protective clothing.
See headings 6.2, 6.3 and 13
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
Heating increases the fire hazard.
Reacts with (strong) oxidizers.
Keep away from naked flames/heat.
Oxidizing agents.
Upon combustion: CO and CO2 are formed.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Remove waste in accordance with local and/or national regulations. Hazardous waste shall not be mixed together with other waste. Different types of hazardous waste shall not be mixed together if this may entail a risk of pollution or create problems for the further management of the waste. Hazardous waste shall be managed responsibly.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for ANCHOR A?
The signal word is warning.
What is the physical form of ANCHOR A?
ANCHOR A is a paste with light beige color. It has characteristic odour odor.
What is the solubility of ANCHOR A?
Water ; insoluble
What is ANCHOR A used for?
Resin
What are the hazard statements for ANCHOR A?
This substance has 2 hazard statements:
- H317: May cause an allergic skin reaction.
- H335: May cause respiratory irritation.
What is the melting point of ANCHOR A?
The melting point is No data available and the boiling point is No data available.