Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Ethanol Solution 70%
- Product Code
- BP8201-1; BP8201-4; BP8201-500
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Laboratory chemicals.
Uses advised against
Food, drug, pesticide or biocidal product use.
Manufacturers & Suppliers
Fisher Scientific Company
undefined
One Reagent Lane Fair Lawn, NJ 07410
(201) 796-7100
Emergency Contacts
CHEMTREC
800-424-9300
CHEMTREC
001-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
Hazard Statements
Precautionary Statements
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Ethylalcohol | 64-17-5 | 70% | No |
| Water | 7732-18-5 | 30% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove to fresh air. If not breathing, give artificial respiration. Get medical attention if symptoms occur.
Symptoms: headache, dizziness, tiredness, nausea and vomiting
Wash off immediately with plenty of water for at least 15 minutes. If skin irritation persists, call a physician.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Get medical attention.
Symptoms: Irritating to eyes.
Clean mouth with water and drink afterwards plenty of water.
Immediate Medical Attention
Get medical attention if symptoms persist or occur, especially after eye contact, or if skin irritation persists.
Medical Treatment
Treat symptomatically
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray, carbon dioxide (CO2), dry chemical, alcohol-resistant foam. Water mist may be used to cool closed containers.
Flammable. Containers may explode when heated. Vapors may form explosive mixtures with air. Vapors may travel to source of ignition and flash back.
Firefighter Protection
As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full protective gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protective equipment as required. Ensure adequate ventilation. Remove all sources of ignition. Take precautionary measures against static discharges.
Do not flush into surface water or sanitary sewer system.
Soak up with inert absorbent material. Keep in suitable, closed containers for disposal. Remove all sources of ignition. Use spark-proof tools and explosion-proof equipment.
Materials: inert absorbent material
Related Substances
Similar chemicals with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Wear personal protective equipment/face protection. Avoid ingestion and inhalation. Ensure adequate ventilation. Do not get in eyes, on skin, or on clothing.
Keep containers tightly closed in a dry, cool and well-ventilated place. Flammables area. Keep away from heat, sparks and flame.
Keep away from open flames, hot surfaces and sources of ignition. Use only non-sparking tools. Keep away from heat, sparks and flame.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure that eyewash stations and safety showers are close to the workstation location. Ensure adequate ventilation, especially in confined areas. Use explosion-proof electrical/ventilating/lighting equipment.
Wear appropriate protective gloves
Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced.
Wear appropriate protective gloves and clothing to prevent skin exposure.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
None known, based on information available
None under normal processing. Hazardous polymerization does not occur.
Incompatible products. Excess heat. Keep away from open flames, hot surfaces and sources of ignition.
Strong oxidizing agents
Carbon monoxide (CO), Carbon dioxide (CO2)
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Should not be released into the environment.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN1170
- Shipping Name
- Ethanol solution
- Transport Class
- 3
- Packing Group
- II
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Ethanol Solution 70%?
The signal word is danger.
What is the physical form of Ethanol Solution 70%?
Ethanol Solution 70% is a liquid appearing as no information available . It has no information available odor.
What is the solubility of Ethanol Solution 70%?
Soluble in water
What is Ethanol Solution 70% used for?
Laboratory chemicals.
What are the hazard statements for Ethanol Solution 70%?
This substance has 2 hazard statements:
- H225: Highly flammable liquid and vapor
- H319: Causes serious eye irritation
What is the melting point of Ethanol Solution 70%?
The melting point is -48 - -37 C / -54.4 - -34.6 F and the boiling point is 85-90 C / 185-194 F @ 760 mmHg.