Ethanol 70% (v/v) TechniSolv®

Remove casualty to fresh air and keep warm and at rest. If breathing is irregular or stopped, administer artificial respiration. Get medical advice/attention.

Remove contaminated, saturated clothing immediately. Wash off any skin contamination immediately. If skin irritation occurs: Get medical advice/attention.

Symptoms: skin irritation

Rinse immediately carefully and thoroughly with eye-bath or water. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Consult an ophthalmologist.

Symptoms: eye irritation

Rinse mouth immediately and drink 1 glass of of water. Never give anything by mouth to an unconscious person or a person with cramps. Get medical advice/attention.

ABC-powder, Carbon dioxide (CO2), Dry sand, Nitrogen

Risk of explosion

Evacuate area. Fight fire remotely due to the risk of explosion.

Stop leak if safe to do so.

Discharge into the environment must be avoided.

Absorb spillage to prevent material damage. Absorb with liquid-binding material.

Materials: liquid-binding material (sand, diatomaceous earth, acid- or universal binding agents)

Wear personal protection equipment (refer to section 8). Avoid contact with eyes and skin. Avoid inhalation of the product.

Keep container tightly closed and in a well-ventilated place.

Wash hands before breaks and after work. Avoid contact with eyes and skin. When using do not eat, drink or smoke. Provide eye shower and label its location conspicuously.

Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.

Technical measures and the application of suitable work processes have priority over personal protection equipment. If handled uncovered, arrangements with local exhaust ventilation have to be used.

When handling with chemical substances, protective gloves must be worn with the CE-label including the four control digits. Recommended glove articles DIN-/EN-Norms EN ISO 374 In the case of wanting to use the gloves again, clean them before taking off and air them well. By short-term hand contact Suitable material: NBR (Nitrile rubber) Thickness of the glove material: 0,38 mm Breakthrough time: 240-480 min Recommended glove articles: VWR 112-3717 / 112-1381 By long-term hand contact Suitable material: NBR (Nitrile rubber) Thickness of the glove material: 0,425 mm Breakthrough time: > 480 min Recommended glove articles: VWR 112-0971

Eye glasses with side protection DIN-/EN-Norms EN 166 Recommendation: VWR 111-0432

Respiratory protection necessary at: aerosol or mist formation Suitable respiratory protection apparatus: Full-/half-/quarter-face masks (EN 136/140) Recommendation: VWR 111-0206 Suitable material: ABEK2P3 Recommendation: VWR 111-0059

Wear suitable protective clothing. When handling with chemical substances, protective clothing with CE-labels including the four control digits must be worn.

The product is chemically stable under standard ambient conditions (room temperature).

Reactive substance. Vapours can form explosive mixtures with air. Risk of ignition.

Violent reaction with: Alkali metals, Acetic anhydride, Peroxides, Nitric acid, Phosphorus oxides (e.g. P2O5), Perchlorates, Halogenated compounds

Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.

Oxidising agent, Peroxides, Strong acid, Hydrogen, arsenic, antimony, Organometallic compounds, Metallic oxides

Decomposition products in case of fire: see section 5.

Dispose according to local legislation. Consult the appropriate local waste disposal expert about waste disposal.

Dispose according to local legislation. Consult the appropriate local waste disposal expert about waste disposal.

Passage forbidden through tunnels of category D when carried in bulk or in tanks. Passage forbidden through tunnels of category E.