NextSDS Logo
Safety Data Sheet EN

Aluminum

CAS 7429-90-5

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Aluminum
Product Code
310360
Chemical Name
Aluminum

Regulatory Identifiers

CAS Number
7429-90-5 Check regulations →

Identified Uses

Laboratory chemicals, Synthesis of substances

Uses advised against

The product is being supplied under the TSCA R&D Exemption (40 CFR Section 720.36). It is the recipient's responsibility to comply with the requirements of the R&D exemption. The product may not be used for a non-exempt commercial purpose under TSCA unless appropriate consent is granted in writing by MilliporeSigma.

Manufacturers & Suppliers

S

Sigma-Aldrich Inc.

manufacturer

3050 SPRUCE ST, ST. LOUIS MO 63103, UNITED STATES

+1 314 771-5765

Emergency Contacts

CHEMTREC

800-424-9300

24 Hours/day; 7 Days/week

CHEMTREC

+1-703-527-3887

24 Hours/day; 7 Days/week

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Combustible dust

GHS Pictograms

Hazard Statements

EUH014 May form combustible dust concentrations in air.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type substance
Chemical Name CAS Number Concentration Hazardous
Aluminium (bulk) EC: 231-072-3 7429-90-5 100% No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

After inhalation: fresh air.

Skin contact

In case of skin contact: Take off immediately all contaminated clothing. Rinse skin with water/ shower.

Eye contact

After eye contact: rinse out with plenty of water. Remove contact lenses.

Ingestion

After swallowing: make victim drink water (two glasses at most). Consult doctor if feeling unwell.

Immediate Medical Attention

Consult doctor if feeling unwell.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.

Unsuitable media

For this substance/mixture no limitations of extinguishing agents are given.

Specific hazards

Aluminum oxide. Not combustible. Risk of dust explosion. Ambient fire may liberate hazardous vapours.

Firefighter Protection

In the event of fire, wear self-contained breathing apparatus.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Observe emergency procedures, consult an expert.

Cleanup methods

Take up dry.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Keep away from open flames, hot surfaces and sources of ignition. Take precautionary measures against static discharge.

Storage

Tightly closed. Dry. Store under inert gas.

Hygiene

Change contaminated clothing. Wash hands after working with substance.

Fire prevention

Keep away from open flames, hot surfaces and sources of ignition. Take precautionary measures against static discharge.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Eyes

Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU). Safety glasses

Respiratory

Recommended Filter type: Filter type P2. The entrepreneur has to ensure that maintenance, cleaning and testing of respiratory protective devices are carried out according to the instructions of the producer. These measures have to be properly documented. required when dusts are generated. Our recommendations on filtering respiratory protection are based on the following standards: DIN EN 143, DIN 14387 and other accompanying standards relating to the used respiratory protection system.

Environmental

Do not let product enter drains.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Lower Explosive Limit
No data available
Melting Point
660.37 °C (1220.67 °F)
Solubility
---
Softening Point
---
Kinematic Viscosity
---
Bulk Density
---
Voc Content
---
Physical State
Wire
Relative Evaporation Rate
---
Solubility In Fat
---
Properties Status
---
Solidification Point
---
Flammability
May form combustible dust concentrations in air.
Density
2.7 g/cm3 at 25 °C (77 °F)
Explosive Limits
---
Colour Intensity
---
Vapor Pressure
No data available
Evaporation Rate
No data available
Partition Coefficient
Not applicable for inorganic substances
Decomposition Temperature
No data available
Crystallisation Point
---
Dynamic Viscosity
---
Physical State Data
solid
Form
Wire
Relative Density
No data available
Flash Point
Not applicable
Boiling Point
2,460 °C 4,460 °F
Colour
---
Appearance
Wire
Odor
No data available
Cloud Point
---
Molecular Weight
---
Ph
No data available
Vapor Density
No data available
State Under Standard Conditions
---
Metal Corrosion
---
Upper Explosive Limit
No data available
Odor Threshold
No data available
Solubility In Water
No data available
Auto Ignition Temperature
No data available
Freezing Point
2,460 °C 4,460 °F
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

The product is chemically stable under standard ambient conditions (room temperature).

Reactivity

No data available

Hazardous reactions

No data available

Avoid

no information available

Incompatible

Strong oxidizing agents

Decomposition

In the event of fire: see section 5

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

Waste material must be disposed of in accordance with the national and local regulations.

Disposal

Leave chemicals in original containers. No mixing with other waste.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
3077
Shipping Name
ENVIRONMENTALLY HAZARDOUS SUBSTANCE, SOLID, N.O.S. (Aluminum)
Transport Class
9
Packing Group
III
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Aluminum?

The signal word is warning.

What is the physical form of Aluminum?

Aluminum is a wire appearing as wire . It has no data available odor.

What is Aluminum used for?

Laboratory chemicals, Synthesis of substances

What are the hazard statements for Aluminum?

This substance has 1 hazard statement:

  • EUH014: May form combustible dust concentrations in air.

What is the melting point of Aluminum?

The melting point is 660.37 °C (1220.67 °F) and the boiling point is 2,460 °C 4,460 °F.