NextSDS Logo
Safety Data Sheet EN

Aluminum nitrate nonahydrate

CAS 7784-27-2

How compliant is your chemical safety?

Free 2-minute compliance assessment

Check Now
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Aluminum nitrate nonahydrate
Product Code
237973

Regulatory Identifiers

CAS Number
7784-27-2 Check regulations →

Identified Uses

Laboratory chemicals, Synthesis of substances

Uses advised against

The product is being supplied under the TSCA R&D Exemption (40 CFR Section 720.36). It is the recipients responsibility to comply with the requirements of the R&D exemption. The product may not be used for a non-exempt commercial purpose under TSCA unless appropriate consent is granted in writing by MilliporeSigma.

Manufacturers & Suppliers

S

Sigma-Aldrich Inc.

undefined

3050 SPRUCE ST ST. LOUIS MO 63103 UNITED STATES

+1 314 771-5765

Emergency Contacts

CHEMTREC

800-424-9300

24 Hours/day; 7 Days/week

CHEMTREC

+1-703-527-3887

24 Hours/day; 7 Days/week

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Eye Dam. Cat. 1 H318

GHS Pictograms

GHS05 - Corrosive

GHS05

Hazard Statements

H318 Causes serious eye damage.

Precautionary Statements

P280 Wear eye protection/ face protection.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes.
P310 Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER/ doctor.

Manage your Safety Data Sheets

Organize and access chemical safety data with ease

Manage SDS
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type Substances
Chemical Name CAS Number Concentration Hazardous
Aluminium nitrate nonahydrate EC: 236-751-8 7784-27-2 100% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

After inhalation: fresh air.

Skin contact

In case of skin contact: Take off immediately all contaminated clothing. Rinse skin with water/ shower.

Eye contact

After eye contact: rinse out with plenty of water. Immediately call in ophthalmologist. Remove contact lenses.

Ingestion

After swallowing: immediately make victim drink water (two glasses at most). Consult a physician.

Immediate Medical Attention

No data available

Related Substances

Similar chemicals with comparable safety profiles

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Hands

This recommendation applies only to the product stated in the safety data sheet, supplied by us and for the designated use. When dissolving in or mixing with other substances and under conditions deviating from those stated in EN 16523-1 please contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de). Full contact Material: Nitrile rubber Minimum layer thickness: 0.11 mm Break through time: 480 min Material tested:KCL 741 Dermatril L. Splash contact Material: Nitrile rubber Minimum layer thickness: 0.11 mm Break through time: 480 min Material tested:KCL 741 Dermatril L

Eyes

Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU). Tightly fitting safety goggles

Respiratory

Recommended Filter type: Filter type P2. The entrepeneur has to ensure that maintenance, cleaning and testing of respiratory protective devices are carried out according to the instructions of the producer. These measures have to be properly documented. required when dusts are generated. Our recommendations on filtering respiratory protection are based on the following standards: DIN EN 143, DIN 14387 and other accompanying standards relating to the used respiratory protection system.

Skin/Body

protective clothing

Environmental

Do not let product enter drains.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Solubility In Fat
---
Solidification Point
---
Crystallisation Point
---
Solubility
---
Auto Ignition Temperature
No data available
Cloud Point
---
Decomposition Temperature
No data available
Freezing Point
---
Voc Content
---
Appearance
Form: crystalline Color: colorless
Softening Point
---
Vapor Pressure
No data available
Form
crystalline
Density
1.72 g/cm3 at 20 C (68 F)
Colour
colorless
Odor Threshold
No data available
Boiling Point
135 C 275 F
Partition Coefficient
Not applicable for inorganic substances n-octanol/water
Bulk Density
---
Explosive Limits
---
Odor
of nitric acid
Relative Density
No data available
Ph
2.5 - 3.5 at 50 g/l at 25 C (77 F)
Melting Point
73 C (163 F)
Colour Intensity
---
Metal Corrosion
---
Evaporation Rate
No data available
Properties Status
---
Vapor Density
No data available
Upper Explosive Limit
No data available
Relative Evaporation Rate
---
Solubility In Water
41.9 g/l at 20 C (68 F) - Regulation (EC) No. 440/2008, Annex, A.6 - completely soluble42.9 g/l at 25 C (77 F) - Regulation (EC) No. 440/2008, Annex, A.6 - completely soluble
Molecular Weight
---
Flash Point
does not flash
State Under Standard Conditions
---
Flammability
The product is not flammable.
Physical State
crystalline
Physical State Data
solid
Lower Explosive Limit
No data available
Kinematic Viscosity
---
Dynamic Viscosity
---
14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Aluminum nitrate nonahydrate?

The signal word is danger.

What is the physical form of Aluminum nitrate nonahydrate?

Aluminum nitrate nonahydrate is a crystalline appearing as form: crystalline color: colorless with colorless color. It has of nitric acid odor.

What is Aluminum nitrate nonahydrate used for?

Laboratory chemicals, Synthesis of substances

What are the hazard statements for Aluminum nitrate nonahydrate?

This substance has 1 hazard statement:

  • H318: Causes serious eye damage.

What is the melting point of Aluminum nitrate nonahydrate?

The melting point is 73 C (163 F) and the boiling point is 135 C 275 F.

Compliance Scan

Free compliance check